?bevelled

bevelled發音

[?bevld]

英：　　美：

bevelled中文意思翻譯

v.使成斜邊或斜角

n.斜角, 斜角規

bevelled詞形變化

動詞現在分詞: beveling/bevelling | 動詞過去分詞: beveled/bevelled | 動詞過去式: beveled/bevelled | 動詞第三人稱單數: bevels/bevels |

bevelled常見例句

1 、Bevel gears enclosed in grease-packed cases.that promise the machine run noiseless and have longer life.───密封油脂盒內的斜齒輪轉動無聲，延長了機器壽命。

2 、These applications, as in most machine elements, have developed into many standard forms, such as spur, bevel, helical, and worm gears.───大多數機器元件的這些應用已經發展成許多標準形式,例如柱齒、傳動齒輪、螺旋齒輪及渦輪齒輪。

3 、SG : Super glide. A series of chain rings with bevelled and cutaway teeth designed to improve shifting.───意為“非常順滑”。設計成斜角的鏈條扣和圓角牙盤，用來改善變速。

4 、This paper describes the joining problem of mechanized paving in bituminous concrete and expounds the construction technology of the covered bevel joining methed.───提出了機械鋪筑瀝青混凝土中的接縫問題,論述了壓茬接縫法施工工藝。

5 、DO NOT bevel the blown edge of the embouchure hole - leave it clean and sharp.───不要將送聲孔的邊緣切成斜面，并保持其清潔與靈敏性。

6 、Through proposing Maclaurin formula for simplifying the traditional spiral bevel and hypoid gears calculating method, the computation speed is elevated.───提出了用麥克勞林公式簡化傳統的準雙曲面齒輪曲面成形計算方法,提高了運算的實時性。

7 、Aiming at the complex boundary in the numerical calculation of flood diversion area, a bevel angle Cartesian method is adopted based on the traditional Cartesian method.───摘要針對分蓄洪區水流數值計算中的復雜邊界問題，在傳統笛卡爾坐標方法的基礎上改用斜角笛卡爾方法。

8 、All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.───所有閥門都可以配置手輪、鏈輪和錐齒輪手輪和鏈輪。

9 、A bullet would cause cavitation and beveling, which aren't present.─── 子彈會(huì )引起空洞和坡口 這都沒有

10 、Abstract: The state of art of bevel gear measuring technology and features of different measuring methods are analysed, and the conception of local interchangeability of bevel gears is proposed.───文摘:分析了錐齒輪測量技術的發展現狀及各種測量方法的特點，并提出了錐齒輪局部互換性的概念。

11 、TYPE : Reverse Acting with bevel Gear, Direct Acting, Direct Acting with Handwheel, Double Acting, Tandem Piston, Reverse Acting, Reverse Acting with Handwheel.───反向作用傾斜齒輪，直接作用，直接作用手輪，雙作用，串聯活塞，反向作用手輪

12 、Handwheel, bevel gear, pneumatic cylinder and spring-return operators are available. In addition, a wide variety of accessories and options are also available.───可提供手輪，錐齒輪，氣動缸體和彈簧恢復執行器。另外，還可提供種類更加豐富的附件供選擇。

13 、There's no shower curtain. It's all beveled glass.─── 沒浴簾 都是多邊切割玻璃

14 、Auto differential straight bevel gears, transmission monoblock gears and synchronizer gear rings, auto transmission middle shaft gears, CVJ inner races and so on.───產品簡介：汽車差速器直齒錐齒輪、變速器結合齒輪及同步器接合齒環、汽車變速器中間軸齒輪、等速萬向節內星輪等系列化零件。

15 、A bevel gear that permits rotation of two shafts at different speeds,used on the rear axle of automobiles to allow wheels to rotate at different speeds on curves.───允許不同速度的桿狀物旋轉的錐齒輪，汽車后部的輪軸允許車輪以不同速度旋轉。

16 、The calculation method of bevel lead column's diameter can improve the property of mould,ensuring the reliability of withdrawal core mechanism.───提出的斜導柱直徑計算方法能在保證抽芯機構可靠性的前提下，提高模具的工作性能。

17 、The rear axles are attached to the wheels and have bevel side gears on their inner ends.───后橋與車輪相連，內端裝有一個半軸錐齒輪。

18 、Based on the tooth face equation of bi-arc bevel gear,the tooth face,the tooth and the whole gear are drawn to testify the correctness of the tooth face equations.───以雙圓弧錐齒輪的齒面方程為依據，繪制出雙圓弧錐齒輪的齒面、輪齒及整個齒輪的圖形，從一側面驗證了齒面方程的正確性。

19 、Collocation must be brushed with bevel angle when using, can use the vertex damage on filling camber, or pure with will enhance eyebrow quality.───使用時必須與斜角刷搭配，可用來補眉形上的缺角，或單純用來加強眉色。

20 、The formula fits with the laboratory data well in some condition, and corrects the mistake that the deflect degree only increases while the bevel increases.───公式經與前人的試驗資料驗證，一定范圍內吻合良好，并依據公式更正了此前流向偏轉角度隨斜交角度的增大而增大的錯誤認識。

21 、A pair of meshing straight bevel gears is presented by the method for precise modeling of gear in PRO/E. Then by the excellent data exchange interface between PRO/E and MSC.───在PRO/E中運用齒輪精確建模的方法生成一對嚙合直齒圓錐齒輪,然后利用PRO/E與MSC.

22 、By virtue of modern metallograph analyse technology,the size of grain,hardness and residual stress of bevel gear by closed-die cold forging is studied.───借助現代冶金分析技術對閉塞冷鍛行星齒輪的晶粒尺寸、硬度變化和殘余應力分布規律進行了研究。

23 、Follow the images below for the settings of the Layer Style. We will be using Drop Shadow, Inner Shadow, Outer Glow, Bevel and Emboss and Color Overlay.───依照下面的圖片設置圖層的風格。我們將要使用投影，內陰影，外發光，斜面和浮雕和顏色疊加。

24 、It is pointed out that the bevel gear integral error measuring technology, which was invented in China, is a powerful tool to realize the local interchange of bevel gears.───指出我國發明的錐齒輪整體誤差測量技術是實現錐齒輪局部互換的有力工具。

25 、We need to apply the following Bevel and Emboss style to get there.Let's see the settings.───我們需要應用“斜面和浮雕”樣式獲取更好的效果。

26 、E. After the skin has been punctured, with the bevel of the needle upward, expel the skin plug that may occlude the needle.───在刺穿皮膚之后，將針的斜面向上，排出可能堵塞針頭的皮膚。

27 、Sprial bevel gear transmission in neotype hard gear surface and forced lubrecation are used to have steady transmission, low noise and long life.───傳動裝置采用新型硬齒面螺旋傘齒輪副傳動并強制潤滑，傳動平穩、噪音小、壽命長。

28 、Based on the local synthesis method,the tooth cutting of non-zero modified spiral bevel gear was researched.───借助于局部綜合法,研究了非零變位弧齒錐齒輪的切齒設計。

29 、Blade forged of high quality carbon steel, property hardened for durable, sharp cutting edge, Highly polished, Handle of selected hardwood.Supplied with square edge and bevelled edge semicircle.───刃口系優質碳鋼經鍛打制成,硬度適中,刃口鋒利,堅固耐用,全部拋光,硬木柄,刀杠為平邊和斜邊、半圓三種。

30 、Priciples of cutting epicycloid bevel gear by continuous indexing method are investigated systematically.───對擺線齒錐齒輪連續分類法銑齒原理進行了系統研究。

31 、According to part drawing of spiral bevel driven gear of automotive final drive, the preformed blank and experimental die have been designed and manufactured.───摘要根據汽車后橋從動螺旋傘齒輪的鍛件圖設計并制造了預制坯和輾壓試驗模具；

32 、Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible.───揭示了使用復動閉式模鍛模具成形小錐角螺旋傘齒輪的可行性。

33 、Bevel Specifies a beveled join.───指定成斜角的聯接。

34 、What is noticeable is: to bevel gear, the corresponding teeth shape is bigger to the modulus and reference circle in formula 1 and 2.───值得注意的是對于斜輪而言,公式1和2中的模數和分度圓直徑所對應的形更大。

35 、On this basis, a kind of symmetry bevel automatic welding equipment with vertical and horizontal tracking system is designed, which has met the production requirement well.───在此基礎上設計并研制了具有高度和橫向跟蹤的兩側對稱斜角自動焊設備，較好地滿足了生產需求。

36 、Use a layer with multiply mode and a Bevel and Emboss layer style to apply more details in your surfaces, but use a bright colour when drawing to keep transparency.───我傾向于在拖延前止步很久，因為它太容易丟失過詳細木制樣式。上下簡單的高光，看看木材參考圖片了解樣式。

37 、A slanting surface or bevel on the edge of a cutting tool, such as a chisel.───刃角如鑿子等刃具邊緣上的斜面或斜角

38 、In order to improve the dimensional accuracy and surface ro ughness of Direct Rapid Metal Tooling(DRMT), a laser bevel cutting technique for DRMT was proposed.───為提高直接快速制造金屬模具的尺寸精度與表面光潔度,提出了面向金屬模具快速制造的激光傾斜切割光整工藝。

39 、Elliptical wound on the frontal bone with the reverse beveling.─── 額骨上有橢圓形的反斜面傷口

40 、GK serial helical bevel geared motor has high efficiency and long service life gear. It has feet panels arrangement, flange arrangement and shaft arrangement.───GK系列弧齒錐-斜齒輪減速電機具有高效率和長壽命齒輪，有腳板式安裝、法蘭式安裝和軸裝式。

41 、Deviation measurement of tooth thickness and conical point of straight bevel gear by using steel bail was studied and approached.───對鋼球法測量直齒圓錐齒輪齒厚及錐項位置誤差檢測進行了研究和探討。

42 、A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.───建立了直齒圓柱齒輪、斜齒圓柱齒輪、直齒圓錐齒輪、斜齒同錐齒輪的統一模型。

43 、On this basis,a kind of symmetry bevel automatic welding equipment with vertical and horizontal tracking system is designed,which has met the ...───在此基礎上設計并研制了具有高度和橫向跟蹤的兩側對稱斜角自動焊設備,較好地滿足了生產需求。

44 、This paper presents a simple and practical calculation method of bevel wheel shaving industrial art of electrochimistry by using the theroy of electric field controll.───提出簡便實用的斜齒輪修形量計算方法,并運用電場控制理論完善了電化學修形工藝。

45 、When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.───提出了一種在初始設計階段就可保證弧齒錐齒輪具有預期加載接觸性能的主動設計方法，并將其用于某航空發動機中央傳動弧齒錐齒輪的齒面綜合。

46 、The inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application.───推導基于工程應用的直齒圓錐齒輪嚙合面的數學模型。

47 、In this paper calculation formulas of differential change gear raito and index change gear raito for Oerlikon and Klingelnerg bevel gear generating machines are derived.───導出奧利康和克林根貝爾格錐齒輪銑齒機差速掛輪比和分齒掛輪比計算通式；

48 、Preset, reflection, and bevel effects are not available for all chart elements.───所有圖表元素都不能使用預設、映像和凹凸效果。

49 、It puts forward an innovative modeling method of spiral bevel gears base on UG, which realizes the initiative control of gear contact area.───摘要介紹了一種基于UG的接觸區主動控制的弧齒錐齒輪建模方法。首先使用成形法得到大輪；

50 、When ordering bevel gear actuators, specify mounting position as second line information.───如果是訂購錐齒輪執行器，請在第二行增加安裝位置信息。

51 、The errors of the bevel gear was expressed with a new form, that was the deviation of real tooth surfaces from the theoretical ones were measured by an invented new kind of measuring device.───摘要提出一種新的齒輪誤差測量方法，即以實際齒面上的點相對于對應理論齒面上點的法向偏移量為齒輪誤差。

52 、The normal work of gear and bearing must be ensured only when the active bevel gear bearing been preloaded, or early wear and tear of the gear and bearing will happen.───16、機械類： 主動錐齒輪軸承必須有預緊負荷才能保證齒輪及軸承的正常工作，否則，將會(huì )引起齒輪及軸承的早期磨損。

53 、Technically, your grip is defined by which bevel (or bevels) of the tennis racket handle your heel pad and index knuckle rest on.───握拍就是將你的掌跟和食指關節放在拍柄的某一個面上。

54 、Bevel edge cutter: More aggressive thanks to new blade configuration.───傾斜的切割面：全新的刀片形狀使得其更加銳利。

55 、The main products are: S series helical gears - worm reducer, K series of spiral bevel gear reducer, R Series helical gears Hardened gear reducer, F series parallel shaft helical gear reducer.───主要產品有：S系列斜齒輪-蝸輪減速機，K系列螺旋錐齒輪減速機，R系列斜齒輪硬齒面齒輪減速機，F系列平行軸斜齒輪減速機。

56 、The state of art of bevel gear measuring technology and features of different measuring methods are analysed, and the conception of local interchangeability of bevel gears is proposed.───分析了錐齒輪測量技術的發展現狀及各種測量方法的特點，并提出了錐齒輪局部互換性的概念。

57 、The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.───介紹了斜齒輪塑件注射成型模具的齒形型腔旋轉式和斜齒輪塑件旋轉式兩類脫模機構設計。

58 、The rear axles are attached to the wheels and have bevel side gears on their inner ends. The differential case is assembled on the left axle But can rotate on a bearing independently of the axle.───后橋與車輪相連,內端裝有一個半軸齒輪。差速器殼支承在左側車橋上,而且能夠在軸承上做獨立轉動。

59 、The seat is of circular bevel type and the disc drops in or out of contact without rubbing or sliding.───圓盤斜角形閥座和漏斗形閥瓣結合和分離期間都不會(huì )出現摩擦或滑動接觸。

60 、In the making-up with cutting edge as the curves for nanoscience and bevelled edge strickle fotographic, strickle with the side.───在拆版后，用刃口為圓弧型的手術刀把膠片邊際刮成斜面，奪目，要刮帶有藥膜的那一邊。

61 、The four main types of gears (spur, helical, worm, and bevel)and a rack and pinion are shown in Figure 7.───圖7所示是四種主要的齒輪（巨齒輪，斜齒輪，蝸輪和傘齒輪）以及齒條和小齒輪。

62 、Remember, watch your bevel, and be careful about the width.─── 記住 看準斜角 注意它的寬度

63 、Our company supply: helical gears, bevel gear series, Worm Gear series, gear box series, cycloid-round series, CVT series and various combinations of cut and speed series.───我公司供應：斜齒輪、傘齒輪系列，蝸輪蝸桿系列，齒輪箱系列，擺線針輪系列，無級變速系列及各種組合減、變速系列。

64 、The principle and method of the ultrasonic lapping of bevel gears are presented and introduced.───介紹了超聲研齒的原理與方法,對超聲研齒振動子系統進行了研究與分析。

65 、Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.───應用阻尼合金材料制作工業平縫機傘齒輪代替鋼質齒輪。

66 、The CAD system of bevel pin core pulling mechanism has been successfully developed on the SolidWorks 2003 platform,in which the design was based on KBE technology,C++6.0 was chosen as programming language and COM technology was used.───介紹了在SolidWorks 2003開發平臺上,依據KBE技術的設計思想,選用Visual C++6.0為編程語言,運用COM技術的斜銷抽芯機構計算機輔助設計系統的開發。

67 、Our main products: reducer, gear motor, bevel gear, worm-gear motor, cycloidal reducer and variator.───公司主要產品有：齒輪減速機；蝸輪蝸桿減速機；螺旋傘齒輪減速機；擺線針輪減速機及無級變速器。

68 、According to the equations, the solid models of a pair of loxodrome normal circular-arc spiral bevel gear are given by using APDL language and the modeling function in ANSYS.───基于數學方程,利用ANSYS的APDL語言和實體造型功能建立齒輪的實體模型。

69 、Bevel gears: gears which connect two shafts at right angles.───傘齒輪:連接直角相交兩軸的齒輪。

70 、Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.───如果采用正齒輪(SGA)或復合傘齒輪(BGA)附件，則可以在圖1中顯示的各個位置安裝手輪。

71 、This research results were applied to the design and manufacture of pneumatic system on numerical control spiral bevel gear lapping machine.───對數控螺旋錐齒輪研齒機的氣動系統進行了研究與設計,取得了成功。

72 、The permutation of small size ceramic tile changes richer, still can use bevel edge, diagonally means laid, can build distinct adornment effect, suit Europe type style especially decorate.───小尺寸瓷磚的排列變化更豐富，還可以用斜邊、對角的方式鋪設，能夠營造獨特的裝飾效果，尤其適合歐式風格的裝修。

73 、To bevel the edges of for joining with a miter joint.───將端邊切成斜角拼接

74 、The two side sections slide open to reveal a retractable storage space with drop front, and a third section lifts to reveal a bevelled mirrored reverse.───雙方部分幻燈片開放，呈現出可伸縮的存儲空間與前下降，第三部分升降機揭示了斜切鏡像扭轉。

75 、Warren stabbed your hu*and in the arm with the bevel knife.─── Warren用斜面刀刺傷了你丈夫的胳膊

76 、ILIH block can be successfully accomplished from any point if the needle bevel lies between the two muscle planes above and below the internal oblique.───ILIH阻滯在上述三種位點都可以成功得完成,只要針的斜面在內斜肌以上或以下兩塊肌平面之間。

77 、Loxodrome normal circular-arc spiral bevel gear transmission is a typical engineering application based on the principle of Betrand conjugate surface.───斜航式法向圓弧螺旋錐齒輪傳動是貝特朗曲面原理指導下的一類典型工程實現,可望為中大型錐齒輪傳動提供一種新技術原型。

78 、After you have achieved the shape you need, double-click the layer to enter the Blending Options and add a Bevel and Emboss with the settings shown below.───做好要用的形狀后，雙擊這個新層，然后到斜面和浮雕選項，如圖所示加上效果。

79 、New desigh: With sealed oil-bath gear box, steel bevel gears, good lubrication condition, Aut-dripping lubricated system.───全新設計：車頭封閉式游浴傳動箱，斜齒鋼齒輪，油泵循環潤滑，自動滴油系統。

80 、But in actual applications, spiral bevel gears on rigs are often damaged.───但在實際應用中，鉆機中弧齒圓錐齒輪常損壞。

81 、Set layer blend mode to screen (this will make black dots invisible).Then, use layer effects (such as inner glow, drop shadow, bevel and emboss) to make dots look like bubbles.───將圖層混合模式設置為濾色（這會(huì )讓黑色的點不可見），然后應用圖層樣式（內發光，投影，斜面和浮雕）讓圓點看起來更像泡泡。

82 、See Actuators &Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.───參閱執行機構和附件章節，了解：傘齒輪，正齒輪，鏈輪，馬達或缸體執行機構；旁路，排泄，或輔助管路；特殊填料，等等。

83 、Double bevel edge wheel No.───雙斜邊一號砂輪。

84 、In this paper, the metal flow route during closed die extrusion for spiral bevel driving gear of automotive final drive is analyzed and the profile of preformed blank has been designed.───摘要分析了主動螺旋傘齒輪閉塞擠壓的金屬流動路線，設計了預制坯的形狀。

85 、Based on genetic algorithm, the paper gives a optimization method for the design of spiral bevel gear with high tooth, which reaches the goal of high contact ratio.───摘要提出一種基于遺傳算法的高齒弧齒錐齒輪的優化設計方法，該方法應用于實例計算，取得了比較好的效果，達到了大重合度的設計目標。

滑板輪怎么樣性能的才好

建議你去咨詢下江西匯賢聚氨酯有限公司，輪子的外型影響到滑行效果，主要有輪徑（Diameter）、接觸寬度（Contact Patch）和側邊形狀（Edge）三個因素。輪徑是相當重要的，一般來說大輪滑行比較快，而小輪加速快，因為小輪啟動時阻力小而大輪在同樣轉速時滑行速度較快。在一定的滑行速度下大輪隨轉速增加造成的軸承磨損更小，對于長板來說尤為如此。大輪在粗糙路面的滑行更快，幾毫米的差異即可大相徑庭。路面可以看做由相對輪子的眾多微小石頭障礙組成，可根據路面情況選擇輪子的外徑，輪徑越大通過障礙的能力越強，不過這和在滑板公園等光滑表面越過障礙不是**事情。聚氨脂輪子可做到99毫米直徑，但板面過低及使用活頭橋時可能造成咬輪現象。 接觸寬度是指滑行時輪子與地面接觸的寬度，越寬則抓地性能越好，也不容易打滑或局部磨損。窄輪不結實并容易打滑，由于壓強過大而易于磨損或局部磨損。輪子的側邊形狀影響到側滑時的效果及抓地力，主要有以下三種情況。

1.矩形側邊（Square edge）

矩形側邊不容易打滑，利于回轉和割滑等滑行方式，矩形輪子與地面的充分接觸能提供良好的抓地力。

2.斜角側邊（Bevelled edge）

介于矩形側邊和弧行側邊之間，輪子截面成斜角狀，抓地力遜于矩形側邊但比弧行側邊要好些。

3.弧型側邊（Radiussed edge）

弧型側邊的輪子適合側滑等滑行，當然也更容易打滑。側滑或慢速滑行時容易造成這種輪子減速，抓地性較差。側邊弧度大的輪子耐磨損使用壽命長，但抓地力不如小半徑弧邊。而有的輪子用久了看似有弧邊，其實是由于滑行時路面的障礙和坑洼磨損造成的。

滑板輪怎么樣性能的才好

PU輪的才好，而且要高彈，耐磨，硬度在88A左右，里面沒氣泡，外面無毛躁，透明的還要看輪芯地方是否有白斑，有白斑的為劣質品