?hexahedral

hexahedral 發音

英：[?heks??hidr?l]　　美：[?heks??hi?dr?l]

英：　　美：

hexahedral 中文意思翻譯

hexahedral 相似詞語短語

1、hexameral ─── 六角體

2、hemihedral ─── adj.（晶體）半面的，半面形的

3、decahedral ─── adj.十面體的；有十面的

4、hexahedrons ─── n.[數]六面體

5、heptahedral ─── 七面體

6、hexahydrate ─── n.六水合物

7、hexametral ─── 六邊形

8、hexahedron ─── n.[數]六面體

9、hexahedra ─── 六面體（hexahedron的復數）

hexahedral 常見例句（雙語使用場景）

1、Research Progress in Mesh Generation Hexahedral Finite Element ─── 六面體有限元網格生成方法綜述

2、arbitrary collocated hexahedron grids ─── 任意六面體同位網格

3、Based on the meshing equations of bevel gears, using the method of setting solid model by bottom-up and 8-nodes element of hexahedron, its finite element 3D model of three gear tooth is set up. ─── 根據螺旋錐齒輪嚙合方程，采用“自底向上”的實體建模方法和八節點六面體等參元，建立其三齒的有限元分析3D模型；

4、Keywords Programmable logic controller;Hexahedral head hydro-machine;Controlling circuit;Software design; ─── 可編程序控制器;六面頂液壓機;控制線路;軟件設計;

5、Keywords BN fiber;hexahedron phase;tensile strength; ─── BN纖維;六方相;抗張強度;

6、Keywords hexahedron type isolator;experimentation of dynamic and static characteristic;data batch processing; ─── 六面體隔振器;靜、動態試驗;試驗數據批處理;

7、cube is consisted of 8 colorful cubes. ─── 魔方是由8個色彩艷麗的立體魔方組成。

8、Harappan engineers followed the decimal division of measurement for all practical purposes, including the measurement of mass as revealed by their hexahedron weights. ─── 哈拉帕的工程師沿用著十進制的刻度劃分。實際上，包括質量的測量，都是通過他們的六面體法碼而表現。

9、The Relationship Between Angles and Errors at Angle(Edge) Dropping Test of a Packaged Hexahedron and Their Controlling Method ─── 包裝六面體角(棱)跌落時各跌落角誤差的關系及控制方法

10、Generation of finite element hexahedral mesh and its trend of development ─── 有限元六面體網格的典型生成方法及發展趨勢

11、Calculation for equivalent loads of prestress in hexahedron element ─── 六面體單元下預應力等代荷載計算

12、downpour hexahedron ─── 待垮六面體

13、We can now use tetrahedron and hexahedron elements in three-dimensional stress analysis ─── 我們現在在三維應力分析中采用四面體單元和六面體單元。

14、Visualization of section for three-dimensional FEM analysis with hexahedral elements ─── 基于任意六面體單元數據場的剖面可視化算法

15、As for the square and regular hexahedron arrays, there are five items in x direction and nine items in y direction which are forty five items at whole. ─── 本文結果顯示第一種是漏斗型集光器，可以改變漏斗型集光器內部材質來提升光通量;

16、Accordingly, a technique for automatic hexahedron mesh of rock-mass with complex structure was realized using multiply mapping mesh. ─── 在此基礎上，利用多重映射網格，實現了復雜構造巖體六面體網格剖分；

17、This paper deduced a generalized formula for calculating theelectrostatic disturbance torque of gimbaled electrostatically suspended gyro(ESG)with regular hexahedron electrodes arrangement. ─── 本文推導了正六面體電極分布的常平架靜電陀螺儀電場干擾力矩計算的一般公式。

18、Design of the Die for Forming the Hexahedron Block by a Single Drawing ─── 六方料一次拉拔成型模設計

19、Hexahedral structure makes it looks like a pagoda. ─── 六面體結構，形似寶塔，似有塔燈之感。

20、Abstract Isoparametric element of arbitrary hexahedron plays an important role in finite element analysis. ─── 內容摘要 等參數任意六面體單元在有限元分析中有著重要的作用。

21、Shih,Bih-Yaw,1997, “Automatic Hexahedral Mesh Generation”,Ph,D Dissertation, Colrado State University. ─── 施弼耀、陳國雄、劉仁俊、陳昭蓉、楊恭娟和邱郁文，民92年，”管理資訊系統”，滄海書局。

22、A method for creating contour line in 3D 8 noded hexahedral elements is presented. ─── 提出了一種八節點六面體單元的三維場量等值線生成方法。

23、Keywords three-dimensional FEM;hexahedral element;section;visualization;contour;color contour image; ─── 三維有限元;六面體單元;剖面;可視化;等值線;云圖;

24、An iterative algorithm of inverse isoparametric mapping for hexahedral elements ─── 六面體單元等參逆變換的一種迭代解法

25、In this paper, an automatic hexahedron mesh generation method based on the advancing front method is described for the multi-medium 3D complicated domain. ─── 使用自適應有限單元法在三維復雜域內求解水工及巖土工程問題，討論了應用行波法在多介質三維復雜塊體內六面體單元網格的自動生成過程。

26、Appearance Design Patent----supply sample with complete external shape, or hexahedral picture or photo which meet requirement. ─── 外觀設計專利——提供有完整外形的實物、或者符合要求的六面圖或照片。

27、Based on viscosity damping hourglass control method, a one-point integrational hexahedral finite element dynamic explicit algorithm was developed and ironing process simulation was also carried out. ─── 摘要采用黏性阻尼沙漏控制算法，開發了單點積分的八節點六面體單元的有限元動力顯式算法程序，用于模擬厚鈑金件的變薄拉深成形過程。

28、A Modal Experimental Investigation of Hexahedron Flexible Multi-body Truss ─── 六面體柔性桁架多體結構的模態測試實驗研究

29、Smallest outer-contained parallel hexahedron and the smallest outer-contained cylinder ─── 最小外包容平行六面體和最小外包容圓柱

30、Hexahedral mesh generation algorithm of swept volume ─── 掃掠體六面體網格生成算法研究

31、We are OK an enclosed bedroom space regard as one hexahedral. ─── 我們可以把封閉式的臥室空間看做一個六面體。

32、Hexahedral structure makes it looks like a pagoda. ─── 六面體結構，形似寶塔，似有塔燈之感。

33、This paper tries to generalize the throwing objects from the one dimension pin to the convex curve in two dimension,and even the three dimensional regular tetrahedron and regular hexahedron. ─── 在蒲豐投針問題的基礎上,把投擲物由一維的針推廣到二維的凸曲線,三維的正四面體、正六面體;

34、In this paper,strain and stiffness matrix of isoparametric element with eight nodes and hexahedron are derived in detail. ─── 推導了八節點六面體等參單元的應變矩陣、剛度矩陣,對該單元的位移解收斂性和畸變敏感性進行了分析。

35、On the basis of the hexahedral mesh generation method, the ring cross-section grid is achieved through the border node method. ─── 在六面體單元網格生成方法的基礎上，采用邊界節點法實現了環件截面網格剖分；

36、hexahedron phase ─── 六方相

37、tetrakis hexahedron ─── 四重六面體

38、Based on method of HR, refinement of hexahedral finite element mesh is realized by APDL program. ─── 并利用分級剖分法(HR)，通過APDL編程實現接觸區域六面體網格的細化。

39、APPLICATION AND DISCUSSION OF THREE DIMENSIONAL NUMERICAL MANIFOLD METHOD BASED ON HEXAHEDRON ELEMENT ─── 基于六面體覆蓋的三維數值流形方法的理論探討與應用

40、Research on Visualization of Arbitrary Hexahedron Elements Data ─── 基于任意六面體單元數據場的可視化研究

41、Research and Application of the Interpolatory Volumetric Subdivision Scheme over Hexahedral Lattice ─── 六面體插值體細分方法研究與應用

42、Numerical Simulation of Wind Fields around Buildings Using Arbitrary Collocated Hexahedron Grids ─── 建筑風場任意六面體同位網格系統的數值模擬

43、A method for creating contour line in 3D 8 noded hexahedral elements is presented. ─── 提出了一種八節點六面體單元的三維場量等值線生成方法。

44、a new model was created by using hexahedral elements, mapping the node temperature and the equivalent plastic strain on the integration points. ─── 利用六面體單元構建有限元分析模型，映射單元節點的溫度、積分點的等效塑性應變，進行數值分析。

45、We are OK an enclosed bedroom space regard as one hexahedral. ─── 我們可以把封閉式的臥室空間看做一個六面體。

46、This hexahedral included end face, all around establish face and underside 6 place. ─── 這個六面體包括了頂面、四面的立面和底面六個部位。

47、hexahedron synthetic diamond press ─── 六面頂金剛石壓機

48、Three-dimensional Numerical Simulation of Flows in Catalytic Converter with Complex Type Using Hexahedral Mesh ─── 六面體網格下復雜型轉化器的三維數值模擬

49、regular hexahedron group ─── 正六面體群

50、As full hexahedron mesh generation is one of difficulties of mesh generation methods, it's signal to realize full hexahedron mesh generation. ─── 另外,全六面體網格劃分一直是有限元網格劃分中的難點之一,實現開孔構件的全六面體網格劃分具有重要的現實意義。

51、Keywords Hexahedral mesh Surface element layer Finite element simulation Material forming process; ─── 六面體網格;表層網格法;有限元模擬;材料成形;

52、A Hexahedron Generalized Conforming Element with High Accuracy ─── 一種高精度六面體廣義協調元

53、Special type non-standard products: Rectangle type and hexahedron type of hard alloy products and tungsten base high specific alloy products for military application. ─── 異型非標產品系列：合金長條、六方塊、軍工用鎢基高比重合金制品等。

54、hexahedral element mesh ─── 六面體網格

55、Keywords finite element method;hexahedral mesh;grid-based method;surface element layer;remeshing;numerical simulation of metal forming process; ─── 有限元法;六面體網格;柵格法;表層網格法;網格再劃分;體積成形過程模擬;

56、Based on the cross-section grid, the ring hexahedral element is generated by swept method, and the elements and the nodes treated. ─── 依據剖分的截面網格利用掃掠法實現了環件六面體單元的網格生成并對單元和節點進行重排；

57、When using this technique in the finite element simulation of rectangular solid upsetting, the hexahedron remeshing problems are solved well. ─── 將該技術應用于矩形塊體鐓粗過程的有限元模擬中，較好地解決了六面體網格重劃問題。

58、hexahedral volume coordinate method ─── 六面體體積坐標

59、hexahedral bar ─── 六角鋼

60、IMPROVEMENT AND APPLICATION OF CURVILINEAR HEXAHEDRAL EDGE ELEMENTS ─── 曲邊六面體矢量單元的改進與應用

61、For the planes (100) and (111) of two hexahedral and octahedral diamonds, the direction of the diamond during the conditioning is mainly a relatively contributed factor. ─── (100)面與(111)面在六面體與八面體鉆石上之比較，刮擦方向為粗糙度望目值的較大貢獻因子。

62、a hexahedron with six equal squares as faces. ─── 有六個相等的正方形面的六面體。

63、The outer-contained parallel hexahedron smaller then that in the now existing document is presented according to the given point series, and the definition and solution model of smallest outer-contained cylinder are introduced. ─── 摘要根據已給點列，給出了比現有文獻更小的外包容平行六面體，并引進了最小外包容圓柱的定義、求解模型。

64、Keywords BN fiber;hexahedron;tensile strength; ─── 關鍵詞BN纖維;六方相;抗張強度;

65、A Parallel Algorithm Determining Topological Relation Between Cells for Hexahedral Grid in Aerodynamic Analogy ─── 流體力學數值計算中建立六面體網格拓撲關系的并行算法

66、Abstract: Body-fitted hexahedron grid was obtained of high speed train head surface based on mapping approach. ─── 摘 要： 利用映射法生成高速列車頭部流場的六面體貼體網格。

67、2 Novel air conditioned hexahedron cab having wide horizon，damping seal driving comfort and good look. ─── 2、整機造型美觀，更具時代感，新穎的弧型六面體空調駕駛室，視野開闊，密封性能好。

68、Transitional-zone method in hexahedral finite element meshing in geotechnical engineering ─── 巖土工程數值分析中的過渡區方法

69、We can rate enclosed bedroom space hexahedral. ─── 我們可以把封閉式的臥室空間看作一個六面體。

70、Keywords hexahedral element;remeshing;surface offset;numerical simulation;rigid plastic finite element method; ─── 六面體單元;網格再劃分;曲面偏置;數值模擬;剛塑性有限元法;

71、two and a half dimensiona hexahedral meshing ─── 2.5維六面體網格劃分

72、hexahedral element ─── 六面體單元

73、hexahedron element with 9 nodes ─── 六面體9節點單元

74、AUTOMATIC GENERATION AND REGENERATION ALGORITHM OF HEXAHEDRAL MESH ─── 六面體網格自動劃分和再劃分算法

75、cube hexahedron ─── 正六面體

76、This dissertation take the artificial diamond hexahedron press synthesizes PDC as the experimental object, has researched and developed measure system of PDC temperature field. ─── 本文以生產金剛石復合片的人造金剛石六面頂壓機為對象，研制了金剛石復合片溫度場測量系統。

77、hexahedron virus ─── 六面體病毒

78、a regular hexahedron ─── 六面體

79、Keywords Hexahedral mesh Subregion 3D solid Finite element; ─── 六面體網格;子區域;三維實體;有限元;

80、A program HEXCV for three dimensional resin flow process was developed based on the hexahedral element with the finite element/control volume method (FE/CVM). ─── 基于六面體單元,采用有限單元/控制體積方法,開發了三維樹脂流動過程模擬程序HEXCV。

81、Generating method of surface contour lines of eight-node hexahedron element in three dimensional FEM numeric simulation ─── 基于六面體八節點單元的三維有限元數值模擬表面等值線的生成算法

82、Keywords bulk metal forming;numerical simulation;finite element method;hexahedral element;remeshing;distorted mesh;mesh refinement; ─── 塑性成形;數值模擬;有限元法;六面體單元;網格再劃分;畸變網格;質量?jì)?yōu)化;

83、ZHANG Chong-wen,GUI Guo-qing.Establishment of a three-dimensional hexahedral finite dynamic e1ement and its theoretical deduction[J].Journal of Vibration Engineering,1991,4(3):60-65. ─── [6]張崇文,桂國慶.三維動態八結點有限元的建立及理論推導[J].振動工程學報,1991,4(3):60-65.

84、Keywords hexahedral mesh;core mesh;boundary fitting;surface element layer;optimization; ─── 六面體網格;柵格法;核心網格;包絡(luò )表面;網格優化;

85、Keywords arbitrary hexahedron collocated grids;dislocation corrections;finite volume method;SIMPLE algorithm;building wind field; ─── 任意六面體同位網格;錯位修正;有限體積法;SIMPLE算法;建筑風場;

86、WANG Lei,LIU Han-bing,GAO Yi-ping,et al.Assembly Algorithm of Hexahedral Meshes Generation for Thin Wainscot Structure[J].China Journal of Highway and Transport,2005,18(1):51-56. ─── [8]王磊,劉寒冰,高一平,等.薄壁桿件六面體網格剖分的組裝法[J].中國公路學報,2005,18(1):51-56.

87、Induced Permutation Group's Rotation Index of Rotation Group of Cube Hexahedron ─── 正六面體的旋轉群導出的點邊面置換群的輪換指標

88、A kind of complete automatic subdivision method for mesh of hexahedron based on quadratic subdivision of tetrahedron was put forward and the corresponding program was developed. ─── 摘要提出了一種基于四面體二次剖分的六面體網格全自動剖分方法，研制了相應的程序。