?brazing

brazing 發音

英：[?bre?z??]　　美：[?br?z??]

英：　　美：

brazing 中文意思翻譯

brazing 短語詞組

1、electrie brazing ─── [電] 電銅焊

2、brazing filler metal ─── [化] 釬料; 硬釬料

3、induction brazing ─── [化] 感應釬焊

4、resistance brazing ─── [化] 電阻釬焊

5、silver-alloy brazing ─── [機] 銀合金硬焊

6、metal dip brazing ─── [機] 浸液硬焊

7、brazing solder ─── [機] 焊銅

8、flame brazing ─── [化] 火焰釬焊

9、torch brazing ─── [化] 吹管硬焊

10、brazing torch ─── [化] 釬炬; 噴燈

11、brazing temperature ─── [化] 釬焊溫度

12、brazing alloy ─── [化] 釬焊合金; 釬料

13、defective brazing ─── [化] 有缺陷的釬焊

14、arc brazing ─── [化] 電弧釬焊

15、brazing lamp ─── [化] 噴燈(釬焊用的)

16、brazing flux ─── [化] 釬劑; 硬釬焊劑

17、salt bath brazing ─── [化] 鹽浴釬焊; 鹽浴釬浸焊

18、salt-bath dip brazing ─── [化] 鹽浴釬焊; 鹽浴釬浸焊

19、gas brazing ─── [機] 氣艷硬焊

brazing 詞性/詞形變化，brazing變形

原型:braze

brazing 相似詞語短語

1、brazening ─── adj.厚顏無恥的；無所顧忌的；黃銅制的；黃銅色的；（聲音）響而刺耳的；vt.厚著臉皮；硬著頭皮；n.(Brazen)（美）巴森（人名）

2、crazing ─── n.銀紋；破裂；龜裂；細裂紋

3、braving ─── v.勇敢面對；冒險；經受困難（brave的現在分詞）

4、braying ─── n.叫聲；洗泥；v.驢叫；發出刺耳的尖聲；粗聲粗氣地說出；搗碎（bray的ing形式）

5、bracing ─── adj.令人振奮的，涼爽的；支撐的；n.支撐，支柱；背帶；v.繃緊，頂?。╞race的現在分詞）

6、razing ─── v.把（城市、建筑物等）夷為平地，徹底摧毀（raze的現在分詞）

7、grazing ─── n.放牧；牧草；v.擦過；抓傷（graze的現在分詞）

8、blazing ─── adj.燃燒的；耀眼的，熾熱的；（力量、速度等）強烈的；（爭論）激烈的；極其憤怒的，情感強烈的；adv.與火或熱量相關地；n.猛烈燃燒的火焰；v.燃燒；閃耀；怒視；（憤怒等情緒）突然爆發；（槍或射擊者）連續射擊；（非正式）奪取，摘??；大力擊（球）；（報紙）聳人聽聞地報道，大肆宣揚（blaze的現在分詞）

9、braking ─── v.制動（brake的現在分詞）；剎車；制動系統；n.剎車

brazing 常見例句（雙語使用場景）

1、The control panel uses a HMI touch screen with m ulti-channel parameters set precisely, so the brazing time can be accurate to 0.1 seconds. ─── 控制面板采用人機界面觸摸屏，多通道參數精確設定，釬焊時間可精確到0.1秒。

2、This contribution focuses on the analysis of residual stress and thermal deformation of microminiaturized nickel base brazing stainless steel plate-fin structure after vacuum brazing. ─── 對微小尺寸的鎳基釬焊不銹鋼板翅結構在真空釬焊過程中產生的殘余應力分布與熱變形狀況進行研究分析。

3、Features of brazing and electron beam welding (EBW) are presented in this article. The main technical specifications required to develop the CB-101 medium-voltage EBW equipment and the ZHS-132 vacuum brazing furnace are given. ─── 分析了釬焊和電子束焊的特點,提出了研制CB-101型中壓電子束焊機和ZHS-132型真空釬焊設備的主要技術指標。

4、The treatments can do stainless-steel blacken(green),copper and aluminum alloy brazing,heat preservation material sulfuration and frothing,etc. ─── 不銹鋼發黑（綠）處理；銅、鋁合金的釬焊；保溫材料的流化發泡等。

5、If the brazing alloy refuses to enter the joint and tends to flow over the outside of either member of the joint, it indicates this member is overheated, or the other is underheated, or both. ─── 如果銅焊合金無法流進連接部位，并且傾向于流到所連接的兩個部件外面，這表明這個連接部件加熱過度，或者另一個加熱不足，或者兩個都是如此。

6、It is the core point to accomplish the brazing LY12 alloy well at middle-range temperature that the improved CsF-AIFs non-corrosive flux can remove easily the complicated oxide film on the surface of LY12 aluminum alloy. ─── 改進型CsF-AlF_3無腐蝕性釬劑能很好的去除LY12鋁合金表面氧化膜，是實現LY12鋁合金中溫釬焊連接的技術關鍵。

7、IPSEN products are used in a broad range of processes, including atmospheric and vacuum heat-treatment, plasma nitriding, brazing and sintering. ─── 所有的爐子---從用于單項處理工藝的單室爐，到用于大規模工業生產的聯合設備組成的生產線---都是在與客戶的密切合作中設計、制造、安裝和調試的。

8、The branch company mainly produces brazing with the word bit, tooth-like bit, various models of the bit. ─── 公司的分公司釬具公司主要生產一字釬頭，球齒類釬頭，各種型號的釬頭。

9、The multi-function vacuum welding equipment is a new exactitude welding machine,which can be used into vacuum diffusion bonding,vacuum brazing,vacuum hollow cathode arc welding and filled argon TIG. ─── 多功能真空焊機是集真空擴散焊、真空釬焊、真空空心陰極電弧焊及真空充氬TIG焊為一體的精密焊接設備。

10、The castchromized layer rnay be divlded into heat-agglomerating layer,brazing layer and fusion layer. ─── 提出了鉻鑄滲層是田合金燒結層、纖焊層和熔合層三個區域構成的。

11、palladium containing brazing alloy ─── 含鈀硬釬焊料

12、By the failure analysis of pick for touch soldering and brazing,pointing out the way of improving quality for pick brazing. ─── 總結了利用火焰釬焊截齒的失效經驗與教訓,分析了失效的原因,指出了提高截齒釬焊質量的技術途徑。

13、Different fluoride silver brazing fluxes have different brazing behaviors. ─── 含不同氟化物的銀釬劑釬焊性能各異。

14、Brazing is the main processing methods of heat transfer, and also is a determining factor of affecting the heat transfer effect. ─── 釬焊是換熱器的主要加工方法，也是影響換熱效果的決定因素之一。

15、Contact reaction brazing(CRB) for milimetre waveguide in inert atmosphere has been investigated. ─── 對毫米波器件在惰性氣體保護下的接觸反應釬焊進行了研究。

16、A new generation mono-layer brazing superabrasive tools and its encouragements are described.The advanced project is put forward to fabricate the renewal product ... ─── 提出了以釬焊代替燒結,借鑒多孔金屬材料生產工藝開發磨料與孔穴三維協同擇優排布制造多層燒結超硬磨料工具換代產品的新構想。

17、For the purpose of head welding on the steel with some low thermo metal, the automatic are brazing technology and arc automatic brazing equipment are designed. ─── 摘要針對企業對鋼件產品需堆焊一定厚度的低熔點合金的要求，提出了電弧釬焊的焊接工藝，開發了自動釬焊裝置。

18、Two of the more popular methods utilized today include brazing and laser welding. ─── 兩人今天比較流行的方法,包括利用激光和釬焊。

19、Experience with carbide brazing or grinding processes is preferred. ─── 具有碳焊接或碾磨制程經驗者優先。

20、Our customers use MT-Braze brazing powders in a variety of brazing, soldering, and thermal spray applications in the automotive, electrical and HVAC industries. ─── 客戶使用邁拓公司的產品，在汽車，電氣和暖通空調等行業，進行釬焊，熱噴涂等應用。

21、The traditional method that has long been used to attach segments to the steel core is brazing . ─── 傳統的方法是用已久的附加部分是鋼釬核心。

22、Attempting to braze a contaminated or improperly cleaned surface will result in an unsatisfactory joint. ─── 在被污染或未經正確清理的表面進行銅焊，其焊接效果將不會(huì )令人滿意。

23、During " 9. 5" Plan, this Paper introdaced the Plant developed technical brazing newtrails activity, recommended, exploit and popularized enery saving te chnology, and paid off guite well. ─── 文章介紹了山東鋁業公司電解鋁廠“九五”期間一方面通過開展技術創(chuàng )新活動,引進、開發和推廣節能“四新”技術,一方面走技術改造之路,節能降耗取得了顯著成效。

24、A method statement should be produced before any welding, brazing or soldering is allowed on the outside of equipment which contains or might contain a hazardous material or might be under pressure. ─── 在允許在其中含有或可能含有有害物質或可能帶壓的設備外部進行任何電焊、銅焊或軟焊接之前，應當編制相關施工方案。

25、The traditional method that has long been used to attach segments to the steel core is brazing. ─── 傳統的方法是用已久的附加部分是鋼釬核心。

26、processing technique for CVD diamond film mainly includes cutting, molding, grinding, polishing and brazing. ─── 金剛石膜加工技術主要包括切割、成型，研磨拋光和釬焊技術。

27、Be responsible for daily production of the APU ; manage the assembly， brazing， finishing lines.Brazed activity for heat ...... ... ─── 公司名稱：法雷奧發動機冷卻（佛山）有限公司工作地點：廣東省佛山市發布時間：2009-7-18

28、NOCOLOK AL-FLUX Potassium Fluoaluminate IN recent years, NOCOLOK method has been widely used in zhe brazing process of aluminium and its alloys. ─── 昆明市松海商貿有限公司是國內最專業的貿易有限公司。

29、EDS gives the existent elements and the content distributions of element in small area after brazing. ─── X射線能譜儀給出了釬焊后金剛石與釬料中存在的元素及各元素在微區的含量分布情況。

30、With excellent machinability,cold plasticity,hot plasticity,freecutting and resistance to corrosion ,it is easy to joint and braze. ─── 有良好的機械性能，熱態下可塑性好，冷態下塑性也可以，切削性好，易銜接合焊接，耐蝕，但易產生腐蝕破裂。

31、Low temperature brazing of aluminium plate was studied experimentally after copper brush plating, which is the key technique for the electric conduction and then the electromagnetic shielding shelter. ─── 摘要對于大板式電磁屏蔽方艙，有效解決各大板之間的電氣連接性是其制造過程中的關鍵技術。

32、The company produces the manual brazing machine, fully automatic grinding machine. ─── 主要生產經營：手動焊齒機、全自動磨齒機設備。

33、The Brazing of Big Area Circular Hard Alloy ─── 大面積環形硬質合金的釬焊

34、I thought that it would have been no more work than cutting and brazing the one in the first place, and the second was was the same. ─── 我認為，它將有更多的工作，沒有比切割和釬焊一個擺在首位，第二次是是一樣的。

35、Results show that the brittle fracture is mainly caused by hydrogen brittleness that results from the oxidation arid absorbing hydrogen of copper tube during braze welding. ─── 同時在加熱和冷卻時，由于異種材料的熱脹系數差別過大，產生的較大熱應力作用于已存在的裂紋，促使裂紋二次擴展，甚至使得晶粒脫落產生空洞，最終導致焊接接頭漏氣失效。

36、Unfortunately, the brazing performance of Si-Al series alloys was found to be very poor due to very high silicon content. ─── 然而，噴射成形硅鋁系合金中硅含量很高，其焊接性能較差。

37、Work experience as refrigeration technician, ideally skills in ship refrigeration. Experience in pipe laying and wiring. Oxygen brazing and TIG welding. Experience in working in a workshop. ─── 有作為制冷技術員工作經驗,有很好船舶制冷技巧。有管道鋪設,電線。氧焊,氬弧焊經驗。在工廠工作滿一年。

38、Silver brazing filler metals of different types are widely appliend for welding of ferrous and non-ferrous metals. ─── 各種牌號的銀基釬料，廣泛應用于黑色和有色金屬的焊接。

39、White powder,Mixed with Silver brazing,alloy Can braze Copper,copper alloy,steel and cast-iron,with strong removing oxide-capability. ─── 850白色粉末，除氧化物能力強，配合銀釬料，釬焊銅、銅合金、鋼、鑄鐵等材料。

40、Its comprehensive coverage focuses on printed circuits, integrated circuits, contact materials, semiconductors, wire, bonding, brazing, soldering, and welding. ─── 它的廣泛報導集中在印刷電路、集成電路、連接材料、半導體、導線、粘結、釬焊、焊錫和焊接。

41、The characteristics of the braze materials with different states were compared overall. ─── 對釬焊的特點及釬焊料應具備的性能進行了較為全面的論述。

42、A number of brazing alloys are available and a careful study should be made in every case to determine the proper alloy for the particular application. ─── 對于特定的應用，則應該對市面上提供的許多銅焊合金以及每個具體應用進行詳細的研究，以決定采用何種恰當的合金。

43、Diamond can be soaked by the metal that tends to form carbide when it is melted. Therefore the alloy that contain active element (forming strong carbide) and the single active element can be used as bond or brazing material of diamond tool. ─── 具強烈形成碳化物傾向性的金屬在熔化時能使金剛石潤濕,因而可采用含有活性元素(強碳化物形成元素)的合金或單活性元素金屬作為金剛石工具的粘結劑(或釬料)。

44、The high-strength airborne computer cabinet made from the 6061 spacial material should be welded integratively, to which the key problem is vacuum brazing. ─── 摘要6061（鍛鋁材料）高強度機載計算機機箱采用的是整體焊接工藝，其關鍵技術之一是高真空釬焊。

45、The hair pin and U-type brass pipe brazing. ─── 冷凍空調散熱盤管與U型管焊接制作。

46、The nitrogen base controlled atmosphere continuous brazing furnace is the new brazing equipment. ─── 文章介紹了現代用于冷軋不銹帶鋼生產的連續退火爐的組成及結構。

47、Starting from the influence of brazing clamp on brazing, what we should be especially considered in the brazing clamp design is analyzed by practical examples. ─── 從釬焊夾具對釬焊產生的重要影響入手,運用實例論述了釬焊夾具設計應重點考慮的因素。

48、SEBB experiments of thin tube-to-plate structure were carried out by applying the optimized processing parameters from finite element analysis, and a good brazing joint was acquired. ─── 利用有限元分析得到的優化工藝參數對毛細管板結構件進行了掃描電子束釬焊試驗，獲得了良好的釬焊接頭。

49、In order to develop new generation monolayer brazing CBN (cubic boron nitride) grinding wheels, two types of active filler alloys (Ni Cr and Ag Cu Ti) were tested in vacuum furnace. ─── 為研制我國新一代單層釬焊CBN(立方氮化硼 )磨料砂輪 ,嘗試Ni-Cr和Ag -Cu-Ti兩種活性釬料 ,在真空爐中釬焊。

50、Medium frequency transformer quenching is used for workpiece diathermy,quenching,annealing,brazing,etc. ─── 中頻淬火變壓器用于工件的透熱、淬火、退火、彎管釬焊等工藝。

51、Profiting from the entirely new AlfaFusion brazing technology, the AlfaNova has founded a new application for plate heat exchangers and won the advantage of traditional heat exchangers in the competition. ─── 得益于全新的AlfaFusion釬焊技術,全不銹鋼釬焊板式換熱器AlfaNova開創(chuàng )了板式換熱器應用的新領域,在和傳統換熱器的競爭中占據了優勢。

52、The furnace is applicable for high temperature degassing and vacuum brazing. ─── 并能廣泛適用于高溫脫氣、真空釬焊等場合。

53、The graphitizing welding rod Z258 have been used in both aspectsnoted above.And low-alloy system of Mo, Ni, Cu is used to gain austenite andbainite in the braze seam of the latter. ─── 上述兩種工作使用的焊條都是石墨型球墨鑄鐵焊條Z258，后者還另外添加了Mo、Ni、Cu合余系統來影響焊縫組織轉變。

54、High melting point,cheap price,can braze copper and steel without cadmium. ─── 770 810熔點較高，但無鎘，價格低廉，可焊銅、鋼等材料。

55、Reliability experiment was shown that braze welding quality could be known exactly by ultrasonic inspection when proper device, parameter and evaluation method were selected. ─── 可靠性驗證結果表明,選擇合適的儀器設備及檢測參數,采用正確的評定方法,超聲波所測結果能較準確的反映零件的釬焊質量。

56、MISSION - Be responsible for daily production of the APU ; manage the assembly, brazing, finishing lines. - Braz...... ... ─── 公司名稱：艾克塞迪斯信息技術咨詢（上海）有限公司工作地點：廣東省佛山市發布時間：2009-4-23

57、Copper phosphorus alloys. Useful for braze copper-copper or copper-brass, using flux. ─── 以銅和磷為主要成份，用于銅-銅或銅-銅合金的焊接，需要使用助焊劑。

58、Fins are attached to the plates by a mechanical fit, gluing, soldering, brazing, welding, or extrusion. ─── 翅片靠機械配合、粘結、軟焊、硬焊、焊接或擠壓附著在板上。

59、This paper introduces the filler metal, processes, strength and micro structure of brazed seam for Ru -base and FeNiCo alloy brazing. ─── 主要介紹了適用于釕基合金與鐵鎳鈷合金的釬料、釬焊工藝和焊縫強度,分析了焊縫微觀組織。

60、In view of the joining precision and the feature of CRB, the technology factors affecting brazing quality were analysed and effective measures were adopted. ─── 分析了影響釬焊質量的工藝因素及應采取的措施。

61、These radiators are made by brazing thin aluminum fins to flattened aluminum tubes. ─── 散熱器由薄鋁片通過銅焊焊在扁鋁管上。

62、"Attempting to braze a contaminated or improperly cleaned surface will result in an unsatisfactory joint. ─── 在已經弄臟或不正確清洗的表面上進行釬焊，焊接效果就很難令人滿意

63、In the paper,the technology and equipment of furnace brazing for AL alloy radiator are introduced.The property of brazed joint is analyzed. ─── 介紹了一種鋁散熱器的釬焊工藝和設備，并對釬焊接頭性能進行分析。

64、A solder paste used for brazing was developed and its technical performance was investigated. ─── 研制了鋁硬釬焊用釬料膏，對其工藝性能進行了研究。

65、The core of the EGR cooler can be made by vacuum brazing. ─── EGR冷卻器的芯子可以通過真空釬焊獲得。

66、Especially,the amorphous Ti-based braze materials which are widely used in astronautical and aeronautical fields were elaborated particularly. ─── 對不同狀態釬焊料的性能特點進行了全面的比較,特別是對在航天、航空領域廣泛應用的非晶鈦基釬焊料進行了重點介紹。

67、Describes the advantages of the jointly-designed three-chamber vacuum brazing furnace and the construction of vacuum mup and solders used for it. ─── 敘述了真空保溫杯的種類,保溫時間及使用壽命,聯合設計三室真空釬焊爐的優點以及真空杯的釬焊焊料、結構。

68、The quality problems of home made brazing filler metals as compared with ones used abroad are analyzed on the basis of testing and supervision results of filler metal last few years. ─── 從近幾年國內釬料質量檢測結果出發,分析了國產硬釬料產品質量方面存在的問題以及與國外同類產品相比所存在的差距。

69、The resistance brazing principle; the selection of brazing parameters and quality control measures are introduced for the lap joints of copper strip rotor coils within big electrical generator. ─── 介紹了大電機紫銅帶線圈斜搭接接頭電阻釬焊裝置工作原理、參數選擇以及釬焊質量的控制.

70、Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment. ─── 使用聯接器，夾子，螺釘，螺栓，水泥或焊接，釬焊和焊接設備連接管件。

71、Brazing of stainless steel under vacuum or protective atmosphere. ─── 不銹鋼真空或保護氣氛釬焊。

72、We recommend our customers to try out brazing, a metal joining technique that adds the benefits of rationalization to high quality, low cost and timely delivery. ─── 我們推薦您使用能使品質,成本和交貨期更加合理化的銅焊接技術。

73、RAJAT PRODUCTS offers you pertinent Information by telephone for the ranges Brazing, Flux and Wire in addition to Wire. Contact RAJAT PRODUCTS. ─── RAJAT PRODUCTS是一家高級企業，該企業使用多種工藝制造硬焊,焊藥、焊劑,金屬線,線材。

74、The method and technology of oxyacetylene flame braze welding for main cable wrapping at Shantou Bay Bridge were introduced,and the difficulties of the welding were analyzed. ─── 介紹汕頭海灣大橋主纜纏絲所采用的氧-乙炔火焰釬接焊方法及其工藝，并對主纜纏絲焊接的難點進行了分析。

75、Letting animals feed continely continually and intensively in the same brazing grazing area can require cosplay replantedcostly replanting.. ─── 持續集中地在同一個牧場放牧需要昂貴的重栽。

76、Providing strong joints for copper and alloyed copper, steel and copper pipes brazing. ─── 強度較高,用于銅和銅合金,各種鋼材零件,鋼與銅管的釬焊。

77、Rated internal pressure is that of the tube being joined. While solders can be used, brazing alloys are recommended. ─── H額定內部壓力是所連接的管道額定內部壓力。如果可以采用焊料，則推薦使用銅焊合金。

78、performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings. ─── 在高溫環境下，銅也表現很好，而且易于通過焊接或釬焊進行連接。銅專門用作配件材料。

79、This paper describes contact reaction diffusion brazing process of copper aDoy parts with joint local coats of brush forming interim liquid in furnace shielded with inert gas. ─── 介紹了在銅質零件上局部電刷鍍多元合金后,把零件放入惰性氣體保護爐內,連接處形成過渡液相的接觸反應擴散釬焊工藝。

80、THE PRESENT SITUATION AND ANALYSIS OF EXTRUSION TECHNOLOGY FOR BRAZING FILLER METALS IN THE WORLD. ─── 國外硬釬料擠壓技術的現狀與分析。

81、The hi-frequency induction brazing process of PCD tools was summarized in details,and the research status of the PCD tools brazing technology home and abroad was introduced in this paper . ─── 對PCD刀具高頻感應釬焊工藝和國內外PCD刀具釬焊技術的研究現狀進行了較為詳細的闡述,并對國內PCD刀具釬焊技術的發展進行了展望。

82、Brazing technology of aluminium and its alloys is one of the fields which gain more research and development quickly in recent years. ─── 指出鋁及鋁合金的釬焊問題是近年來研究較多、發展較快的研究領域之一,鋁及鋁合金釬焊技術應用前景廣闊。

83、Thermodynamical anal ysis on Al eutectic reaction brazing [J].The Chinese Journal of Nonferrous Me tals, 2001, 11(6): 1017-1020. ─── Al共晶接觸反應釬焊熱力學分析 [J]. 中國有色金屬學報, 2001, 11(6): 1017-1020.

84、Alloys with a high silver content, small melting range, excellent capillarity and fluidity.Used for brazing thin joints such as diaphragms, thermostats, electrical equipment, etc. ─── 含銀量高、熔點穩定，具有優異的滲透性和流動性，適于焊接薄膜、溫控、電器裝置等接觸面小的工件；

85、STUDY OF CHINESE ANCIENT BRAZING FLUX ─── 中國古焊藥研究

86、The microstructure and the element profiles of the interdiffused layer formed by electron beam self-material brazing of Nb-1Zr alloy to 1Cr18Ni9 stainless steel was examined by SEM, TEM and EDS. ─── 利用掃描電子顯微鏡 (SEM)、透射電子顯微鏡 (TEM)和電子衍射能譜儀 (EDS)分析了Nb 1Zr合金與 1Cr1 8Ni9不銹鋼在電子束自釬焊過程中形成的互擴散層的微觀組織形貌、析出相成分和結構。

87、The special processes include vacuum brazing, vacuum furnaces, plasma spray, rubber application, NDT, MPI, FPI, EDM etc. ─── 普惠公司是世界三大發動機生產公司之一占有世界民用發動機將近一半的市場份額。

88、To get the nicety and anti-grinding, our company import a list of VOLLMER equipments, GERLING brazing equipment and tungsten carbide which is from Luxembourg and Germany. ─── 引進德國威猛VOLLMER全套生產研磨設備和德國GERLING全自動焊接機，以及盧森堡和德國硬質合金，力求精度和耐磨性。

89、The theoretical rules among the high temperature performance of the brazing alloy, strain rate and the function of Co alterant are analyzed. ─── 分析了釬料高溫性能與應變速率、鈷的變質劑作用等因素之間的理論規律。