?deforming

deforming 發音

英：[d??f??m??]　　美：[d??f??rm??]

英：　　美：

deforming 中文意思翻譯

deforming 詞性/詞形變化，deforming變形

原型:deform

deforming 短語詞組

1、deforming domain ─── 變形域

2、deforming wire ─── 變形絲

3、deforming agent ─── 除沫劑

4、deforming triangle ─── [計]變形三角形

5、deforming define ─── 變形定義

6、deforming mesh ─── 變形網格

7、deforming particle ─── 變形粒子

8、deforming nut ─── 變形螺母

9、deforming lobes ─── 變形葉

10、deforming car crash ─── 變形車禍

11、deforming fingers ─── 手指畸形

12、deforming tendencies ─── 變形趨勢

13、hereditary deforming cbondrodysplasia ─── [醫] 遺傳畸形性軟骨發育異常, 軟骨發育異常

14、deforming force ─── 變形力

15、fetus deforming ─── 費圖斯變形

16、hereditary deforming chondrodystrophy ─── [醫] 遺傳變形性軟骨營養障礙, 軟骨發育異常

17、deforming lens ─── 變形透鏡

18、deforming object ─── 變形對象

deforming 相似詞語短語

1、deworming ─── v.除去（動物身上的）蟲（deworm的現在分詞）

2、reforming ─── n.（使）改正，改造（行為）；改革，改進；改過自新；（石油煉制）重整（reform的現在分詞）

3、disforming ─── 變形

4、befoaming ─── 接受

5、deforcing ─── vt.強占，霸占

6、defoaming ─── adj.消去泡沫的；v.消去…的泡沫（defoam的ing形式）

7、re-forming ─── n.（使）改正，改造（行為）；改革，改進；改過自新；（石油煉制）重整（reform的現在分詞）

8、preforming ─── v.預先形成；預制（preform的現在分詞）

9、performing ─── adj.表演的；履行的；v.表演（perform的ing形式）；履行

deforming 常見例句（雙語使用場景）

1、This paper studies the deforming characteristics of soil and the effect of concrete supporting in the course of synchronous forming of underground warehouse and concrete wall by experiments. ─── 實驗研究了集中裝藥同步成型地下倉及砼倉壁過程中土體變形特點和砼支護的效果。

2、Sometimes, however, the ability of bars to deform appreciably in torsion is put to good use. ─── 但是，有時要利用桿件在扭轉時具有可觀變形的能力。

3、Pustulant tumors that become infested with maggots deform their faces, forcing teeth from their jaws.The devils eventually starve, but not before passing on the virulent cancer. ─── 在膿胞腫瘤出現大量的蛆寄生后，袋獾的面部會(huì )嚴重畸形，使下顎的牙齒突出、無法咬合，染病的袋獾會(huì )先把致命腫瘤傳染給其他個體，最后才挨餓而死。

4、It is the indispensable high-quality house products to be free of climate but deform. ─── 不受氣候影響而變形是不可缺少的優質家居產品。

5、Plastic deformation is the ability of bend or deform before breaking. ─── 塑性變形就是在斷裂前彎曲或變形的能力。

6、Deforming resistance is capability of material resisting deform. ─── 變形抗力是材料本身抵抗塑性變形的能力。

7、Shoes that are too tight deform the feet. ─── 太緊的鞋使腳變形。

8、Patterns will deform under the effect of the forces, so we adopted Jacobi's iteration method to solve the movement equation. ─── 同時采用基于雅可比迭代法的隱式積分方法高效求解了織物的運動方程，不斷顯示服裝的懸垂動畫，并用紋理映射模擬織物的真實效果。

9、You say that sublime pragmatism replace artistic intuition, yet there is little intuition in deforming data, transforming data into shapes. ─── 你們說實用主義取代藝術知覺，在處理數據使得它們形成形式的過程中很少有直覺參與。

10、There is no material but will deform more or less under the action of forces . ─── 在力的作用下，各種材料多少要產生形變。

11、Construction of new buildings or other structures in such an area shall not deform the environmental features of the historical and cultural site. ─── 在這個地帶內修建新建筑和構筑物，不得破壞文物保護單位的環境風貌。

12、The deforming force distribution diagram can powerfully help us solve metal plastic deforming problems by means of model element method. ─── 變形力分布曲線是用模型元法求解金屬塑性成形問題的有力工具;而變形力分布曲線的建立又依據不同模型單元的力學模型。

13、In severe cases, it can deform joints and cripple its victims. ─── 嚴重的病例，可使關節變形，使病人殘廢。

14、To realistically deform the soft tissues, we develop two deformation techniques: hybrid physical-based deformation modeling (HPDM) and synthetic deformation modeling (SDM). ─── 為了使器官快速且逼真地變形，我們提出了兩種軟組織變形的方法：混合式物理變形模塑與綜合式變形模塑。

15、Both the rigid floor slab and the deforming floor slab are taken into account in the structural analysis to verify the rigid floor slab assumption. ─── 為確證樓板平面內無限剛的分析假定，進一步分析比較了在無限剛度及實際樓板變形下，對抗側體系內力分配的影響。

16、After the displacement mapping is set to stone it is possible to deform objects slightly if there is need for more radical features. ─── 如果需要一些整體上的特征，也可以在位移貼圖完成后使該物體產生一點輕微畸變。

17、If conservation planning, wet, dry, the surface of a raisin deform internal concrete binding, but also often lead to cracks. ─── 如養護不周、時干時濕，表面干縮形變受到內部混凝土的約束，也往往導致裂縫。

18、Squash and stretch is a way of deforming an object such that it shows how rigid the object is. ─── 壓縮或伸展是變形一個物體的方式所以它顯示了一個物體有多么硬。

19、The puppetry tools help you deform layers in ways that you had never considered before.With an auto-tracing feature you can quickly start animating with this active tool. ─── 學習如何結合繪畫,運動跟蹤,文本和鍵控,使您可以接近任何動畫或復合效應,有信心能辦得到.

20、Depending on the intensity of the deforming forces the folds may be gentle sharp overturned or overthrust. ─── 根據變形力的強度，褶皺可以是平緩的，陡峭的，倒轉的，或逆掩的。

21、At the same time,using press and feed motion of the idler wheel have blanks deform locally and obtain axissymmetry parts. ─── 同時利用滾輪的壓力和進給運動,使毛坯產生局部變形,最后獲得軸對稱零件。

22、An elastic body tends to return to its original shape or size as soon as the deforming forcere moved. On the contrary, bodies that are not very elastic do not. ─── 一個彈性物體在使之形變的力一撤除，它就回到原來的形狀和大小，反之，那些不太有彈性的物體不會(huì )這樣。

23、To mar or spoil the appearance or shape of;deform. ─── 臺灣島的形狀是一個拉長的橢圓形。

24、It is proved in practice that gangue foundation is apt to give rise to instability to the buildings on it,due to its soft and deforming nature. ─── 實踐證明,煤矸地基為不良軟土地基,工程上具有塑性、流變等不穩定現象,極易造成建筑物失穩。

25、The production of regular deforming steel wire is introduced, and the role of its overall dimension and materials selection related as well. ─── 介紹了規律變形鋼絲的產生、其外形尺寸的作用及其原料選擇。

26、Instantly sealing for the paper board &PP,PVC blister and the paper board not to deform, Instant heating, fully envelop perfectly for blister. ─── PVC泡殼與印刷精美的紙板瞬間接合而紙板不會(huì )變形，瞬熱式，泡殼可完全密封。

27、It was inducted from the point of view of phenomenology that primary effect of concrete shrinkage was to deform and restraint all levels and components of the concrete. ─── 從現象學角度歸納出混凝土收縮的核心作用是使各層次組分產生變形與約束。

28、College graduated， majored in engineering ( mechanical/ automation/ electrical)； familiar with welding， staking， swaging， deforming， embedding etc. ─── 大學機械設計與制造，工業自動化，電氣等專業相關專業畢業；

29、Based on the outcome of the PKM's statics, the magnitude of the PKM's deforming is obtained using the unit payload method, so the static stiffness of a five DOF PKM is gained. ─── 利用上述方法,針對一臺五自由度的并聯機床進行了分析,獲得了其靜剛度。

30、A steady increase of load on a part will cause it to deform gradually. ─── 均勻增加零件的負荷會(huì )使零件逐漸變形。

31、Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform. ─── 以激光為熱源的焊接同樣也可以得到低熱輸入、變形量極少的效果。

32、Deforming temperature of parts has direct effect on extrusion moulds,especially for those of medium or high temperature.So the cooling of moulds is very important. ─── 不同的溫擠壓成形溫度對模具的熱效應不同,特別是中高溫溫擠壓成形,故模具的冷卻顯得尤其重要。

33、Severe variations deform the discharge curves. ─── 嚴重者使放電曲線發生畸變。

34、Concludes from the simulation results obtained with LS-DYNA3D software that the main reason for crackles in the part is the excessive deforming degree at the pre-forming stage. ─── 利用LS-DYNA3D軟件對一噸車前橫梁的沖壓成形過程進行了數值模擬,揭示了零件的開裂問題主要是由于零件在預成形階段變形程度過大造成的.

35、It will deform into an elongated blob. ─── 它會(huì )變形而成為一個拉長了的滴狀體。

36、It starts with a smirk, then it goes to a smile, a grin, a snicker, a titter, a giggle, a chuckle, chortle, laugh, cackle, deform, howl, shriek, roar, convulse and die. ─── 先是傻笑，然后開始微笑，露齒地笑、竊笑、呵呵笑、咯咯笑、吃吃笑、哈哈笑、歡笑、高聲笑、大笑、身體變形、嚎叫、尖聲笑、狂笑、抽搐和死亡。

37、Based on finite element digital forming of large elastoplastic deforming technology, the rebound is simulated, which was applied to the design of forming mould of helical vanes. ─── 基于彈塑性大變形有限元數值成形技術進行了回彈量模擬，并應用于螺旋葉片成形模具設計。

38、He omitted at least two key safety devices, namely the nose cone which prevents the sail from deforming in the wind, and the luff lines which prevent uncontrollable dives. ─── 他省去了至少二關鍵保險裝置，即防止風帆扭屈在風的頂錐和防止無法控制的下潛的逆風行駛線。

39、The visual display of the result data includes structural deforming graph, animation simulation, three dimension image, contour, isosurface and cloud map etc. ─── 在對這些數據的可視化表現可以分為結構變形圖，結構受力動畫模擬，三維圖像，等值線，云圖等。

40、Use the furnace control is the key, overheated is too thin easy to deform, cold shaping would not be too hard. ─── 使用時火候的控制是關鍵，過熱則太稀易變形，冷了又會(huì )太硬無法塑形。

41、Even a very small shearing force will deform a fluid body, but the velocity of the deformation will be correspondingly small. ─── 只要一個很微小的剪切力就會(huì )使流體發生變形，但是變形的速度會(huì )對應比較小。

42、selection of the die material and the deforming equipment is complete. ─── 的計算，選擇了對應的成型設備和模具材料。

43、During the forming process when the ratio of thickness in neighboring regions of a deforming sheet metal drops below the critical magnitude R(subscript C), necking develops. ─── 在薄板成形過程中，當板面內的厚度梯度值小于臨界厚度梯度值R(下標C)時，認為薄板發生頸縮。

44、We report on a case of a deforming arthropathy in a young man with a lysosomal storage disorder. ─── 我們報告一例變形性關節病中的一名年輕男子的溶酶體儲存障礙。

45、For the tunnel built in soft soil, it would deform along with the reconsolidation of disturbed soil, and the structure of tunnel and the operation of metro would be endangered. ─── 對于軟土地區的地鐵隧道來說，下臥擾動土體的再固結使隧道隨之產生變形，從而危及隧道結構和地鐵運營的安全。

46、The hole and edge usually deform in bending procedure, this paper mainly discussed the method of preventing the hole and edge deformation in bending procedure. ─── 在進行孔和邊彎曲的過程中,常時常發生變形的情形,本文主要討論了彎曲時孔、邊變形的原因和對策。

47、It has many advantages, such as high working speed, seal impression is clear and no diffusing, seal surface will not shrink or deform. ─── 它具有制作快捷（戶可即定即做、等、可?。┷E清晰不擴散，印面不收縮、變形的特點。

48、The material in a moon takes time to deform, so the distortion is always out of alignment with the forces that produce it. ─── 衛星中的物質需要時間變形，因此變形方向一定不會(huì )與造成變形的力相同。

49、Comparing with GUI mode,the text-only mode of DEFORM could be in favor of active control of work flow and development of application for user. ─── 同DEFORM軟件的圖形用戶界面模式相比,其文本運行模式有利于用戶靈活控制工作流程和有針對性地進行二次應用開發。

50、In a frontal collision, the car′s nose will deform to absorb the impact energy. ─── 在正面碰撞中，汽車前端會(huì )變形，來吸收撞擊能量。

51、In children, a lack of the vitamin D molecule causes rickets , which softens the bones and causes them to deform or break easily. ─── 以?xún)和瘉?lái)說，缺少維生素D分子會(huì )引起軟骨病，導致骨骼軟化乃至于變形或容易骨折。

52、This computing technology lets the user squeeze out information or put objects in motion by deforming the surface of the computer. ─── 這項計算技術通過擠壓計算機的表面使其變形，來提取信息和移動對象。

53、During the energy accumulation, geostress increases gradually, and correspondingly rock happensto deform. ─── 在能量積聚期間,地壓逐漸增加,相應地巖石發生形變。

54、Based on the cold roll forming steel,its characteristic of roll-forming and deforming rule was analyzed. ─── 以冷彎型鋼中的槽鋼為例,分析了其輥彎成型的特點及變形規律。

55、There is no material but will deform more or less under the action of force. ─── 在力的作用下，沒有一種材料不或多或少地變形。

56、Ice crystals begin to deform measurably under a unidirectional pressure of slightly less than one atmosphere. ─── 在略小于一個單向大氣壓的壓力下，冰晶就產生某種程度的變形。

57、It is assumed in quasi-static simulation that the object is always in static equilibrium while deforming. ─── 準靜態模擬假設物體在形變過程中總處于靜態平衡;

58、Each function in DEFORM preprocessor can be controlled by corresponding script command. ─── DEFORM前處理器中每一項功能的實現,均可用相應的腳本命令控制。

59、Three kinds of techniques for improving the metal fatigue property in industry were introduced,including cold deform strengthening,laser surface treatment and ion implantation. ─── 介紹和論述了冷變形、激光表面處理技術和離子注入三種工業上用于改善金屬材料疲勞性能的強化方法。

60、He saw Jan as though someone had snatched a deforming mask from Jan's face. ─── 他看見了簡的真面目，仿佛有人把一個歪曲形象的面具從簡的臉上撕了下來。

61、The shale beds in between generally deform plastically. ─── 夾在其中的頁巖層通常是塑性變形。

62、Instantly sealing for the paper board& PP, PVC blister and the paper board not to deform, Instant heating, fully envelop perfectly for blister. ─── PVC 泡殼與印刷精美的紙板瞬間接合而紙板不會(huì )變形，瞬熱式，泡殼可完全密封。

63、According to the choice theory of sheet cutting shape based on deforming ample degree,the choice process of sheet cutting shape based on deforming ample degree was given. ─── 基于變形余裕度的沖壓板材成形選擇理論,給出變形余裕度的沖壓板材成形選擇過程。

64、The stress concentration in the imbalanced section of plastically imbalanced casing resulted from uniform load can easily make the casing bending，deforming or breaking out. ─── 套管受到非均勻載荷的作用易產生塑性變形，在應力集中區，易造成套管彎曲、變形或錯斷，用金屬磁記憶技術可有效判斷套管應力集中區域。

65、In severe cases, adhesions immobilize and deform the joints, and adjacent skin, bones, and muscles atrophy. ─── 嚴重病例中，黏連帶造成關節移位和畸形，附近的皮膚、骨骼和肌肉萎縮。

66、This failure of an object to regain its original size and shape as soon as the deforming force is removed is called elastic lag. ─── 一旦形變力除去之后,物體不能恢復原來的大小和形狀,這種現象稱為彈性滯后。

67、In the case of this rendering of the character, though, it is a white coat modeled with his creases that deform thanks to the skin. ─── 在渲染這個人物的時候，雖然，白色外套和身上的皺褶跟隨皮膚的改變而變形。

68、Under load, the working surfaces of the parts rub, overheat and deform. ─── 在負載情況下，零件的工作面摩擦、過熱并變形。

69、On the basis of DEFORM simulation software,the rigid and plastic model have been established. ─── 使用DEFORM有限元模擬軟件,建立剛塑性基本模型;

70、How do engineering materials deform when bearing mechanical loads? ─── 如何做工程材料變形時，軸承機械載荷?

71、This paper analyses die casting process for shell part of thin wall,and a die-casting mould a-dopt pusher mechanism to solve the deforming problem of thin wall die-casting. ─── 分析了薄壁殼體零件壓鑄的工藝性，采用頂板推出機構，解決了薄壁壓鑄件成型推出變形問題。

72、Ice crystals begin to deform measurably. ─── 冰晶就產生某種程度的變形了。

73、And although the three distinct deforming regions are observed in the compression of the foams with different matrix, the differences in their deforming behaviors... ─── 不同基體性質泡沫鋁的壓縮過程均出現三個明顯的變形區域,但變形行為不同。

74、College graduated, majored in engineering ( mechanical/ automation/ electrical); familiar with welding, staking, swaging, deforming, embedding etc. ─── 大學機械設計與制造,工業自動化,電氣等專業相關專業畢業;熟悉焊接,嵌焊,鉚焊,切除,點焊和封口等工藝技術;

75、Real squash and stretch is usually some part of an object deforming differently that just a simple scale up or down. ─── 真正的壓縮和伸展通常是一個物體的某個部分，它不同于只是簡單地縮放。

76、The deforming and cracking reasons of aluminium alloy impregnated carbon-graphite products were analyzed. Some new ways to decrease deforming and crackingare putted. ─── 對浸鋁合金炭石墨制品變形、開裂等原因進行了分析和探討，從而提出了減少變形的一些實際可行的措施。

77、The stress concentration in the imbalanced section of plastically imbalanced casing resulted from uniform load can easily make the casing bending,deforming or breaking out. ─── 套管受到非均勻載荷的作用易產生塑性變形,在應力集中區,易造成套管彎曲、變形或錯斷,用金屬磁記憶技術可有效判斷套管應力集中區域。

78、Yield stress is the stress at which a material begins to deform plastically. ─── 屈服應力是材料開始發生彈性型變時的壓力大小。

79、NIE L,WEN X W,YI ZH CH,et al.Development of DSQ short-based water tube tiltmenter and its calibrating apparatus[J].Crustal Deform Ation and Earthquake,2001,20(3):74-81. ─── [1]聶磊,溫若衛,易治春,等,DSQ型短基線水管傾斜儀及標定裝置的研制[J].地殼形變與地震,2001,20(3):74-81.

80、Do not bend or deform the probes as this could cause irreparable damage. ─── 不能彎曲或毀壞探頭的表面，因為這將導致不可修復的損壞。

81、Compared with the FLD diagram and the results of deforming, the optimized shape of addendum is obtained and the economical and reasonable die construction is designed. ─── 主要研究了不同工藝補充對零件沖壓成形的影響,通過FLD圖和成形結果對比,對工藝補充部分進行調整得到了最優化的拉深件型面,并設計出經濟合理的模具結構。

82、The latest new technology of die &mould heat treatment and common proofing methods against heat treatment deforming are introduced. ─── 介紹了模具熱處理最新技術與常見熱處理變形的預防措施。

83、There is no materials but will deform more or less under the action of forces. ─── 一切材料在力的作用下多少會(huì )變形。

84、The shaft must be strong enough to deliver this twisting force to a loaded axle without deforming or cracking under the strain. ─── 橋一定夠強壯來沒有變形遞送這個扭轉的力量給一個被裝載的輪軸或在緊張之下弄碎。

85、Four structural styles including compression, extension, slipping and overturning are subdividedaccording to the structural deform in Tarim basin. ─── 依據塔里木盆地構造變形特征，可劃分出壓縮、伸展、走滑和反轉四種構造樣式。

86、Deforming temperature of parts has a direct effect on extrusion moulds, especially on those for medium or high temperature.So the cooling of moulds is very important. ─── 不同的溫擠壓成形溫度對模具的熱效應不同，特別是中高溫溫擠壓成形，故模具的冷卻顯得尤其重要。

87、Most are not clinically significant, but they can cause compression of the spinal cord by deforming the vertebral canal or causing instability. ─── 大多數沒有很明顯的臨床表現，但能造成椎管變形從而壓迫脊髓或造成脊椎的不穩定性。

88、Weld interfaces must contact well each other during assembling, and remain perpendicular to the vertical line to minimize deform and displace... ─── 吊裝時盡可能使焊接面與中垂線相互垂宜，減少環、片之間的變形和位移，保證焊縫的氣密性；

89、The inner seat comprises a hollow main body and a rebounding part connected to two inner sides of the main body and capable of deforming. ─── 內座包括中空的主體以及連接該主體上兩內側邊并可變形的回彈部。