?deformation

deformation 發音

英：[?di?f??r?me??n]　　美：[?di?f???me??n]

英：　　美：

deformation 中文意思翻譯

deformation 短語詞組

1、bond-angle deformation ─── [化] 鍵角變形

2、forced high-elastic deformation ─── [化] 強迫高彈形變

3、deformation matrix ─── [計] 變形矩陣

4、high elastic deformation ─── [化] 高彈形變

5、critical deformation energe ─── [電] 臨界變形態

6、creep deformation ─── [化] 蠕變

7、fatigue deformation ─── [機] 疲勞變形

8、compression deformation ─── [化] 壓縮變形

9、elastic deformation ─── [化] 彈性形變

10、delayed elastic deformation ─── [化] 推遲彈性形變

11、deformation set ─── [化] 永久形變; 變定

12、deformation at constant volume ─── [化] 畸變

13、deformation probability ─── [計] 畸變概率

14、compatibility of deformation ─── [化] 變形協調

15、deformation work ─── [化] 變形功

16、deformation theory of plasticity ─── [化] 塑性形變理論

17、delayed deformation ─── [化] 延遲形變

18、fluid elastic deformation ─── [化] 流體彈性形變

19、critical deformation ─── [電] 臨界變形

deformation 詞性/詞形變化，deformation變形

復數--deformations。

deformation 常用詞組

plastic deformation ─── [化]塑性變形，塑性應變

elastic deformation ─── 彈性形變

thermal deformation ─── 熱變形；熱形變

deformation 相似詞語短語

1、preformation ─── n.預先形成；進化論的預成論

2、re-formation ─── n.革新；改善

3、I formation ─── 一、隊形

4、reformations ─── n.革新；改善

5、Reformation ─── n.革新；改善

6、neoformation ─── n.贅生物；[醫]新生物

7、deformational ─── 變形性

8、deformations ─── [力]變形

9、deforciation ─── 驅蟲

deformation 常見例句（雙語使用場景）

1、ASB is the damage reason in the condition of deformation at high speed rate. ─── 可以說，絕熱剪切帶是材料高速率變形條件下?lián)p傷的原因。

2、Shoes that are too tight deform the feet. ─── 太緊的鞋使腳變形。

3、And you will see after a while that you get permanent deformation, then it no longer comes back to its original length. ─── 你會(huì )看到不久后，它會(huì )發生永久變形，它不會(huì )再回到，原長。

4、The study on the mechanical deformation mechanism of the ice and the ice/structure interactions is an important topic. ─── 冰的力學變形機理以及它與結構相互作用力問題的研究是力學領域內研究的重要課題。

5、Pac-Frankenstein version of Pac-hand tour of the deformation! ─── 吃豆怪人版，吃豆的變形手游！

6、The same LM algorithm is used to track the affine deformation parameters of the target. ─── 使用LM優化方法跟蹤目標的仿射運動參數。

7、Plastic deformation concentrates at the ferrite area under the tensile stresses. ─── 在拉應力作用下,塑性變形集中在鐵素體區.

8、It is seen that the deformation parameters agree rather well with each other. ─── 人們看到形變參量彼此符合得相當好。

9、It is assumed that the plastic deformation is incompressible. ─── 它假定塑形變形是不可壓縮的。

10、They are not second-order approximations, but are exact for any amount of deformation. ─── 它們不是二次近似，而是對任何變形量都成立的精確表達式。

11、Not deformation, impact resistance and other properties. ─── 具有不變形、耐沖擊等特性。

12、The deformation frequencies are not sufficiently distinctive. ─── 其變形頻率不是十分明顯的。

13、Matrix should be of martensite, because it can resist impact and has little deformation. ─── 基體應是馬氏體，它能抵抗沖擊，變形小。

14、If a refraction or a reflecting body is irregular, the wave front undergoes a deformation. ─── 如果折射體或反射體是不規則的,波前即產生變形。

15、For stainless steel, high speed steel, vanadium steel, high hardness, toughness and deformation, easy to burn the workpiece grinding. ─── 適用于不銹鋼，高釩鋼速鋼等硬度高，韌性大及易變形，易燒傷工件的磨削加工。

16、If a refraction or a reflecting body is irreqular, the wave front undergoes a deformation. ─── 如果折射體或反射體是不規則的，波前即產生變形。

17、Deformation sequence of UHP rocks from the Dabie Mountains, China. Chinese Sciences Bulletin, 1995. ─── 大別山與合肥盆地的構造耦合,科學通報,1997。

18、Deformation is more likely to occur the thicker the ice is, because of the gravity of the weight of the ice. ─── 越厚的冰越容易發生變形，是由冰的重量產生的重力造成的。

19、What factors are involved in the amount of deformation a glacier undergoes? ─── 冰川的變形量涉及哪些因素？

20、The other 31, kitchen cabinet counter any body deformation? ─── 其他31、廚柜柜身有無變形?

21、Same reason can make bow-backed deformation accentuates gradually. ─── 同樣原因可使駝背畸形逐漸加重。

22、Plastic deformation is the ability of bend or deform before breaking. ─── 塑性變形就是在斷裂前彎曲或變形的能力。

23、And the surface deformation is continual and slow with a long duration of movement due to deep mining of iron ore in soft rock strata. ─── 軟巖地層深部鐵礦開采引起的地表移動變形發展緩慢且周期較長。

24、Only for values between 0. 6 and 1. 0 is the mode of deformation in doubt. ─── 只有該值取0.6到1之間,變形的模式才是未確定的。

25、At last, the solution of the formula for different deformation amplitude is explored. ─── 與現有方法相比，該方法能夠更加準確地描述金屬橡膠的非線性遲滯特性。

26、There is no material but will deform more or less under the action of force. ─── 在力的作用下，沒有一種材料不或多或少地變形。

27、Large deformation only occurs in the case of very high rotation speed. ─── 只有在轉速極高時，彈道簧才會(huì )產生局部嚴重變形。

28、The deformation D4 resulted from Caledonian movement. ─── D_4期變形為后期加里東運動的產物。

29、Plastic deformation as the result of dislocation motion; also, the shear displacement of two adjacent planes of atoms. ─── 位錯移動導致的塑性變形或兩個相鄰原子面的剪切位移。

30、Yielding strength is indicative of the stress at which plastic deformation begins. ─── 屈服強度是指塑性形變開始發生時的應力。

31、Severe variations deform the discharge curves. ─── 嚴重者使放電曲線發生畸變。

32、Capable of undergoing continuous deformation without rupture or relaxation. ─── 塑性的能夠歷經持續變形而不斷裂或松弛的

33、Rockmass corrosion is the base deformation and failure of the subgrade slope. ─── 巖體腐蝕是路基邊坡變形破壞的前提與基礎。

34、Cracking Analysis of High Arch Dam Heel Based on Deformation Reinforcement. ─── 基于變形加固理論的高拱壩壩踵開裂評價。

35、Setout ellipse curve with the traditional method of four-center will bring up offset of point and deformation of chart. ─── 四心圓法測設橢圓曲線會(huì )造成點位偏移,圖形變形。

36、Natural clays have their structure which must be destroyed during the deformation process. ─── 天然粘土一般都具有結構性，其變形過程必然伴隨著結構的破壞。

37、In the function of injection pressure, the mould which has core will produce a little core offset and cause plastics deformation. ─── 具有型芯的模具，在注射壓力的作用下，將使型芯產生一定偏移，引起塑件變形。

38、Service life is long, not changeful deformation is lubricious. ─── 使用壽命長，不易變形變色。

39、The hot deformation activation energy of KFC copper alloy during hot deformation is 288.79 kJ/mol. ─── 其熱變形激活能Q為288.79kJ/mol;

40、ECAP is an effective method realizing pure shear deformation. ─── ECAP是實現材料純剪切變形的有效方法。

41、Outside the strip zone, deformation is elastic. ─── 在窄帶區以外，變形是彈性的。

42、A steady increase of load on a part will cause it to deform gradually. ─── 均勻增加零件的負荷會(huì )使零件逐漸變形。

43、To mar or spoil the appearance or shape of;deform. ─── 臺灣島的形狀是一個拉長的橢圓形。

44、In flattening test,the crack happened in the lagest deformation parts. ─── 壓扁試驗中試樣的最大變形部位出現裂紋狀缺陷。

45、Rubberand version there are easy to deformation and cracking defect as a result, not suitable for making a fine product. ─── 橡皮版還活命便當變形和龜裂的弊病，因此，不不宜制卡粗忽的產物。

46、Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts. ─── 地磚膠粘劑。有粘結力的膠粘劑和灌漿的橫向變形的測定。

47、She appeared to deformation of the face. ─── 她出現了能變形的面孔。

48、A spiral deformation occured in the lower part of the young leaf enclosed in the sheath. ─── 在葉鞘裹住的幼葉下部呈現螺旋狀。

49、In measuring the pipeline curvature, the FBG sensor may be twisted due to sustaining bending deformation. ─── 在測量地下管線的離散點曲率時，光纖光柵傳感器除了承受彎曲變形外，還會(huì )發生扭轉的情況。

50、In every heart period, the max deformation scope of the aorta lies descending thoracic aortic isthmus. ─── 在每個心動周期,主動脈變形幅度最大處位于降主動脈峽部。

51、We shall present certain introductory notions that pertain to finite deformation in this chapter. ─── 在這一章里，這們將初步地介紹一些關于有限變形的概念。

52、Applied stress causes plastic deformation. ─── 外加應力引起塑性形變。

53、STUDY ON DEFORMATION PROCESS OF COLD TUBE ROLLINGWITH DOUBLE-SET THREE-ROLLER MILL? ─── 雙排多輥式鋼管冷軋變形過程研究?

54、The weakened superficial layers of cartilage develop fi ures in re o e to increased deformation by normal loads. ─── 變弱的表層軟骨因對正常負荷增加變形而發生裂隙。

55、There is no material but will deform more or less under the action of forces . ─── 在力的作用下，各種材料多少要產生形變。

56、Her own 12-year-old son, David, had already undergone three surgeries for a heart deformation. ─── 她自己的12歲的兒子戴維曾經做了三次心臟變形手術。

57、To undergo plastic deformation without cracking or breaking. Used of rocks, metals, or minerals. ─── 變形不經壓碎或打破而產生的人為損壞或變形。用于巖石、金屬或礦物質

58、In general, the deformation of the model grille is a combination of axial and shear strains. ─── 一般情況下，模型柵格的變形是軸向應變和切向應變的組合。

59、It will deform into an elongated blob. ─── 它會(huì )變形而成為一個拉長了的滴狀體。

60、The initial stress or deformation fields are not usually homogeneous . ─── 初始脅強場或初始形變場通常并不是均勻的。

61、The first reason is the loose rock? soil constitution and deformation of fossil landslide. ─── 分析表明,古滑體復活的首要原因是古滑體的變形破壞及其疏松物質組成為滑體復活創(chuàng )造了基礎。

62、Development deformation is enamel commonly depauperate, spot glair tooth and too small tooth. ─── 發育畸形常見的為釉質發育不全，斑釉牙及過小牙等。

63、It is found that the nuclear deformation effect can change the shape of PES significantly. ─── 原子核的形變效應對于勢能面的形狀有較大的影響。

64、There is no materials but will deform more or less under the action of forces. ─── 一切材料在力的作用下多少會(huì )變形。

65、In severe cases, it can deform joints and cripple its victims. ─── 嚴重的病例，可使關節變形，使病人殘廢。

66、As the deformation of steels increases from 23% to 76% the processes of recovery and recrystallization are accelerated. ─── 在其它條件給定時,經76%面縮率拉拔后的鋼與23%面縮率拉拔后的鋼相比,前者的回復及再結晶過程加快;

67、How do engineering materials deform when bearing mechanical loads? ─── 如何做工程材料變形時，軸承機械載荷?

68、Increased loading, pipes easy to corrode, leakage and pipe rupture easily increase, easy to expanse and easily cause ground deformation. ─── 增加承重，排管易腐蝕，易增加漏水和管材破裂現象，易膨脹造成地面變形。

69、To subject to mechanical force or pressure to the point of deformation. ─── 使受壓力過度因承受機械力或壓強而達到了變形的程度

70、USB plug slant : Reject if USB plug inset or pull cause slant or deformation. ─── 5 USB端頭歪斜:因插拔不當造成板端公頭歪斜變形者不允收.

71、Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation. ─── 低滲透氣藏孔隙變形具有彈塑性變形的特征。

72、Geometry processing, deformation etc. in advance of rendering on RSX. ─── 幾何運算、變形等等這些部分則會(huì )利用到RSX的渲染優勢。

73、The shale beds in between generally deform plastically. ─── 夾在其中的頁巖層通常是塑性變形。

74、The deformation strength is declining eastward and seaward. ─── 變形強度總體趨勢由西而東，由陸向海減弱。

75、Plastic deformation and creep are highly undesirable, resilience is favourable. ─── 塑性形變和蠕變是很不利的，回彈性則是有利的。

76、Rock fracture and rock flowage are different types of geological deformation. ─── 巖石破裂和巖石流動是不同類型的地質變形。

77、Of specific interest are deformation (strain) which occurs when a stress is applied, hardness and toughness. ─── 具體說就是施加一個應力時而產生的變(應變),硬度,韌性。

78、The next type of movement we will talk about is called: deformation. ─── 我們要討論的下一種運動叫做變形。

79、Considering the elastic deformation of the barrel,the AA gun is simplified into a multi-rigid body dynamic model. ─── 同時考慮身管彈性變形,建立了火炮發射時的多剛體動力學模型。

80、Not only deformation was controlled, but also cost and engineering time were reduced. ─── 作為大面積、深開挖的基坑工程既控制基坑變形又達到降低工程造價、縮短工期的目的。

81、It provides a scientific evidence for study on the plastic deformation of ledeburite steel and iron materials. ─── 為萊氏體鋼鐵材料塑性變形的研究提供了科學的證據。

82、The result can be employed in motor case assessment and reliability design based on plastic deformation. ─── 其結果可供基于塑性形變的殼體評估及可靠性設計參考。

83、Ice crystals begin to deform measurably. ─── 冰晶就產生某種程度的變形了。

84、What can see more deformation is mitotic. ─── 可以見到較多畸形的有絲分裂。

85、Do not bend or deform the probes as this could cause irreparable damage. ─── 不能彎曲或毀壞探頭的表面，因為這將導致不可修復的損壞。

86、To each increment of load they respond with a definite change of stress and deformation. ─── 對荷載的每個增量，應力的變形都有確定的變化。

87、With toe (HSI) A slow growth, thickening deformation, dry skin thinning, Ganmao exfoliated and muscular atrophy. ─── 伴趾(指)甲生長緩慢，增厚變形，皮膚干燥變薄，汗毛脫落和肌肉萎縮。

88、Laminated adhesive to prolong the useful life, tear proof, attrition proof, deformation proof. ─── 可通過覆蓋加強塑料膜等方式延長使用壽命,防止撕裂、摩擦、變形等。

89、Deformation: The object has changements of shape and dimension under some influences of outside conditions. ─── 變形:物體在某些外界條件下的影響下,發生形狀和尺寸的變化。