?polygon

polygon發音

英：[?p?l?g?n]　　美：[?pɑ:l?gɑ:n]

英：　　美：

polygon中文意思翻譯

n. 多邊形

polygon詞形變化

形容詞: polygonal | 副詞: polygonally |

polygon常見例句

1 、Polygon reflector makes the light even concentrate and smooth.───多棱鏡反光杯，使光線更集中，均勻。

2 、Boundaries of the polygon may extend to infinity.───多角形的邊界可以延伸到無窮遠處。

3 、If the first point in the array is not the same as the last point, those two points are connected to close the polygon.───如果數組中的第一個點與最后一個點不是同一點,則將連接這兩個點以閉合多邊形。

4 、The Renderer receives the polygon data and starts rasterization.───因此，系統提供同樣接口。

5 、It's a quadrilateral, but there's nothing particularly symbolic about a 4sided concave polygon.─── 這是個四邊形 但四邊凹形多邊形 沒什么特別的寓意

6 、A novel algorithm is proposed in the paper for line clipping against a general polygon.───作者單位：中國科學院軟件研究所計算機科學國家重點實驗室;

7 、In addition, if the last point and the first point of the array do not coincide, they specify the last side of the polygon.───另外,如果數組的最后一個點和第一個點不重合,則這兩個點指定多邊形的最后一條邊。

8 、Draws seven red straight lines between the seven points to form a closed polygon.───在七個點之間繪制七條紅色直線以形成一個閉合的多邊形。

9 、Point, line, circle, polygon and Interpolation curve programming.───可以編制點、線、圓、圓弧、多邊形、多點擬合曲線。

10 、Today we're gonna work on interior angles of a convex polygon.─── 今天我們要來學習計算 凸面多邊形的內角

11 、In computer graphics, the simple function for drawingon the screen. Typical primitives are rectangle, line, polygon, etc.───在計算機圖形學中,在熒光屏上繪圖的簡單程序。典型的圖元是長方塊、線段、多邊形等。

12 、A point equidistant from the vertexes of a regular polygon.───中心點，中樞與一正多邊形各角頂點等距的一點

13 、In computer graphics, the simple function for drawing on the screen. Typical primitives are rectangle, line, polygon, etc.───在計算機圖形學中，在熒光屏上繪圖的簡單程序。典型的圖元是長方塊、線段、多邊形等。

14 、Draw the corresponding frequency polygon over the histogram.───于直方圖上繪出相應的頻數多邊形.

15 、Polygonal lighting: Light intensity is calculated for each surface / polygon.───多邊形光照：光照強度是通過計算每個表面/多邊形而得的。

16 、A polygon with eight sides and eight angles.───八邊形，八角形有八條邊和八個角的多邊形

17 、Based on limited balance theory, the formula of force polygon method used to calculate the soil pressure of gravity retainwall for cohesionless soil under water is provided in .───以衡重式擋墻為例,從極限平衡理論出發,推導了無粘性填土在浸水條件下用力多邊形法計算土壓力公式;結合具體工程實例,對延長墻背法和力多邊形法進行了比較。

18 、But a lot of times its just easer to start from a plane or a polygon or even just creating a vert.───但是很多時候從平面或者多邊形甚至只是一個點做起都會(huì )使工作容易很多。

19 、Without modification, the primary VC crystals are formed in the shape of ellipse, square, rhombus and polygon.───初生VC在稀土變質處理前呈橢圓形、方形、菱形和多角形等形態，經稀土變質處理后，完全變成了球形。

20 、The cable shape in the bridge’s completion state is not parabolic, nor catenary.It is between parabola and catenary.Actually it is funicular polygon closer to the catenary.───3)在成橋狀態時主纜的線形既不是拋物線，也不是懸鏈線，而是介于拋物線與懸鏈線之間，更接近于懸鏈線的索多邊形。

21 、Based on the analysis of influencing parameters of the trajectory of the lathe tool,the condition for machining the polygon prism is de...───以車削正四棱柱為例,進行了誤差分析,得到了刀具長度與工件尺寸和容許誤差間的關系。

22 、The perisperm cells are elongated rectangularity, squareshaped or polygon full of starch grains.───外胚乳細胞長條形、方形或多邊形，細胞內充滿淀粉；

23 、The offsetting of the polygon is avoided in this method which is frequently used in other traditional algorithms that may cause interference and error in the pretreatment.───在預排樣時不用進行傳統排樣算法所作的等距放大處理，避免了由此引起的圖形自交干涉和排樣誤差增大的問題。

24 、OPCODE - Opcode is a small collision detection library. It works on all meshes (convex or non-convex), even polygon soups. The current implementation uses AABB-trees.───OPCODE是一個小的沖突檢測庫，它可以在凸起的或是非凸起的嚙合齒輪，甚至是多邊形環境下進行檢測。目前的實現使用了AABB樹。

25 、Because there are four *s inside of the polygon.─── 因為這個多邊形內部有四個三角形

26 、To enclose (a polygon or polyhedron) within a configuration of lines, curves, or surfaces so that every vertex of the enclosed object is incident on the enclosing configuration.───外接圓：用直線、曲線或面的結構圍繞（多邊形或多面體），使被包圍物的每個頂點都內接于該結構

27 、Several compensation measures for polygon effect in chain drive and design principles of large pitch chain conveyors were proposed.───列舉了鏈傳動多邊形效應的補償措施，給出了大節距鏈式輸送機設計的幾個設計原則。

28 、In addition, if the last point and the first point do not coincide, they specify the closing side of the polygon.───另外,如果最后一個點和第一個點不重合,則這兩個點指定多邊形的閉合邊。

29 、Draws six red straight lines between the seven points to form an incomplete polygon.───在七個點之間繪制六條紅色直線以形成一個不完整的多邊形。

30 、Wang Wencheng,Wu Enhua.A new method deciding whether a point is in a polygon or a polyhedron[J].Journal of Software,2000,11(12):1614-1619.───[2]王文成,吳恩華.判斷檢測點是否在多邊形或多面體內的新方法[J].軟件學報,2000,11(12):1614-1619.

31 、Polygon Course: A flight around a course with three or more turn or control points and with return to the departure point.───多邊形航線：三個或更多轉向點或控制點的環繞航線，再返回至出發點的飛行。

32 、A polygon with nine sides.───九邊形

33 、The DrawPolygon method automatically closes the polygon by drawing a line from (30, 60) back to the starting point (0, 0).───DrawPolygon方法通過繪制一條從(30,60)回到起點(0,0)的直線來自動閉合多邊形。

34 、Second Floor: the south walls of the bedroom suites consist of polygon glass windows to let in sunlight and bring in wonderful views.───二層：主臥套房南立面為多邊形玻璃窗，清透明亮，不但迎入宏闊優美的窗景，更迎一室明媚充沛的日光。

35 、In a graphics system: the notion of figure, with such variants as polygon, circle, ellipse, segment and other basic figure types.───一個圖形系統:圖形的概念,包含這些變量,如多角形,圓周,橢圓,線段和其它的基本圖形類型.

36 、In order to represent Archimedes helix with control polygon, we construct Bernstein-like basis.───為了用控制多邊形的方法表示阿基米德螺線,本文構造了擬Bernstein基。

37 、He conceived the first proof that the 17-sided polygon is constructible.───他構思了17邊形可以作圖的第一個證明。

38 、At the same time convert the angle of the polygon at that vertex into a straight angle.───同時把該頂點處多角形的角轉換成平角。

39 、Afterwards, the objects inside the region will be shown in the Criteria "Location inside Polygon" inside the "Search to Select" dialog box.───于前項操作完畢后，系統會(huì )自動選取座落在環域范圍內的所有學校點位。并于圖面上及屬性資料表中顯亮所選物件。

40 、A polygon with12 sides.───十二邊形

41 、Uses a left-handed coordinate system to create a mesh that contains an n-sided polygon.───使用左手坐標系創(chuàng )建包含n邊形的網格。

42 、The terrain where Phoenix set its three legs is relatively flat with polygon -shaped patterns in the ground likely caused by the expansion and contraction of underground ice.───鳳凰號降落在具有多邊形地貌的平原上，而多邊形地貌很有可能是由于火星地下冰多次融化、凝結所導致的。

43 、The equivalent Fresnel numbers of the regular polygon and slit are calculated by using the radius of inscribe circle and half width of the slit as the feature length.───以正多邊形的內切圓半徑和狹縫的半寬度為特征尺度,給出了勻幅平面波入射時正多邊形和狹縫的等效菲涅耳數。

44 、It is also create a rule in the GIMP or irregular polygon of the most simple way.───它也是在 GIMP 中創(chuàng )建規則或不規則多邊形的最簡單的方法。

45 、Most objects in Blender are represented by polygons and truly curved objects are often approximated by polygon meshes.───大多數物體是通過多邊形與曲線物體（非常近似于多邊形網格）構成的。

46 、A polygon having five sides and five interior angles.───五邊形有五條邊和五個內角的多邊形

47 、Anisotropic filters compensate for distortion caused by the difference in angle between the texture polygon and the plane of the screen.───各向異性篩選彌補由于紋理多邊形與屏幕平面之間的角度差異所造成的失真。

48 、On the basis of GIS, the methods of flood criticality regionalization are studied by use of overlay analysis of polygon and cluster analysis.And then the flooding risk is mapped.───在地理信息系統平臺上，采用多邊形疊置分析和聚類分析等手段，研究洪水災害危險程度區劃的方法，進而繪制成洪水風險圖。

49 、Figure 7. Ray-casting calculation requires to split each polygon into a set of triangles.───圖七投影計算需要將網面分離成一組組的三角面組成。

50 、With the aid of image of algorithm to apex of polygon with single row,an improved algorithm to apex of polygon were built,a optimum layout system for blanking part was developed.───借鑒單排多邊形頂點算法的思想,構造了改進的多邊形頂點算法,并開發了沖裁件優化排樣系統。

51 、The user can click and drag any handle to reshape the polygon, one segment at a time. This idiom is primarily useful for drawing programs.───使用者可以單擊并拖動任何控制柄調整多邊形的形狀，每次一段，這個習慣用法在繪圖程序中很有用。

52 、DDA include algorithms and breshenham algorithm, the crux Circle Circle and 8 pm, providing seed filling algorithm, polygon painting.───包括DDA算法和breshenham算法，中心點畫圓和8分畫圓，提供種子填充算法，多邊形畫法。-graphics code, the use of the system provides painted point function, together with its own algorithm.

53 、SU Yi-sheng.The Experiment and Analysis of the Circular and Polygon Holes' Honeycombed Steel Beams[J].Journal of Guangxi University:Natural Science Edition,2003,28 (1):5-9.───[8]蘇益聲.圓形孔與多邊形孔蜂窩鋼梁的試驗分析[J].廣西大學學報:自然科學版,2003,28(1):5-9.

54 、The plane figure formed by connecting three points not in a straight line by straight line segments; a three-sided polygon.───三角形一種由直線線段連接不在一條直線上的三點形成的平面圖形；三邊圖形

55 、Typical primitives are rectangle,line,polygon,etc.───典型的單元是長方塊、線段、多邊形等。

56 、Cylinder style shepe,the round light adopts 9688A diamond polygon round light.───圓柱型設計，圓燈套用9688A鉆石多棱形圓燈，構思新穎。

57 、A polygon having seven sides.───七邊形有七條邊的多邊形

58 、Therefore, the rendering of low polygonal surface can reach the same quality as a more complex model of much higher polygon count.───在電腦圖學中，通常使用存有高度場表面的深度資訊的貼圖，對幾何模型上的每一點做位置上的改變。

59 、But if you look at what this is really built out of at its barest level, it's just a bunch of vertices and polygons and, you know, we can go in and we can manipulate these as artists and really change everything that's, you know, that the end user is going to see in the game.─── 然而如果你看看這其實是用什么造出來的 在最初始的階段 它只是一堆頂點和多邊形而已 我們可以進到其中操縱它們 像藝術家一樣 任意地修改 終端用戶將在游戲中看到的物件

60 、Delete the polygon of the nose that is at the 0 x axis so that the face still looks hollow from the side view (Fig. 17).───列開在鼻子下，嘴周?chē)拿?。選擇這些面并向外傾斜。就想圖16那樣，并對齊坐標。

61 、A quadrilateral that can be inscribed in a circle is an example of a cyclic polygon.─── 四個頂點都在同一個圓上的四邊形 可被稱為圓內接四邊形

62 、For example, you can set a custom viewport as well as specify parameters for backface culling, polygon mode, polygon offset, and more.───例如，您可以設置自定義視圖以及指定參數背面撲殺，多邊形模式，多邊形抵消等等。

63 、But that exacerbates the second problem, which is that raster systems are designed to process every polygon in the model, even those hidden from view.───但這會(huì )擴大第二個問題：依據設計，光柵系統會(huì )處理模型中的每個多邊形，即使是視線無法觸及之處。

64 、Number of sides for the polygon; must be greater than or equal to 3.───多邊形的邊數;必須大于或等于3。

65 、LED stars light has five cape star polygon, bullet form, snowflake form, strawberry a form, diamond form, pine tree form etc.───LED 星星燈配裝功能控制器，可以感覺到無比非凡的魅力,讓其體現真星閃爍的生動效果。

66 、Fills the interior of a polygon defined by an array of points specified by Point structures using the specified fill mode.───使用指定的填充模式填充Point結構指定的點數組所定義的多邊形的內部。

67 、The Polygon Mesh Object library.───多邊形網格庫

68 、The following example draws a three-sided polygon.───下面的示例繪制了一個三條邊的多邊形。

69 、The former is bunchy in the lengthways direction, and its transverse shape is irregular ellipse, circular, polygon with cavum.───前者的單纖維橫截面呈不規則的橢圓形、腰圓形和多邊形,且纖維內有中腔,而竹漿纖維呈鋸齒形,截面內分布有很多大小不等的空洞;

70 、One subtree of a node contains all polygons, that are behind the node's polygon plane, other subtree contains all polygons that are in front of the node's polygon plane.───一個子樹的節點包含位于這個節點的平面多邊形后面的所有多邊形，其他子樹的包含了位于這個節點的平面多邊形前面的所有多邊形。

71 、Fills the interior of a polygon defined by an array of points specified by Point structures.───填充Point結構指定的點數組所定義的多邊形的內部。

72 、Figure 19-12: These are vertex handles, so named because there is one handle for each vertex of the polygon.───圖19-14 圖中所示為定點控制柄，之所以如此命名，是因為多邊形的每個定點上都有一個這樣的控制柄。

73 、To enclose(a polygon or polyhedron) within a configuration of lines,curves,or surfaces so that every vertex of the enclosed object is incident on the enclosing configuration.───外接圓用直線、曲線或面的結構圍繞（多邊形或多面體），使被包圍物的每個頂點都內接于該結構。

74 、To enclose(a polygon or polyhedron) within a configuration of lines, curves, or surfaces so that every vertex of the enclosed object is incident on the enclosing configuration.───外接圓用直線、曲線或面的結構圍繞（多邊形或多面體），使被包圍物的每個頂點都內接于該結構

75 、With the background of Point Inclusion Test for Planar Polygon, it evaluates the seven representative algorithms according to the prepositional evaluation index system.───以平面多邊形內外點的判定問題為背景,對于其中7個有代表性的算法,依據前面提及的評價指標體系進行了定量化的評估。

76 、Based on analyzing the demand of NC lathe of machining polygon prism for numerical control system,a prototype is designed,which is refitted from lathe Model CA6140.───在分析車削多面體機床對數控系統要求的基礎上,對CA6140型車床進行改裝,設計了一個原型系統。

77 、Polygon: calculate Full angles and Bi-sect angles.───多邊形：計算全角度和必節角度。

78 、In order to prevent us from drawing one poly more than one time we should have a flag on each polygon which will be set if the poly is drawn for the first time.───為了防止重畫一個多邊形，我們應當在每一個多邊形上做一個標記，當多邊形第一次被畫的時候，設置這個標記（當然畫之前也要檢查這個標記啦，不過肯定影響效率。

79 、FTX polygon is a new type of screw element which is invented to meet the higher speed and efficiency development in co-rotating twin-screw extruder.───六棱柱元件是為適應同向雙螺桿擠出機高速高效的發展要求而出現的一種新型混煉元件。

80 、Two vertexes in adjacent lines are also adjacent on the polygon.───在毗連的線的二個頂點在多角形上也是毗連的。

81 、The triangulating and filling of concave polygon could be widely applied in computer graphics and the field of 3D modeling in geosciences problems.───凹多邊形的三角剖分及其后續填充處理,在計算機圖形學及地學問題三維建模領域有著廣泛地應用。

82 、If the last vertex is identical to the first vertex, it is a closed form and the polyline forms a polygon.───如果最后的頂點與最初的頂點重合，它就是閉合的，也就形成了一個多邊形。

83 、A polygon with ten angles and ten sides.───十邊形有十個角和十條邊的多邊形

84 、A polygon having six sides.───六邊形有六個邊的多邊形

85 、The control points of the rational spline to be constructed were computed simply by the vertices of the given polygon.───在算法中，所有的有理樣條曲線的控制點可以通過對多邊形的頂點簡單計算產生。

c++ 的polygon命令如何使用 20分

Polygon函數功能：該函數畫一個由直線相聞的兩個以上頂點組成的多邊形，用當前畫筆畫多邊形輪廓，用當前畫刷和多邊形填充模式填充多邊形。

函數原型：BOOL Polygon(HDC hdc, CONST POINT *lpPoints, int nCount)；

參數：

hdc：設備環境句柄。

lpPoints：指向用于指定多邊形頂點的POINT結構數組的指針。

nCount：指定數組中頂點個數，此值必須大于等于2。

返回值：如果函數調用成功，返回值非零；如果函數調用失敗，返回值是0。

Windows NT：若想獲得更多的錯誤信息，請調用GetLastError函數。

備注：此多邊形通過畫一條從最后一個頂點到第一個頂點的線段而自動閉合起來。函數Polygon不使用和改變當前位置。

Windows CE：1.0版本只支持凸多邊形。在Windows CE 2.0版本中，此函數等同于在Windows桌面平臺上的函數。

速查：Windows NT：3.1及以上版本；Windows：95及以上版本；Windows CE：不支持；頭文件：wingdi.h；庫文件：gdi32.lib。

c++ 的polygon命令如何使用 20分

polygon { int n; int *x,*y; polygon *next; }

1. 建立該結構的鏈表;

2. 顯示鏈表的各個結點數據;

3. 該鏈表所指向的下一數據；