?generatrix

generatrix 發音

英：[[?d?en?'re?tr?ks]]　　美：[[?d?en?'re?tr?ks]]

英：　　美：

generatrix 中文意思翻譯

generatrix 詞性/詞形變化，generatrix變形

名詞復數: generatrices |

generatrix 相似詞語短語

1、generatrices ─── n.母線；母面；母點(generatrix的變形)

2、generates ─── [計]生成；發生

3、generating ─── v.產生，生成；引起（generate的現在分詞）

4、generate ─── vt.使形成；發生；生殖；產生物理反應

5、benefactrix ─── n.女施主

6、generalia ─── 廣義

7、generation ─── n.一代；產生；一代人；生殖

8、generated ─── v.產生；引發；生成（generate的過去式及過去分詞）

9、genetrix ─── genetrix公司

generatrix 常見例句（雙語使用場景）

1、Control Technology on Parallel Straight-generatrix Contour-evolution Electrochemical Grinding of Integral Impeller Blade ─── 平行直紋展成電解磨削整體葉輪的控制技術

2、Analysis of Unbalanced Electric Energy of the Generatrix in Transformer Station and Its Solutions ─── 變電所母線電能不平衡原因分析及處理

3、To the production and technics of switchgear and controlgear assemblies, traditional method usually use rounding interface of coppery and aluminous generatrix level off. ─── 在成套電控設備的銅、鋁母線制作工藝過程中,傳統的做法是用滾壓方式進行銅、鋁母線接觸面壓麻校平。

4、The house generatrix is good, lives at the activity appears smooth. ─── 房屋的動線好，家居活動就顯得流暢。

5、The main methods that produce the disturbance by the suppression of power wiring are the power plane law, altogether horizon law and power generatrix law. ─── 抑制電源布線產生的干擾的主要方法有電源平面法、共地平面法和電源母線法；

6、Terrace generatrix ─── 疊層母線

7、At the same time, the company retains the strong class generatrix to enter. ─── 同時，公司保留強勁流動線進。

8、We need to consider the deformation of only one strip parallel to generatrix of the cylinder. ─── 我們只需要考慮一個平行于圓柱母線的窄條的變形。

9、Analysis of Unbalanced Electric Energy of the Generatrix in Transformer Station and Its Solutions ─── 變電所母線電能不平衡原因分析及處理

10、Any diameter in the circle generatrix may be considered as an axis of a sphere.So, on the spherical surface there are three kinds of latitude-circles . ─── (圓母線的任一直徑均可看作是球的軸線，因此，在球面上有三種緯圓．他們分別是正平緯圓，水平緯圓，側平緯圓。

11、We need to consider the deformation of only one strip parallel to generatrix of the cylinder. ─── 我們只需要考慮一個平行于圓柱母線的窄條的變形。

12、Keywords diameter;taper;generatrix straightness;on-line measurement;error-separation; ─── 直徑;錐度;素線直線度;在線測量;誤差分離;

13、direct current generatrix ─── 直流母線

14、Curvilinear generatrix cylinders ─── 曲母線工件

15、Transformer substation including each kind of equipment: Transformer, circuit breaker, load switch, generatrix, current transformer, voltage transformer and so on. ─── 變電站包括各類設備：變壓器、斷路器、負荷開關、母線、電流互感器、電壓互感器等。

16、According to the geometric feature of the rotated parts with curved generatrix including male or female curved outlines,this paper deals with its theoretical roughness of the surface. ─── 針對包括凹凸曲線輪廓的曲母線回轉零件的幾何特征,推導了該類零件車削表面理論粗糙度公式,指出了該類零件車削表面理論粗糙度的影響因素。

17、Formula to evaluate translation of the tooth-surface and the equation to describe the generatrix of the negatively cambered sooth-surface were derived, respectively. ─── 分別推導得到齒面平移距離和內凹齒面母線方程的計算公式。

18、By means of FEA, it is concluded that the stress relief groove with an elliptical generatrix has the best effect of stress relief. ─── 通過有限元計算與分析,得到應力釋放效果最好的是母線為橢圓線的減應力結構。

19、The study result of stress distributing with heavier deflected load on roller has important reference to the generatrix shape-trimming. ─── 還指出，關于較大偏載狀況的滾子接觸應力分布規律的研究，對滾子母線進行合理修形具有參考價值。

20、Generatrix permission pressure drop ─── 母線允許壓降

21、generatrix of tank ─── 構成儲油罐的壁

22、This paper analyses the change process of the voltage applied on the motor groups-the residual voltage in generatrix when the house supply is transfered. ─── 摘要分析廠用電切換時施加在電動機群上的電壓，即母線殘壓的變化過程；

23、Keywords deep bore;linearity;generatrix; ─── 深孔;直線度;母線;

24、The generatrix has two kinds and serveral specifications according to the conductor material and section sizes. The detailed specifications and main technical parameters see attached table. ─── 母線按導電體材料結構和截面幾何尺寸分兩個品種多種規格，具體的品種規格和主要技術參數見表。

25、Scheme and Error Analysis of Generatrix Straightness Measurement for Deep Holes with EST ─── EST法測量深孔母線直線度的方案及其誤差分析

26、Popularly speaking, the generatrix is the human in the indoor outdoor motion spot interconnection line. ─── 通俗地講，“動線”就是人在室內室外移動的點相互連接起來的線路。

27、Experiments and theoretical analysis on the spinning techology of low plasticity double-cone part with curved generatrix were carried out in this paper. ─── 對低塑性材料曲母線雙向錐體形狀零件的旋壓成形工藝進行了大量試驗和深入分析；

28、The generatrix shape of tapered roller processed with centerless grinding was not straight line but curve one. ─── 無心磨削圓錐滾子母線的形狀不是直線,而是凹曲線,分析了生產原因、影響因素,為進一步研究做好了鋪墊。

29、This way not only is applied to analyze spindle system, but also to analyze the rolling element stress distribution along generatrix. ─── 這種分析不僅是主軸系統分析建模的需要，同時還能對滾子沿母線方向的偏載進行分析。

30、Analysis of the Tolerance Range of Linearity of Generatrix of a Cylinder ─── 圓柱面素線的直線度公差帶解析

31、The Study of Dissymmetrical Finishing for Bearing Roller Generatrix Used in High Speed Railway Vehicle ─── 鐵路提速客車軸承滾子母線非對稱修形研究

32、The model equations of outer contour generatrix are constructed by the use of third-order curve interpolation algorithm. ─── 針對外輪廓測量得到的數據，利用三階曲線插值算法計算母線插值點坐標和法向量等數據，構建出外廓形母線模型方程。

33、In electric system, conventionally it is adopted that a generatrix is connected with a transformer in low pressure system due to limitation of the capacity of switch and operation mode. ─── 在電力系統中,由于開關容量及運行方式限制,通常在低壓系統中多采用1段母線、1臺變壓器運行方式。

34、DA includes: framework, power part, amplifier electrical source, excitation commutating part, direct current generatrix and AC generatrix and logic part. ─── DA系列開關功率放大器包括：機架，功率模塊，功放電源模塊，激磁整流模塊，直流母線，交流母線和邏輯模塊。

35、According to the characteristics of large gears and the line group feature of involute spiral surface, the measuring principle of straight generatrix error is stated. ─── 摘要根據大齒輪的特點及漸開線螺旋面的線族特徵，提出基于直母線誤差的測量原理。

36、seal generatrix ─── 封閉母線

37、This paper presents a practical method of directly measuring diame-ter,taper and generatrix straightness of conical workpiece in precision lathe by sep-arating movement errors of mechanical system. ─── 本文提出了一種在精密車床上直接測量錐形工件的直徑、錐度及素線直線度等參數的實用方法。

38、conic section whose plane is not parallel to the axis base or generatrix of the intersected cone. ─── 圓錐的一部分，其切面既不平行于軸和基面，也不平行于圓錐母線。

39、The Application of PLC Control System in the Copper Generatrix Vertical Stroke Vertical Circles the Sieze the Opportunity ─── PLC在銅母線立式繞制機上的應用

40、Keywords Burnishing equipment;Curvilinear generatrix cylinders;Surface roughness; ─── 滾壓裝置;曲母線工件;粗糙度;

41、The fixed curve traversed by a generatrix in generating a conic section or a cylinder. ─── 準線穿過產生圓錐部分或圓柱的母線而形成的固定曲線

42、The generatrix of a geometric figure. ─── 幾何形狀的母量

43、rolling generatrix analysis ─── 滾動母線分析

44、Analyzing Technics Interface of Coppery and Aluminous Generatrix Leveling off Production in Switchgear and Controlgear Assemblies ─── 成套電控設備銅、鋁母線校平工藝淺析

45、Design Method of Cone Disc Generatrix in a Metal V-belt Continuously Variable Transmission ─── 金屬帶式無級變速器錐盤母線的設計方法

46、In order to filter the data sampled from inner-contour generatrix of pipe figure measured by laser, a new effective weighted average recursive filter based on energy difference is proposed. ─── 摘要對基于激光測量的管形零件內輪廓母線采樣數據進行濾波。提出了基于能量差的加權均值遞歸濾波算法。

47、According to the restriction of the generatrix line, Bertrand surface can be constructed with the Bertrand curve with broad sense group. ─── 按照母線的約束，形成廣義白川德曲線族，進而構造出白川德曲面。

48、cuprum generatrix ─── 銅母線

49、the fixed curve traversed by a generatrix in generating a conic section or a cylinder ─── 準線，穿過產生圓錐部分或圓柱的母線而形成的固定曲線

50、median generatrix ─── 中母數

51、key point for re-constructing rotation surface is setting up rotation axis and generatrix. ─── 旋轉面重建的關鍵是確定旋轉軸和母線。

52、The principle working of Disc separator is introduced and the parameters is selected including rotational part thickness , clearance between two dishes, Disc generatrix taper, Disc height and radius. ─── 介紹了碟式離心機的分離原理，進行了離心機主要結構參數的選擇計算，包括轉鼓壁厚、碟片間隙、碟片母線錐角、碟片束高度、碟片內外徑等。

53、Toroid enveloping worm with involute helicoid generatrix ─── 漸開面包絡(luò )環面蝸桿

54、Keywords reflector;generatrix of the reflector;louver efficiency of luminaire;cut off angle;luminous intensity distribution; ─── 反射器;反射器母線;格柵;燈具效率;遮光角;配光;

55、Straight generatrix shape roller and arc generatrix shape roller are incompletely the same in processing. ─── 直形母線與圓弧形母線滾子，在采用無心貫穿磨削時，并不完全相同。

56、Keywords tapered roller;centerless grinding;shape of generatrix; ─── 圓錐滾子;無心磨削;母線形狀;

57、Generatrix cease ─── 母線停運

58、auto electronics is the generatrix of the electrifying of auto application , electronic information technology and electronic technology. ─── 汽車電子是指汽車上應用的電子化和電子信息技術及相關電子技術的總稱。

59、It explains the reason of gentle breeze syntony about sustained tubate generatrix in hydromechanical viewpoint,and puts forworld several methods for avoiding gentle syntony. ─── 用流體力學的觀點解釋了管母線發生微風振動的原因,并提出了防止和消除微風振動的幾種方法。

60、Keywords Large gear;On-machine measurement;Straight generatrix deviation;Rack-shaped-edge probe; ─── 大齒輪;在機測量;直母線偏差;刃邊齒條測頭;

61、This paper analyzes emphatically the feature that the workpiece is located on the V-shape block by outside column surface,and discusses relation of rotor line between outer circle generatrix. ─── 分析工件以外圓柱面在V形塊上定位的特點,明晰工件回轉軸線和外圓母線之間的關系。

62、power generatrix ─── 功率母線

63、Keywords direct current generatrix;fluctuation of electric network;frequency conversion speed control;motor; ─── 直流母線;電網波動;變頻調速;電動機;

64、Keywords trun milling;side generatrix;eccentricity; ─── 正交車銑;側母線;偏心;

65、Toroid enveloping worm pair hich involute holicoid generatrix ─── 漸開線包絡(luò )環面蝸桿副

66、By means of FEA, it is concluded that the stress relief groove with an elliptical generatrix has the best effect of stress relief. ─── 通過有限元計算與分析，得到應力釋放效果最好的是母線為橢圓線的減應力結構。

67、Analysis of Axial Deviation of the Belt in a Metal V-Belt CVT with Straight Generatrix Cones ─── 直母線錐盤金屬帶式無級變速器帶的軸向偏移分析

68、Theory of on-line measuring of a large gear base on straight generatrix error ─── 基于直母線族誤差的大齒輪在機測量原理

69、Heat Equilibrium Calculation of Seal Generatrix Conductor ─── 封閉母線導體熱平衡計算

70、Keywords Straight generatrix error Tooth profile total deviation Spiral line total deviation; ─── 直母線誤差;齒廓總偏差;螺旋線總偏差;

71、Separates with the metal partition board the switch cabinet in vivo part for the circuit breaker room, the host generatrix room, the cable vault and the relay control room. ─── 用金屬隔板將開關柜體內部分隔為斷路器室、主母線室、電纜室和繼電器儀表室。

72、The conclusion of how to determine error between generatrix linearity and axes linearity and how to compensate the error are valuable in measurement of axes linearity of deep bore. ─── 給出的母線與軸線直線度誤差及誤差消除的方法，對深孔直線度的測量具有一定的實用價值。

73、Technical characteristic analysis of generatrix relay protection ─── 母線保護技術特性分析

74、Keywords ball screw shaft;raster displacement sensor;fitting equation of curve;multiple generatrix measurem; ─── 滾珠絲杠;光柵位移傳感器;曲線擬合;多母線測量;

75、compression generatrix slot ─── 密集式母線槽

76、The former is similar to bulge, but the deforming mode of the latter is rolling in which the stress is tensile in generatrix direction and the wall thickness are mainly reduced in this zone. ─── 前者的受力情況類似于脹形,后者為母線方向拉應力作用下的輾壓變形,該區起主要減薄壁厚的作用。

77、The house generatrix is good, lives at the activity appears smooth. ─── 房屋的動線好，家居活動就顯得流暢。

78、A RULED SURFACE WITH ONLY ONE GROUP OF GENERATRIX MAY NOT BE EXPANSIBLE ─── 只有一族直母線的直紋面不一定可展

79、Spin forming technology of curvilinear generatrix parts with inner stiffening rib ─── 帶內加強筋曲母線零件旋壓成形技術

80、enveloping worm with straight line generatrix ─── 直廓環面蝸桿

81、When the generatrix is connected to 3 -phase power supply, the every parallel resistance heats at the same time This makes a continuous heating belt. ─── 當母線通以三相電后，各并聯電阻同時發熱，因而形成一條連續的加熱帶。

82、Looking from company investing return of middle - small company, using compendious method level off interface of coppery and aluminous generatrix. ─── 本文從中、小型成套電氣控制設備廠的投資回報率著眼,采用較簡易方法,闡述用液壓千斤頂對銅、鋁母線接觸面壓麻校平處理。

83、Keywords on-line measurement large gear straight generatrix error rack-head; ─── 在機測量;大型齒輪;直母線誤差;齒條刃邊測頭;

84、The spacial curve is continuous which is formed by straightener roll and tube(bar)tight contact.This curve is taken as generatrix,and is circumgyrated around the axes of straightener roll. ─── 矯直輥與管(棒)材緊密接觸并形成的空間曲線是連續的,以此曲線為母線繞矯直輥軸線旋轉所得的旋轉曲面即為矯直輥輥形的曲面。

85、A conic section whose plane is not parallel to the axis, base, or generatrix of the intersected cone. ─── 圓錐的一部分，其切面既不平行于軸和基面，也不平行于圓錐母線

86、Keywords welding source;TFIH coil;generatrix brazing; ─── 焊接電源;橫向磁通感應線圈;銅排焊接;

87、Keywords Cycloconverter AC-DC-AC converter Power component Main-circuit Energy-saving DC common generatrix system; ─── 交流變頻調速裝置;交-直-交變頻;功率器件;主同路;節能;直流公共母線系統;

88、Electromotor protect with high voltage restrict generatrix. ─── 電動機保護用高壓限流熔斷器母線式及插入式基本參數。

89、When the generatrix is powered, the parallel connection resistance begin to heat.This makes a continuousheating belt. ─── 母線通電后，各并聯電阻發熱，因而形成一條連續的加熱帶。

generate是什么詞性？

generate這個英文單詞是一個動詞，它的中文意思是產生，引起。

舉幾個例子如下

we need someone to generate new ideas.這句話的意思是我們需要有人出新主意。

the research methods of social science generate two kinds of data.社會(huì )科學的研究方法生成兩類數據。

generative的詞根？

詞根是generat，中文意思是有生產力的常見釋義

英[?d?en?r?t?v]

美[?d?en?r?t?v]

adj.

有生產力的;能生產的;有生殖力的;

例句

The Knowledge Base Design of An Expert System Based on Generative Rule

基于產生式規則煤質-爐型耦合專家系統的知識庫設計方案