?taper

taper 發音

英：[?te?p?r]　　美：[?te?p?(r)]

英：　　美：

taper 中文意思翻譯

taper 常用詞組

taper angle ─── 錐角，錐度角；尖角

taper roller ─── 錐形滾柱

taper roller bearing ─── [機械]圓錐滾柱軸承

taper 短語詞組

taper off

1. 逐漸變細

The animal's tail tapers off to a point.

這動物的尾巴逐漸變細。

1、taper key ─── [機] 斜度鍵

2、taper file ─── [機] 推拔扁銼, 尖頭扁銼

3、morse taper shank drill ─── [機] 莫氏推

4、gib head taper key ─── [化] 鉤頭斜鍵

5、linear taper ─── [電] 線性遞變

6、taper bolt ─── [機] 推拔螺栓

7、clearance taper print ─── [機] 外伸斜度砂心頭

8、audio taper ─── [電] 聲頻遞變

9、left-hand taper ─── [電] 左手遞變

10、right-hand taper ─── [電] 右手遞變

11、taper flask ─── [機] 推拔砂箱

12、taper gauge ─── [機] 推拔規

13、taper off ─── 使一頭逐漸變細, 逐漸停止 [法] 逐漸衰亡, 逐漸消失, 逐漸減少

14、taper case ─── [機] 推拔套箱

15、morse taper ─── [機] 莫氏推拔

16、morse taper trsmer ─── [機] 莫氏推拔絞刀

17、back taper ─── [機] 倒推拔6

18、taper attachment ─── [機] 推拔裝置, 車制推拔之裝置

19、taper hand tap ─── [機] 初道螺絲攻, 手力推拔螺絲攻

taper 詞性/詞形變化，taper變形

復數--tapers；第三人稱單數--tapers；現在分詞--tapering；過去式--tapered；過去分詞--tapered。

taper 特殊用法

1、taper of wedge ─── 楔錐[度]

2、negative taper ─── 倒[起模]斜度

3、linear taper ─── 線性電阻分布特性

4、starting taper ─── 導錐

5、wing taper ─── 翼斜削度

6、jacob's taper ─── 雅可布錐

7、Brown and Sharpe taper ─── 布朗沙普錐度

8、conical taper ─── (波導管)錐形接續器

9、amplitude taper ─── 振幅錐度

10、Morse taper ─── 莫爾斯錐度

11、draw taper ─── 脫模斜度

12、back taper ─── 倒錐

13、tapered taper ─── 分層錐削(電纜終端)

14、Seller's taper ─── 塞勒錐度

15、audio taper ─── 音量補償器

16、stripping [pattern] taper ─── 起[拔]模斜度

17、Jarno taper ─── 賈諾錐度

18、metric taper ─── 公制錐度, 公制退拔

taper 習慣用語

1、taperoff ─── (使)一頭逐漸變細; (使)逐漸減小[停止]; 衰減; 遞減

2、taper [away] down ─── 減少, 削減

taper 相似詞語短語

1、raper ─── n.強奸犯；n.(Raper)人名；(英)雷珀

2、aper ─── n.情況簡介；n.(Aper)（俄、美）阿佩爾

3、tapers ─── n.錐體；逐漸縮減；小蠟燭（taper的復數形式）；v.使逐漸減少；逐漸變尖細（taper的三單形式）

4、caper ─── v.雀躍；n.刺山柑花蕾；不法活動；驚險喜劇片；跳躍；刺山柑；滑稽怪誕的行為；n.(Caper)（美）卡珀（人名）

5、taker ─── n.接受者；接受打賭的人；捕獲者；n.(Taker)人名；(英)塔克

6、japer ─── n.開玩笑的人

7、paper ─── n.紙；論文；文件；報紙；adj.紙做的；vt.用紙糊；用紙包裝；vi.貼糊墻紙；發交通違章傳票；n.(Paper)人名；(俄)帕佩爾

8、tapper ─── n.輕敲者；電報鍵；n.(Tapper)人名；(英、德、瑞典、芬)塔珀

9、gaper ─── n.長蛤；打呵欠的人

taper 常見例句（雙語使用場景）

1、Taper of hole in spindle nose MT No. ─── 主軸錐孔錐度。

2、The two most common taper pipe threads used in the United States are NPT and NPTF. ─── NPT和NPTF螺紋是兩種美國最常用的錐管螺紋。

3、Stop: stop rotating output shaft, cam rollers contact roller cam bearings taper ribbed support of the re-direct. ─── 停止：出力軸停止旋轉，凸輪滾子接觸滾子軸承式凸輪錐度支撐肋的重直部分。

4、The connected curve equation after spreading connected joint of taper container are derived, the new blanking method with computer is put forward. ─── 導出了圓錐形容器接管交線在展開接管表面后的曲線方程，提出了用計算機繪制其交線，即放樣下料的新方法。

5、To shorten and taper(hair) by cutting and thinning. ─── 剪短，剪薄剪成薄的以使（頭發）變短變細、變薄

6、So the effects of self-fields should be considered in designing the Ubitron amplifier. Using wiggler taper, the efficiency is up to 12.3%. ─── 使用搖擺器幅值漸變,器件工作效率從10.9%提高到12.3%。

7、Taper A is taller than taper B. Measure its height from top down. ─── 圓錐比圓錐高。從頂點向下量。

8、It dilates easily and won't bring too much wound with the very smooth anterior taper. ─── 2、前端圓錐順滑，擴張順利，創(chuàng )傷小，減輕患者痛苦。

9、Financial aids generally taper off after the first year of college. ─── 助學金通常在大學一年級之后逐漸減少。

10、The following photos show the blade thickness and distal taper. ─── 以下的是比較不同刀劍的刃厚及其變化。

11、Moreoer, infliximab use did not increase the proportion of patients who were able to taper their steroid dosages without relapse. ─── 另外，使用英夫利昔單抗不會(huì )增加減少類固醇用量而不復發的患者比率。

12、Museums often enjoy cheeringly high visitor numbers in the first year or two, but then attendance tends to taper off. ─── 博物館的訪客量往往在第一、二年有較高的人數，隨后便趨于逐年減少。

13、A taper or acute protection tube made from stainless steel is on the front of the products. ─── 產品前端配有錐形或銳角不銹鋼保護管。

14、Well, the leg shall is taper all down the side seam. ─── 喔，褲腿應該沿邊縫逐漸收

15、Taper of bore in spindle center sleeve morse No. ─── 主軸套內孔錐度。

16、Wedge mechanism was adopted in piercing die to achieve side piercing,and the positioning of taper pipe depended upon the conical surface of blanking die itself. ─── 在沖孔模中選用了帶有楔角的斜楔機構來實現側沖,并利用沖裁凹模自身的錐形面實現了錐形管的定位。

17、To introduce the structure characteristics of dismoumtable drawing die having taper fit. ─── 介紹可拆卸式拉絲模具有錐形配合的結構特點;

18、Muzzle--Muzzle of medium length and medium width, neither coarse nor snipy;should taper toward the nose and be in proportion to the size of the dog and the width of skull. ─── 口吻：中等長度、中等寬度，既不粗糙、也不過長，向鼻鏡方向略呈錐形，與整體大小及腦袋的寬度成正確的比例。

19、Hong Kong IPOs are now springing back from the slowest first half for six years, but flows could taper off before long. ─── 今年上半年，香港股市的IPO跌至六年來的最低位?，F在，這里的IPO正從這一低位強勁反彈，但其勢頭可能很快又會(huì )減弱。

20、Murray overcome thrust fault of cloth Mu taper to discover uraniferous mineral in laborious. ─── Murray先生在辛克布姆錐形沖斷層發現含鈾礦物。

21、Total runout requires determining the full indicator movement over the entire feature.Total runout, therefore, detects any changes in size, i.e. barreling, waisting or taper. ─── 全跳動是對整個被測圓柱（旋轉和移動）進行檢測，全跳動能檢測到尺寸的變化（例如，桶形，腰形或錐形）。

22、You can choose ball, bullnose, flat and a variety of taper cutters. ─── 刀具除標準球、平、圓鼻刀外，亦可使用任意角度成形尖刀。

23、Within the gear carrier unit, taper roller bearings are employed almost universally for carrying the input pinion. ─── 在齒輪承運人股，圓錐滾子軸承受雇幾乎普遍進行輸入齒輪。

24、The new structure of a taper pin connection with external thread is introduced. ─── 介紹了一種外端帶有螺紋的圓錐銷聯接的新型結構。

25、The kerf taper is approximately proportional to the traverse speed, but pressure and traverse speed have an inverse effect on it. ─── 壓力越大余紋角度越小，靶距對余紋角度影響不大，余紋曲線相互之間大體平行，且不規則；

26、Tell you to let beautiful hair arrange slippery 3 big principles, teach you to make a taper of a running fire divide very complaisant bright Li Xiufa! ─── 同時也能讓自己有份煥然一新的好心情。

27、Look at the computer. How many centimeters are there in your taper? ─── 師：看電腦是怎樣測量圓錐的高。量一量自己的圓錐的高是多少厘米。

28、Let's do an experiment: Two pupils, please. Please pour into a cylinder with a taper full of water. How many times can we fill up the cylinder? ─── 下面我們來做一個實驗。請兩個同學上來演示,將圓錐裝滿水倒入圓柱,幾次可以將圓柱裝滿?

29、It also requires a degree of skill to taper the dart to achieve a smoothly contoured garment. ─── 同時還需要一定的技術水平來縫合省道從而獲得一個平順的成衣。

30、The code of manufacturer (YS) and the date of manufacture (month and year) are to be stamped warm during the taping operation at middle of the taper. ─── 在封箱時，必須把制造商編碼（YS）以及制造日期（月和年）敲在膠帶的中間。

31、The internal spline (internal gear) with reversed taper teeth is the general method used by autocar and tracter industry to prevent the meshing from dislocating. ─── 倒錐齒內花鍵(內齒輪)是汽車、拖拉機為防止脫檔而常用的方法。

32、A wax taper was placed in his hand but his fingers would not bend, so it was placed between them and held up for him. ─── 一個小蠟燭放在右手手指但不會(huì )重水因此它們之間，舉起放在他。

33、If the taper support ribbed surface and the cam cam rollers have not Sleek, will be for damage to the division. ─── 如果錐度支撐肋的凸輪表面和凸輪滾子之間有不滑順情況，則會(huì )損害到分割器。

34、Probe the kids to know the taper, hold its features and understand its plan. ─── 使學生認識圓錐，掌握圓錐的特征，會(huì )看圓錐的平面圖。

35、The taper of elevators is usually slight, and the difference between the two values is generally small. ─── 升降舵的根梢比通常較小，因而兩個值之間的差別一般不大。

36、Unlike other trees, it doesn't taper very much. It stays fat all the way up. ─── 不像其他樹，它不是越往上越細，而是自下往上一樣粗。

37、Graduation: laborer rotating, contact roller cam roller cam bearings taper ribbed support of the curve. ─── 分度:出力軸旋轉,凸輪滾子接觸滾子軸承式凸輪錐度支撐肋的曲線部分。

38、The Pucara has a low wing with no taper or dihedral on the broad center section. ─── “普卡拉”的低單翼寬大平直，沒有后掠角。

39、Foreface or muzzle is of equal length or slightly shorter than skull when viewed in profile, should taper gradually from stop to tip of nose. ─── 從輪廓上觀察，前臉或口吻：長度與腦袋的長度大致相同，或略短，口吻呈錐形，從止部到鼻尖方向逐漸變窄。

40、The small feeding carriage on the lathe is usually used for cutting the taper surface on the work piece. ─── 車床上的小滑板通常用于切削工件上的圓錐表面。

41、Moreover, infliximab use did not increase the proportion of patients who were able to taper their steroid dosages without relapse. ─── 另外，使用英夫利昔單抗不會(huì )增加減少類固醇用量而不復發的患者比率。

42、Spitz did not fully taper for the trials, because he thought that would leave him flat for the Olympics a few weeks later. ─── 斯皮茨沒有完全為選拔賽減量，因為他認為那樣會(huì )使他在數周后的奧運會(huì )上失去戰斗力。

43、To shorten and taper (hair) by cutting and thinning. ─── 剪短，剪?。杭舫杀〉囊允梗^發）變短變細、變薄

44、Pulleys - Taper lock bushes - Chains Monobloc - Transmission belts Rubber sheets &carpets for... ─── 分類標題：橡膠和塑料管及管道|皮帶輪...

45、The former is deposited by smoothness growth model of smaller molecule, the latter by taper growth model of bigger molecule. ─── 并提出前者為小分子平滑生長模型、后者為大分子錐狀生長模型。

46、Without the misalignment, coupling efficiency increases with the decreasing of taper length. ─── 失配不存在時，耦合效率隨著錐長的增加而減小。

47、The taper of elevators is usually slight, and the difference between the two values is generally small. ─── 升降舵的根梢比通常較小，因而兩個值之間的差別一般不大。

48、Designed to be used with drill, reamer and other shanks which have a morse taper shank. ─── [打印][關閉

49、Quick and simple clamping is achieved by using a friction taper that provides sufficient torque transmission. ─── 在有足夠的帶動轉矩時,采用摩擦圓錐體使夾緊快速又方便.

50、Our main products are taper roller bearing, spherical roller bearing and deep groove ball bearing. ─── 主要生產圓錐滾子軸承、調心滾子軸承、深溝球軸承等。

51、"Your slave Missandei. " Jhiqui had a taper in her hand. "My servant. I have no slaves. " Dany did not understand. "Why does she weep? " ─── “你的女奴彌桑黛?！奔х髂弥?zhù)她一根蠟燭?！拔业钠腿?。我沒有奴隸?！钡つ岵唤??！八秊槭裁纯奁?？”

52、The effects of structure of the coils and taper of the amplifier on the green density and sintered density of ceramic powder PZT were analyzed. ─── 分析了線圈匝數和放大器錐角等因素對壓坯和制品致密度的影響。

53、It has no effect on the thickness or rate of hair regrowth. But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness. ─── 其實這對毛發的濃密度和再生速度都沒有影響，但修剪后的新毛茬末端不像未修剪時那樣逐漸變細，所以給人感覺變粗了。

54、NSN Bearing initiated from deep groove ball beairngs and taper roller bearings and quickens its steps in development recent years. ─── 以生產中小型軸承起家的通用公司在近年來更加堅定了發展步伐。

55、Beside Sister Perpetue, she was the taper beside the candle. ─── 她在佩爾佩迪姆姆身旁，就好象牛脂燭旁的細蠟燭。

56、You would better taper off the amount of time given to rest . ─── 你最好逐漸地減少休息時間。

57、Taper bore of tailstock barrel No. ─── 尾座套筒錐孔錐度。

58、Do you taper the tops and backs, are they thinner along the edge? ─── 你會(huì )逐漸地打薄面板和背板,而在沿著外圍的地方會(huì )打的更薄嗎?

59、Taking up a candlestick, he touched the wick to a lighted taper. ─── 他舉起燭臺，觸摸一根燃著的蠟燭的燭芯。

60、In this method,a new type of thick aperture with a toroidal taper was made to block neutrons(I4MeV).A two-dimensional scintillator array was used as a sensitive neutron detector. ─── 它針對中子射線穿透率高的特點，采用一個圓形雙圓錐型厚孔徑對聚變的靶目標產生高能中子射線投影，用塑膠閃體探測器接收。

61、Taper roller bearigns are generally used to support combined load mainly consisting of radial load. ─── 圓錐滾子軸承主要用以承受徑向載荷為主的徑向與軸向聯合載荷。

62、The control algorithms about DSU,Taper Head,Taper Tail are introduced to ensure flatness by maintaining steady rolling force. ─── 介紹了采用動態設定DSU、Taper Head、Taper Tail控制算法以維持軋制力恒定來保證板形。

63、The technical principle of taper cutting of HS-WEDM was introduced.The parameters setting method and the program processing of taper cutting based on WEDM machine were analyzed. ─── 敘述了高速走絲電火花線切割機床錐度切割的基本原理,對錐度切割中的幾個主要參數進行了分析和理論計算,編制了相應的程序模塊,并給出了計算和編程處理實例。

64、In this paper,we introduce the analysis and design of a new photoelectricity taper tester. ─── 介紹了一種新研制的錐度檢查儀,并就其測量不確定度進行了評定。

65、Effect of main parameters on the maximum reduction is analysed.It is significant to make forming technology of deep tine taper hole formed by open-die extrusion. ─── 分析了各主要參數對極限變形程度的影響規律,對指導制定深小錐孔件開式冷擠壓成形工藝具有重要意義。

66、Coronal of the vi babble before coronal of anterior teeth tooth is too small very small or show taper, when josh grinningly very not beautiful. ─── 前牙牙冠過小 前牙牙冠很小或呈錐形,說笑露齒時很不美觀。

67、He glanced at his own white taper fingers, shuddering slightly in spite of himself. ─── 他瞧瞧自己白而修長的手指，不由自主地微微打了個寒噤。

68、It has no effect on the thickness or rate of hair regrowth.But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness. ─── 實這對毛發的濃密度和再生速度都沒有影響，但修剪后的新毛茬末端不像未修剪時那樣逐漸變細，所以給人感覺變粗了。

69、Is there any taper tap in the house? ─── 工具房里有公錐嗎?

70、How many heights has a taper? ─── 圓錐有多少條高?

71、A single taper flickered in Ambreene's bedchamber as she shot the door bolt into place with steady hands. ─── 臥室的門被牢牢的插上，一只小細蠟燭在里面閃動。

72、A fiber taper can evanescently couple to whispering gallery modes (WGMs) in a planar silica microdisk for observing the optical properties of the microdisk cavity. ─── 使用光纖錐可以通過其產生的倏逝場，來耦合微盤腔中的回音壁模式，從而獲得對微盤腔光學性質的考察。

73、To be fair, the Mustang has been on sale for several months more than the Camaro, so the early demand surge may taper off as time goes on. ─── 公平地說，野馬已銷售數月超過卡瑪洛，因此早期的需求激增可能會(huì )逐漸減少隨著時間的推移.

74、However, they expect its earnings growth to taper off in the current quarter due to strengthening local currency and seasonally higher marketing costs. ─── 但分析師們預計，三星電子的利潤增速第四季度會(huì )逐漸慢下來，原因是韓圓走強以及經季節性因素調整后的營銷成本出現上揚。

75、Drill Type Bit Diameter Buttons,mm Taper Water Hole Part No. mm in Guage Front Angle Button Bits Flat Face&nbs... ─── 品牌: 三山 . 原產地: 中國 . 產品描述: 專業生產各種規格的重型釬具系列產品。

76、A wax taper was placed in his hand but his fingers would not bend, so it was placed between them and held up for him. ─── 一個小蠟燭放在右手手指但不會(huì )重水因此它們之間,舉起放在他。

77、Taper of hob arbor fitting Morse no. ─── 主軸錐孔。

78、Materials: 4 votive candles, 1 taper candle, a chalice with salt-water, a bowl of sand, a cone of sandalwood incense, matches. ─── 工具：四只許愿蠟燭、一只細蠟燭、適量的鹽水裝在酒杯當中、一碗沙、一搓檀香料、火柴。

79、The sides should taper gradually and smoothly from the ears to the end of the black nose, without prominent cheek bones or pinched muzzle. ─── 從耳朵到黑色鼻鏡方向，頭部逐漸變細，但后腦不向外擴張（厚臉皮），口吻也沒有突然變窄的樣子（象被截斷的口吻）。

80、But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness. ─── 但是，未刮凈的汗毛茬會(huì )給人以粗糙的感覺。

81、Other taper degree and bit diameter are available upon request by Customers. ─── 尾孔錐度及大徑可以根據用戶具體情況制定。

82、The stainless steel seat ring is manufactured with a slight inside taper. ─── 不銹鋼閥座密封環制成內部錐度。

83、Taper of Hole in Tailstock No. ─── 尾座套筒錐孔。

84、The stifles are moderately bent and taper smoothly into the hocks. ─── 后膝關節角度恰當，向下逐漸地、平滑地變細，與飛節連接。

85、Variety of scented and unscented candles as well as candle holders.Tea lights, floating, pillar, votive and taper candles all available. ─── 如帶熏香和無味的蠟燭，燭臺，漂浮蠟燭等產品。

86、HIGH CAPACITY. Automotive hubs on taper roller bearings. ─── 大承載量：小型滾軸軸承上的自動輪轂。

87、We first introduced NC machining technology of keyless(shaped shaft-hub)connection parts.Then we present the result of gapless taper fitting of the connection achieved by us. ─── 介紹了成形(無鍵)聯接的軸和轂孔的數控車削技術，取得了帶錐度無間隙配合的結果。

88、PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS. ─── 雙錐套管道接頭。連接尺寸。

89、If the charcoal does fail to light, use a special liquid spray and light it with a long taper. ─── 如果木炭確實點不著，噴一種專用液體噴霧劑，再用一根長蠟燭把它點燃。

機械螺紋標注Rc Rp，R表示什么意思？p呢？

表示用螺紋密封的管螺紋特征代碼，P是代表螺距RC------圓錐內螺紋RP------圓柱內螺紋R-------圓錐外螺紋它們后面的數字代表公稱直徑。 RC,RP,R只是代號而已，圓錐內螺紋翻譯由于為T(mén)aper thread，圓錐外螺紋翻譯為Male cone，圓柱內螺紋翻譯為Parallel internal thread。