?extruder

extruder發音

英：[eks'tru:d?]　　美：[eks'tru:d?]

英：　　美：

extruder中文意思翻譯

n. 擠壓機；壓出機

extruder常見例句

1 、CAD procedure of extruder screw was developed with Visual LISP based on AutoCAD2004, and dialog box of data input was compiled with DCL.───在A(yíng)utoCAD2004平臺上,用VisualLISP語言開發了擠出機螺桿的CAD程序,用對話框控制語言(DCL)編制了螺桿參數輸入對話框。

2 、In this paper, on the basis of intermittent polymerization, twin screw extruder chosen as the reactor, the semi-continuous polymerization of polysulfonamide is investigated.───在間歇式聚合的基礎上，選用雙螺桿擠出機作為反應器，對聚砜酰胺進行了半連續化聚合的研究。

3 、Knowledge of twin screw extruder operation, screw configuration, and how to optimize dispersion of pigments in masterbatch.───懂得如何操作雙螺桿擠出機，熟悉螺桿結構，增強色母中的色粉分散性。

4 、The melt grafting of maleic anhydride (MAH) onto linear low density polyethylene(LLDPE) was initiated by dicumyl peroxide(DCP) in a twin screw extruder.───以過氧化二異丙苯(DCP)為引發劑,在雙螺桿擠出機中進行了馬來酸酐(MAH)熔融接枝線性低密度聚乙烯(LLDPE)的研究,用紅外光譜表征了接枝反應的存在。

5 、The production process of UPVC special section material on the conical twin screw extruder using preplasticizing technique is introduced.───介紹了采用預塑化技術在錐形雙螺桿擠出機上生產UPVC異型材的工藝過程。

6 、The principle and peculiarity of reactive extrusion were reviewed . The structure of reactive extruder, and development of reactive extrusion were also introduced.───介紹了反應擠出的原理和特點、反應擠出機的結構、反應擠出的應用以及反應擠出的發展方向。

7 、It's a double cross, so that you can actually see it both as a cross and then also extruded.─── 這是一個雙十字 你會(huì )看到 一個內十字和一個外十字

8 、The properties, applications and structures of the fluoroplastics extruder are introduced.The main problems in the course of production are illustrated.───敘述了氟塑料推壓機的性能、用途、結構及試制過程中的關鍵問題。

9 、Besides, bigger slendemess ratio of extruder, higher temperature of extruder head and fluxing zone, bigger strainer aperture of die head can raise the pellets productivity.───使用長徑比大的擠出機機軸,提高擠出機均化段和機頭的溫度,增大模頭濾網孔徑,能增加再生粒子的生產率;

10 、Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.───利用ANSYS有限元分析軟件對帶有混合塊的新型錐形雙螺桿的混合段流場進行了三維模擬分析。

11 、With visualization twin screw extruder, the melting progressing of Polypropylene (PP) in intermeshing counter rotating twin screw extrusion was investigated.───借助于玻璃視窗可視化擠出機,對嚙合異向雙螺桿擠出過程中聚合物粉料的熔融進行了實驗研究;

12 、Single screwer extrusion theory is more and more consummate, and some developed countries began to utilize it to design single screw extruder design.───單螺桿擠出理論經過幾十年的發展日趨完善，一些發達國家已經利用單螺桿擠出理論指導單螺桿的設計。

13 、Nanjing Jinji Machinery Co., Ltd. is a development, production and the parallel twin-screw extruder and its related fields of professional firms.───南京金吉機械設備有限公司是一家開發、生產同向平行雙螺桿擠出機及其相關領域的專業廠商。

14 、So there's various different ways of making them, whether they be cut with a knife or they're pulled or they're extruded or they're made like Italian pasta.─── 做面的辦法很多 有刀削面 拉面 用壓面機 或者像意大利通心粉那樣

15 、The Group is in equity alliance with Indalex, the second largest aluminum extruder in North America.───北美第二大鋁型材商鷹都集團透過入股集團附屬公司,與集團結盟。

16 、Low epispastic stuff must use infuse of extruder of screw of force plunger type, because the burden before infuse needs low pressure.───低發泡材料必須用柱塞式螺桿擠出機注入，因為注入前的配料需要低壓。

17 、The way how to improve the design of screw extruder used for hot briquetting process is introduced.───介紹了熱壓型焦工藝設備螺旋擠壓機設計改進情況。

18 、Maleic anhydride(MAH) and styrene(St) melt-grafting onto polypropylene(PP) was conducted in haake torque rheometer and twin screw extruder.───在哈克流變儀和雙螺桿擠出機對苯乙烯(St)/馬來酸酐(MAH)/聚丙烯(PP)熔融接枝進行了研究。

19 、The main products are PET / PLA / PC / PP / PS / PE / ABS / Biodegradable material extruder, thermoforming machine, mould and other auxiliary equipments.───主要產品包括：PET，PLA，PC，PP，PS，PE，ABS，淀粉降解材料的片材擠出機、熱成型機及配套模具、相關輔機等。

20 、The extrusion quality of flaxseed meal was studied with Brabender DSE-25 Twin-Screw Extruder.───利用DSE-25型雙螺桿擠出機對亞麻籽粕進行擠壓膨化質量研究。

21 、In practice,reaction extrusion is a new trend in the extrusion technology.The multiscrew extruder based on co rotating twin screw extruder is an up to date method.───在實驗上，反應擠出技術代表了雙螺桿擠出機開發的趨勢，在此基礎上的多螺桿技術是該領域的新發展。

22 、This line consists of raw material mixer, double-screw extruder, air blower, dryer and coating machine.───寵物食品生產線由拌粉機、雙螺桿擠出機、風送機、干燥機和涂衣機組成。

23 、Nanjing Jinji Machinery Co., Ltd. is a development, production and the parallel twin-screw extruder and its related fields of professional equipment manufacturers.───南京金吉機械設備有限公司是一家開發、生產同向平行雙螺桿擠出機及其相關領域設備的專業廠商。

24 、Plastic Sheet Extruder, Plastic Cup Thermofomring Machine, PE Bubble Film Extruder, PE Stretch Film Extruder, Drinking Straw Making Machine and etc.───塑料片材機,一次性塑料杯成型機,聚乙烯氣墊膜機組,纏繞膜機組,吸管機系列等

25 、Because the next thing you do is you take that flake and you melt it down and extrude it out into these long spaghetti chains and then you chop those up into little pellets or nurdles.─── 因爲要做的下一步 就是將那些小薄片熔化 並擠成像意大利麪條一樣的條狀物 然後將這些塑料條切成丸狀或小球狀

26 、With a windowed twin screw extruder the authors conduct several visualization extrusion experiments.───在可視化雙螺桿擠出實驗的基礎上，闡述了熔融過程中物料運動的多樣性問題。

27 、ABS/PBT blends compatibilized with styrene-maleic anhydride(SMA) was prepared in a corotating twin-screw extruder with different blending procedure.───以苯乙烯-馬來酸酐共聚物(SMA)為增容劑,研究了共混工藝對ABS/PBT共混物聚集態結構和力學性能的影響。

28 、ZCJ series twin-screw extruder is a highly efficient agglomerating and extruding equipment.───ZCJ系列雙螺桿擠出機是一種高效混煉擠出設備。

29 、It is auxiliary to plastic extruder, used for automatic production line of all kinds of plastic products of plastic UPVC, tubular material, different shaped material.───主要和塑料擠出機配套，用于塑料UPVC、型材、管材等各種塑料制品的自動生產線，

30 、Specifically, the 3-roll calender is fed by a conveyor belt transversally sliding through the rolls and by a 2-stage planetary extruder complete with thermoregulation units.───具體的說，3輥壓延機由一個沿輥子橫向滑動的輸送帶和一臺帶有控溫裝置的2段行星螺桿擠出機喂料。

31 、The flow of the pellets into the extruder is more consistent and the behavior during melting is also better.───在擠壓機中的球形顆粒流動更加一致，熔化過程中的表現也很出色。

32 、FTX polygon is a new type of screw element which is invented to meet the higher speed and efficiency development in co-rotating twin-screw extruder.───六棱柱元件是為適應同向雙螺桿擠出機高速高效的發展要求而出現的一種新型混煉元件。

33 、So that the feeding section of the extruder can be filled with enough material and the plastification effect will be better.───因此，喂養節擠出機可以充滿足夠的材料和塑化效果會(huì )更好。

34 、It's called an extruder, but it's really more for creams and gels.─── 那叫擠壓機 但主要是用來生產乳液和凝膠的

35 、It is mainly including the extruder, Die Casting, drooling embossed molding machine, while Waste Recovery, winding machines, etc.───它主要由擠出機,流延模頭,流涎壓紋成型機,廢邊回收裝置,收卷機等組成!

36 、I mix in the slurry real slow, and load 'em all into the extruder.─── 慢慢把漿液攪拌進去 然后倒進擠壓機

37 、The research and development of polyolefin pipe extrusion production line are introduced, in which SRH series co-rotating parallel twin-screw extruder is used as the host machine.───介紹同向平行雙螺桿擠出機擠出聚烯烴管材生產線的開發與研究。

38 、SJSZ series conic twin-screw extruder is professional equipment for extruding kinds of PVC powder.───SJSZ系列錐形雙螺桿擠出機，是一種適合于各類PVC粉料擠出的專用設備。

39 、It was studied that ABS was grafted by MAH, using DTBP as initiator, and reacted in twin-screw extruder.───以二叔丁基過氧化物(DTBP)為引發劑,在反應型雙螺桿擠出機中進行ABS接枝馬來酸酐的研究。

40 、CC/PEP -80/100mm PE foam plate extruder made by Taiwan province is introduced, and also including its production process, major equipments, major materials and products standard.───介紹了臺灣省生產的CC/EOE-80/100型發泡聚乙烯板材擠出機的生產工藝、主要設備、主要原料及產品規格。

41 、In the core pin cylinder extruder, the flow simulate non - Newtonian fluid of the compound was built using the flow analysis network technique.───在銷釘機簡擠出機上，建立非牛頓流體的流動模型，計算出壓力場、流動場和螺桿的特性曲線。

42 、The line is mainly used to produce flow pipe and drainpipe etc. The set is composed of extruder, die...───發布者：吳曉紅所在地：山東青島市行業：機械及行業設備職位：經理工作年限：

43 、It is mainly including the extruder, Die Casting, drooling embossed molding machine, while Waste Recovery, winding machines, etc.!───它主要由擠出機，流延模頭，流涎壓紋成型機，廢邊回收裝置，收卷機等組成！

44 、The types,features and applications of the polymer melt filter for extruder from both domes-tic and foreign producers are introduced.───介紹了國內外擠出機用高分子熔體過濾器的種類、特性和應用。

45 、A thermoplastic polyurethane elastomer was extended in the melt state through twin-screw extruder with prepolymer as chain extender.───修正了嚙合同向雙螺桿擠出機中的聚苯乙烯停留時間分布的一維模擬模型。

46 、Knowledge of General maintenance of twin screw extruder and mixers.───了解攪拌機和雙螺桿擠出機的基本維修。

47 、They're firing up the extruder as we speak.─── 他們現在就在啟動擠壓機準備生產呢

48 、By means of a visualized and clamshell type barrel co-rotating twin-screw extruder, the melting of high density polyethylene(HDPE) in complex screw configuration was investigated.───借助于視窗可視化雙螺桿擠出機與剖分機筒雙螺桿擠出機,對聚合物顆粒在復合螺桿構型中的熔融過程進行了實驗研究。

49 、The plastics engineers were in a constant effort to improve the distributive and dispersive mixing performance of the single screw extruder for many years.───為改善單螺桿擠出機的分散和分布混合能力,國內外塑料工程師們多年來進行了不斷的努力。

50 、This paper teports the study into the relationship between operation parameters and extrusion process as well as corn product chararcteristics in the twin screw extruder.───對食品雙螺桿擠壓機的操作參數與擠出過程及谷物產品特性之間的關系作了試驗研究。

51 、We are professional engages in design and manufacture Extruder Pelletizing Line.───我公司專業從事擠出造粒機的設計，研發，制造。

52 、A single screw extruder equipped with a specially designed slip die was used to study the rheological behavior of polystyrene/polymethyl methacrylate(PS/PMMA)blends.───利用單螺桿擠出機,配備特殊設計的狹縫模頭,在不改變螺桿轉速的情況下獲得流經口模的不同流量,研究了聚苯乙烯(PS)/聚甲基丙烯酸甲酯(PMMA)共混體系的擠出流變行為。

53 、PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix.───以聚丙烯為基體、尼龍6為分散相共混得到分散相成纖的原位復合材料。

54 、The modifying principle of mono-screw extruder and the designing principle of the mold and the property of the UHMWPE pipe were introduced.───介紹了對普通單螺桿擠出機的改造情況,模具的設計原理,以及超高分子量聚乙烯管材的性能等。

55 、A group of key engineers in Ruiya have worked on extruder field for over 20 years since 1980’s.───公司核心群體從事雙螺桿領域已有二十多年歷史。

56 、Its overall objective is to enhance the quality and output of China's large aluminum extrusion production, and establish hydraulic double-action short trip extruder.───總體目標是提高我國特大型鋁型材擠壓生產的質量與產量，并建立油壓雙動短行程擠壓機。

57 、The extrusion system ,the transmission system and the coextrusion die of the novel screw extruder were designed and simulated.───分別對新型螺桿擠出機的擠壓系統，傳動系統，共擠機頭等進行了結構設計與分析。

58 、For pellet mill, extruder, hammer mill, pulverizer, crumbler, rotary screener.───制粒機、膨化機、粉碎機、微粉碎機、破碎機、分級篩等設備配件、易損件。

59 、Equipment melts and extrudes the plastic through a steel plate with holes in it.─── 設備將其融化并從 有洞眼的鋼板擠出

60 、RPS,CPE,PS and PE were melt blended in a reactive extruder at different, temperature.───RPS、CPE、PS、PE在不同溫度下用反應式擠出機熔融共混。

61 、The theory of profile curve design and mathematical model of the extruder were established by using gear meshing theory as well as design method of twin screw pump.───利用雙螺桿泵的設計思想及空間嚙合原理建立差速雙螺桿擠出混煉機的型線設計方法與數學模型。

62 、Various types of mixer, single extruder, twin extruder, die and post extruder system can be assembled with RC90.───各種混合器、單螺桿擠出機、雙螺桿擠出機、模具和后擠出機系統都能與RC90裝配。

63 、The screw configuration of twin-screw extruder had some influence on the phase morphology of immiscible polymer blend.───雙螺桿擠出機螺桿構型對不相容體系共混物的相態結構有一定影響。

64 、It consists of the extruder, the water tank and the granule cutter. The blower can be added according to the customer's request.───主要由擠出機、水槽、切粒機、積料斗組成,根據需要可添加吹風機。

65 、Intermesh Mixer, Hydraulic Pressurizing Kneader, Open Kneader, Extruder, Sheet Preforming Machine Pelletizer, Rubber/Plastics Mixing Line.───咬合式油壓混練機、加壓混合機、開放式混合機、押出機、擠押出片機、造粒機、橡塑膠生產線。

66 、Special and well designed screw enables the raw material to be evenly stay in the extruder.───以及特別設計的螺絲使原料均勻留在擠出機。

67 、In a typical extruder with an L/D >24 normally most of the extension reaction takes place in the first half of the extruder length.───在一個常規的L/D>24壓出機上，絕大部分的延續反應發生在壓出機長度的前半部分。

68 、Main products: conical twin-screw extruder, parallel twin-screw extruder, single-screw extruder, plastic extrusion line and auxiliary equipment, plastic recycling machine.───主要產品：錐形雙螺桿擠出機、平行雙螺桿擠出機、單螺桿擠出機、塑料擠出生產線及其輔機設備、塑料回收設備。

69 、However the homes of the future will not be constrained by today's architectural limitations for these machines can extrude intricate and complex designs.─── 然而未來的住房 不會(huì )像現在一樣受到建筑上的局限 因為這些機器可以實現精細復雜的設計

70 、Beijing Hua Teng Jia He Plastic Extruder Ltd.───北京華騰佳和塑膠擠出機有限公司。

71 、The single screw extruder is an important component in extrusion of polyolefin production.───單螺桿擠出機是一個重要的組成在擠壓聚烯烴生產。

72 、The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.───以過氧化二異丙苯為引發劑，采用單螺桿擠出方法實現了ABS樹脂接枝馬來酸酐。

73 、This shear equipment and the sheet die were successively linked to forepart of the single-screw extruder.───可控剪切專用裝置和片材成型口模依次聯接在擠出機前端。

74 、The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber(CR 244)was introduced.───介紹了用進口雙螺桿擠出機作為粘接型氯丁橡膠(CR244)后處理裝置的工藝流程,探討了其工藝條件及成品橡膠的性能。

75 、Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.───介紹了基于動態成型過程強化分散混煉的方法以及實現這些方法的動態混煉擠出機的結構及工作原理。

76 、The main machine uses frequency conversions for speed requlation,and super-taper twin-screw extruder...───發布者：刁智德所在地：山東青島市行業：機械及行業設備職位：經理工作年限：

77 、Nanjing Feininger Plastic Extruder Manufacturing Co., Ltd.───南京法寧格擠塑設備制造有限公司。

78 、In this study, we proposed a novel one step method in which maleation and reactive blending occur simultaneously in a twin screw extruder.───在本研究中，我們提出了一種新穎的一步法：馬來酸酐化和反應性摻混可以在一臺雙螺桿擠出機里同時進行。

79 、The temperature control system of rubber extruder under the Simens PLC system control is advantageous for the on-site maintenance and monitoring.───使橡膠擠出機的溫度控制系統處于西門子PLC系統管理之中,方便橡膠擠出機的溫控系統的現場維護和監控。

80 、It can be used together with extruder.───可與擠塑連續生產配套使用。

81 、Reciprocating Kneading and Extruding System,Clamshell Barrel Co-rotating Twin screw Extruder,PET Washing Line.───往復式單螺桿混煉擠出機，剖分式同向平行雙螺桿混煉擠出機，PET瓶片清洗生產線.

82 、The unit adopts special-designed SJSZ80 Cone Double-Screw-Stem Extruder, adopts imported freq...───發布者：毛忠梅所在地：江蘇蘇州市行業：機械及行業設備職位：外銷員工作年限：應屆畢業生

83 、The structure, operational principle, characteristic and application of the reciprocating single-screw intermixing extruder developed in China itself are introduced.───介紹我國自行研制的往復式單螺桿混煉擠出機的結構、工作原理、特點及應用等。

84 、The mathematical simulation of disc extruder based on Archimedean helix is intro duced and the physical and mathematical model is established.───介紹了阿基米德螺線磨盤擠出機的數學模擬,建立了磨盤的物理模型和數學模型,并給出了流場的速度分布和壓力分布。

85 、Based on the shear theory of Newtonian viscous liquid, the fusible damp coefficient is established for electromagnetism dynamic polymer Extruder screw s axial vibration system.───對聚合物電磁動態塑化擠出機螺桿軸向振動系統,根據牛頓型粘性流體的剪切理論,確定了聚合物熔體的阻尼系統。

86 、The feasibility of producing modi-fieid starch for soft candy with extrusion was analysed.The trial of candy production was done with double screw extruder.───分析了擠壓法生產軟糖用變性淀粉的可行性,應用雙螺桿擠壓機進行了淀粉軟糖生產的工藝試驗。

87 、Taking DCP as initiator, the reaction rule of different kinds of PE and their blends grafted with MAH in a reactive extruder was studied.───以過氧化二異丙苯(DCP)為引發劑,使用反應擠出機研究了不同種類聚乙烯及其共混物接枝馬來酸酐的反應規律。

88 、Tri-screw extruder should not be applied to the extrudate which should be dealed within a short reactive time.───對反應時間不宜過長的聚合物，應避免使用三螺桿擠出機。

makerbot怎么調整溫度

MakerBot 是一種3D打印機品牌，用于創(chuàng )建物理對象。要調整 MakerBot 打印機的溫度，你可以按照以下步驟進行操作：

打開 MakerBot 打印機：確保打印機已連接電源并打開。

導航到設置菜單：在 MakerBot 打印機的控制面板或觸摸屏界面上，找到設置菜單或選項。

進入溫度設置：在設置菜單中，尋找與溫度相關的選項，通常稱為 "Temperature" 或 "Heat"。

選擇溫度調整：進入溫度設置后，你可能會(huì )看到不同的溫度調整選項，例如打印噴嘴溫度（Extruder Temperature）和熱床溫度（Build Plate Temperature）。選擇你想要調整的溫度選項。

調整溫度：使用打印機的控制面板或觸摸屏界面上的調整按鈕或滑塊，增加或減少溫度值。通常，你可以通過向上或向下箭頭按鈕進行微調，或者通過滑動滑塊來調整溫度。

確認設置：調整溫度后，確認設置以使其生效?？赡苄枰却欢螘r(shí)間，直到打印機達到所設定的溫度。

請注意，具體的操作步驟可能會(huì )因不同的 MakerBot 打印機型號而有所不同。以上步驟提供了一般的指導，但最好還是參考你使用的具體 MakerBot 打印機的用戶手冊或官方文檔，以獲取準確的操作說明。

makerbot怎么調整溫度

以下是調整MakerBot溫度的步驟：

打開MakerBot設備并登錄。

進入設備控制面板，找到溫度設置選項。

根據需要調整溫度設置?？梢哉{整設備溫度，也可以調整打印床的溫度。

調整后，保存溫度設置并退出控制面板。

通過以上步驟，您就可以成功調整MakerBot的溫度了。