?camber

camber 發音

英：['k?mb?]　　美：['k?mb?]

英：　　美：

camber 中文意思翻譯

camber 網絡(luò )釋義

vt. 外傾角；使拱起；使彎作弧形n. 弧形；小船塢；曲弧度vi. 成弧形；使拱起n. (Camber)人名；(法)康貝；(瑞典)坎貝爾

camber 詞性/詞形變化，camber變形

動詞現在分詞: cambering |動詞過去式: cambered |動詞第三人稱單數: cambers |動詞過去分詞: cambered |

camber 短語詞組

1、camber brake ─── 外傾角制動器

2、camber blades ─── 彎曲葉片

3、camber abgle ─── [機] 弧面角

4、camber derivative ─── 外傾角導數

5、camber arch ─── 彎拱

6、camber block ─── 外傾角塊

7、camber bar ─── 坎伯酒吧

8、camber board ─── 外傾角板

9、camber energy ─── 外傾角能量

10、camber correction factor ─── 外傾角修正系數

11、camber beam ─── 弓背梁，上拱梁;彎梁

12、camber line ─── 傾斜線上彎線

13、camber height ─── 弧高

14、camber grinding ─── 曲線磨削

15、camber angle ─── [機] 中心線彎曲角

16、camber jack ─── 壓彎機

17、camber distribution ─── 外傾角分布

18、camber box ─── 外傾角箱

19、camber bowl ─── 外傾角杯

camber 相似詞語短語

1、clamber ─── vi.攀登，爬上；vt.爬，攀登；n.攀登，爬上

2、lamber ─── n.琥珀

3、chamber ─── n.（身體或器官內的）室，膛；房間；會(huì )所；adj.室內的；私人的，秘密的；vt.把…關在室內；裝填（彈藥等）；n.(Chamber)人名；(英)錢伯

4、cumber ─── vt.阻礙，妨害；使受苦；n.拖累，累贅；妨害；n.(Cumber)人名；(英)坎伯

5、cambers ─── n.拱曲度（路面中間微拱的曲面）；拱形；汽車前輪外傾；（翼面的）曲面，??；v.成弧形；使拱起；n.(Camber)（美、英、克）坎貝爾（人名）

6、comber ─── n.梳刷者；梳棉機；（美）碎浪；n.(Comber)人名；(英)庫默

7、jamber ─── 阻塞，阻塞

8、amber ─── n.琥珀；琥珀色；黃褐色；黃燈；adj.琥珀制的；琥珀色的；黃色的

9、cambered ─── adj.曲面的；拱形的；弧形的；v.成弓形；反撓（camber的過去分詞）

camber 常見例句（雙語使用場景）

1、Designed principle of the rotational stand uses for measuring a camber with double focuses ─── 一種雙焦點曲面的測量用轉動架的設計原理

2、Establishment of Expert Knowledge of Armhole Curve's Camber of Shaped Sub-basic Pattern ─── 變形亞基本紙樣袖窿弧線內凹量專家知識的建立

3、The term "camber and valley bulging" has been used loosely in Britain to describesuperficial valley disturbances in a broad sense. ─── 從廣義上講，“弓形坡和河谷外鼓”這個專用詞在不列顛廣泛用于描述淺表河谷擾動。

4、Keywords Fourier transform profilometry;Large camber;3-D measurement;Datum modification; ─── 傅里葉變換輪廓法;大型曲面;三維測量;數據修正;

5、the vehicles Caster or Camber by heating, bending or by performing any other modification to the vehicle's front suspension components. ─── 勿借加熱、彎折、或以其他方法修改前懸吊系統組件，來調整車輛之后傾角或外傾角。

6、The mathematical principle of the generation of cone roller's centerless super roller guide spiral camber ─── 圓錐滾子無心超精導輥螺旋曲面生成的數學原理

7、You can specify wing attributes including camber and centerline sheeting of an airfoil. ─── 你能夠標示翅膀歸結于包括中凸形和機翼的中心線護墻板。

8、"To Camber Company, please. It 's on 32nd avenue. " ─── 去坎培克斯公司。在第32街上。

9、In the New Blocks, the bust dart is tailed on the camber of the armhole, which makes bust line and waist line become level, fabric gentle and block smooth, the whole structure exhibits box type. ─── 在新原型中，胸省設在袖窿弧線上，使得胸圍線、腰圍線變成水平，面料絲縷順直，造型順暢，整體結構構成箱型特征。

10、The equation of camber is often used when the bend of girder is being studied. ─── 在對梁的彎曲進行研究時,經常要用到彎矩方程。

11、Keywords basic element plate saddle shaped camber forming graduately; ─── 基本體;板材;馬鞍形曲面;逐次成形;

12、The electromobile goes into curve district when passing poiont B,and runs,along the camber line to point C. ─── 在此期間檢測到鋪設在白紙下的薄鐵片，并同時發出聲光指示信息，實時存儲、顯示在“直道區”檢測到的薄鐵片數目。

13、camber stiffness coefficient ─── 外傾剛度系數

14、Keywords shaped sub-basic pattern;armhole curve;camber;expert knowledge; ─── 變形亞基本型;袖窿弧線;內凹量;專家知識;

15、For the cost comparison, specify costs for steel, shear studs and beam camber. ─── 在價格的比較時，鋼材、抗剪螺栓和梁拱的價格可以設定。

16、The term "camber and valley bulging" has been used loosely in Britain to describe superficial valley disturbances in a broad sense. ─── 從廣義上講，“弓形坡和河谷外鼓”這個專用詞在不列顛廣泛用于描述淺表河谷擾動。

17、The thickness ratio appeared to have little effect on lift coefficient at zero angle of attack, since the angle of zero lift was largely determined by the airfoil camber. ─── 在迎角為零時，由于零升力主要由機翼中弧線決定，相對厚度對升力幾乎沒有影響。

18、This paper use the software FLUENT to simulate numerically effects of the big camber and stall delay on the wind turbine performances. ─── 本文通過FLUENT軟件分別對原型葉片、大彎度葉片和失速延遲葉片進行三維數值模擬計算。

19、The application of symmetry to the calculation of curvilinear integral and camber integral ─── 對稱性在曲線積分及曲面積分計算中的應用

20、1． Camber line becomes orthogonal arc tooth wimble gear. ─── 1． 中心線成直角的弧齒錐齒輪。

21、Kowloon North Camber Typhoon Shelter ─── 九龍北南塘避風塘

22、Experimental results show that the corrected image meets the need of precision of the tube camber measurement system.And the method can easily be applied. ─── 實驗結果表明，該方法的校正精度較高，適用于管道彎曲度高精度的測量，而且易于實現。

23、Analyzing projection about Intersecting Line of Second Camber Having Common Symmetrical Surface ─── 關于具有公共對稱平面的二次回轉曲面交線的投影分析

24、variable camber inlet guide vane ─── 可變彎度的進口導向葉片

25、The joint of all the camber will be the camber curve. ─── 各截面凸度連線便是凸度曲線。

26、Numerical Simulation Analysis on A New Bulletproof Board with Camber Surface ─── 異形表面遮彈層抗侵徹性能的有限元模擬分析

27、variable camber adaptive wing ─── 變彎度自適應機翼

28、Study on Primary Forming Technique of NBR Sponge Thin Camber ─── NBR薄型曲面海綿成型技術的研究

29、The recirculation rate from Camber and Acclivity covers 92 percent while Acclivity (8~12 h) with lower rate of 71.4 percent. ─── “下弧型”、“上斜型”抬高早期溶栓再通率高,兩型占92.0%; “上弧型”再通率低(8-12 h),占71.4%。

30、Taiwan's central lid camber like foreign-style multi-storied building construction, this is the Fort Anping which the posterity knew very well. ─── 臺的中央蓋起拱劵式的洋樓建筑，這便是后人熟知的安平古堡。

31、These angles include camber, caster, steering axis inclination, toe in (toe out), and toe out on turn (turning radius). ─── 這些角度包括曲面，連鑄機，轉向軸傾角，在趾（趾列），并趾列于之交（轉彎半徑）。

32、camber surfaced indexing cam ─── 弧面分度凸輪

33、How to reduce bigger arch camber of inherent stress box-beam ─── 如何減少預應力箱梁起拱偏大問題

34、The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19 ft. 8 in. ─── 上部結構的建筑高度為3英尺6英寸,有19英尺8英寸顯著的上拱度。

35、Analysis of Influence of Work Roll Profile on Side Camber of Plate ─── 工作輥輥形對中厚板側彎的影響分析

36、Everyone in Camber knew his father, and the boy did not like to stay in the town. ─── 坎伯城誰都認識他父親，所以亨利不想再呆在城里了。

37、The construction and working principle of roller camber grinding were introduced.The cause of roller camber defects and the prevention measures were analysed. ─── 介紹了軋輥凸度磨削機構的構成,工作原理及凸度的實現過程,分析了凸度缺陷產生的原理及防止措施。

38、Their roads were also slightly curved in a crown or camber so that the water would run off. ─── 他們設計的公路還有輕微的路拱或彎拱曲線，便于路面排水。

39、The method also permits inverse design with flaps, specification of geometric constraints (thickness, camber, etc.). ─── 辦法還允許逆向設計皮瓣、幾何約束規格(厚度、拱等).

40、The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19ft. 8 in. ─── 上部結構的建筑高度為3英尺6英寸，有19英尺8英寸顯著的上拱度。

41、In the design, slide camber and pin were used for side-face and side-hole forming, and a secondary pusher was used in lifter to avoid deformation in taking off a thin-walled castings. ─── 在壓鑄模的結構中采用斜滑塊機構成型側型和側孔;

42、For straight-winged tailless airplanes, only the negative camber satisfies the conditions for flight. ─── 對直機翼無尾飛機，只有負彎度才滿足飛行條件。

43、The two inner mounting positions of each camber link offer an easy way to adjust camber rise. ─── 兩個內安裝的立場，每一個曲面的聯系提供一種簡單的方法來調整曲面上升。

44、Camber line becomes orthogonal arc tooth wimble gear. ─── 中心線成直角的弧齒錐齒輪。

45、Measurement of Camber of Post-tensioned Prestressed Simple Support Beam ─── 后張法預應力簡支梁上拱度實測報告

46、Starting with airfoil 2, the pitching moment is increased from -.15 to -.25 to provide more aft loading and aft camber. ─── 從翼型2俯仰時刻由原來的15年至今25年至今,以提供更多后部后部拱落.

47、It has two sides, one is a circle, the other is a camber. ─── 圓錐有兩個面,一個面是圓形,另一個面是曲面。

48、Application of STL File in Camber Splice ─── STL文件在可視化曲面拼接中的應用

49、Why does different facial form suit to plant camber? ─── 不同的臉形適合何種眉形？

50、When he was a boy at Camber, his father got into trouble with the police. ─── 他孩提時住在坎伯，他的父親和警察惹上了麻煩。

51、The front subframe is modified for extra camber and castor. ─── 前副車架被修改為額外拱形和蓖麻。

52、Measures for remedying the camber of main girders on two cranes for metallurgic plant ─── 恢復冶金起重機主梁拱度的技改方案

53、Collocation must be brushed with bevel angle when using, can use the vertex damage on filling camber, or pure with will enhance eyebrow quality. ─── 使用時必須與斜角刷搭配，可用來補眉形上的缺角，或單純用來加強眉色。

54、Deck plating outside accommodation should have camber. ─── 住所甲板外面應該有梁拱。

55、Like most techniques with mountain biking, turning has many variables, is the turn bend flat or off camber. ─── 如同其它登山車的騎乘技巧一般，過彎也有很多變數，好比這個彎是個平順的彎或帶有起伏的彎。

56、kurtosis, arch, vault, doming,camber ─── 拱頂。拱形結構。穹形。

57、measuring the camber deformation of a dragonfly wing using projected comb fringe without hypothesizing that the wing is a rigid plate. ─── 梳狀條紋投影法，解決翅膀弓形變形測量問題，不需要以往的翅膀剛性平板或剛性條桿假設；

58、The camber is the curvature of the cross section and the crown is the highest point of the camber. A vertical curve, clothoidic or parabolic, occurs at a change of gradient. ─── 圖中向上傾斜部分是路拱,該部分的最高點是路脊。坡度變化時,出現了一個回旋曲線式的或者拋物線式的垂直曲線。

59、If "Guo Liang" using decorative materials will be packaged into a curve it, camber warrants, you can make ceiling in the creative arts have become lithe up. ─── 如果將“過梁”用裝飾材料將它包裝成曲線、曲面狀，就可使天花板在你的藝術創(chuàng )意中變得輕盈起來。

60、Camber design of pinch pass mill and its practice ─── 冷軋平整機輥型設計與實踐

61、ATOS Survey System's Applying for Fast Digital Surveying and Processing of Unprocessed Camber Surface ─── 基于A(yíng)TOS測量系統原型曲面快速數字測量及處理

62、Camber line won"ts do orthogonal arc tooth wimble gear. ─── 中心線不成直角的弧齒錐齒輪。

63、The inner camber link ball studs are vertical at both ends, allowing fine roll center adjustments. ─── 黨內拱連接球釘的垂直兩邊，讓罰款軋輥中心的調整。

64、Do not attempt to adjust the vehicles Caster or Camber by heating, bending or by performing any other modification to the vehicle's front suspension components. ─── 勿借加熱、彎折、或以其他方法修改前懸吊系統組件，來調整車輛之后傾角或外傾角。

65、In the terminology of tyre models I think you could describe it as a "brush model including the effect of camber" . ─── 在我想你可以形容為一個“刷模型包括拱效應”是輪胎模型術語。

66、LOWER ECCENTRIC CAMBER ADJUSTMENT BOLT ─── 下偏心外傾角調整螺栓

67、Keywords ATOS system;fast survey;unprocessed camber;digital spot cloud;data processing; ─── ATOS系統;快速測量;原型曲面;數字點云;數據處理;

68、Dynamic Model of a Moving Flexible Camber Beam ─── 大范圍運動柔性曲線梁動力學建模方法研究

69、In order to guarantee the stationarity and safety of trains running in high-speed railway, strict limitation on long-term camber of bridges is needed. ─── 為保證列車行駛的平穩性和安全性，高速鐵路橋梁的徐變上拱度有十分嚴格的限值。

70、The weaving technology of monolayer camber weaving ─── 單層曲面機織布的織造技術研究

71、A Study on Contact Patch of Tire with Camber and Sideslip ─── 外傾和側偏聯合作用下輪胎接地印跡研究

72、Second, the camber equation is developed for the crss points. ─── 從曲面方程和直線方程的聯立解求出交點。

73、Foredeck plates pulled down against camber of deck beams. ─── 前甲板板推倒對曲面的甲板梁。

74、But during the practical application, the surface camber of the figure is different. ─── 但是在實際應用中，圖形的表面曲率是不一樣的。

75、DEVELOPMENT ON HOLLOW MOULD OF DOUBLE CAMBER BENDING-TEMPERED GLASS ─── 雙曲面彎鋼化玻璃空心模具的研制

76、Formation of Fractionized Camber Based on Quadrangle Grid ─── 基于四邊形網格細分曲面的生成

77、The camber is the curvature of the cross section and the crown is the highest point of the camber. ─── 圖中向上傾斜部分是路拱,該部分的最高點是路脊。

78、Effects of blade curved on compressor cascades with different camber angles under different incidences ─── 葉片彎曲對不同折轉角擴壓葉柵沖角特性影響

79、Pressure Distribution Algorithm of Roll Camber Design for Medium and Heavy Plate ─── 中厚板輥型設計中壓力沿輥身分布算法

80、The perfect camber design can be obtained by introducing the center/side ratio concept of contact pressure and choosing proper ratio. ─── 同時引入輥間接觸壓力的中、邊部比值概念并作合理選擇，使設計出的輥型更加完善。

81、Dynamic model of a moving flexible camber beam by the method of fitted modal ─── 基于擬合模態法的大范圍運動柔性曲線梁動力學建模方法研究

82、Suggestion to Post-tensioned Bounded Pre-stressing Construction in Small-radius Camber Arch Bridges ─── 小半徑彎梁橋中后張有粘結預應力施工問題芻議

83、Calculation of Deflection and Camber for the Column Jib Crane Based on ANSYS ─── 基于A(yíng)NSYS的定柱式旋臂起重機的撓度與翹度設計

84、First PLC system completes AGC operation and feedback control;secondary computer completes model calculation and setup of camber control.The whole system reaches the highest level of the world. ─── 一級PLC系統完AGC的執行與反饋控制,二級計算機完成凸度控制的模型計算和設定,整個控制系統達到了當今世界最高水平。

85、The contact pressure distribution and the shape of contact area in vertical state and camber state of tire are measured by pressure sensitive films, respectively. ─── 實時記錄了試驗中輪胎受力與變形關系,并采用壓力敏感膜測量了輪胎在垂直狀態及側傾狀態接地區域內的壓力分布狀況。

86、geometric free camber of spring ─── 彈簧幾何撓度

87、The paper introduces the control of camber in the construction of non prestressed continuous box beam, appearance and development of cracks of bottom plate of box beam. ─── 介紹非預應力連續箱梁施工中預拱度的控制,以及箱梁底板裂縫的出現和開展,并分析其成因,從而確保箱梁施工質量滿足設計和施工規范要求。

88、2． Camber line won"ts do orthogonal arc tooth wimble gear. ─── 2． 中心線不成直角的弧齒錐齒輪。