?clamping

clamping發音

[klæmpiŋ]

英：　　美：

clamping中文意思翻譯

箝位

clamping常見例句

1 、Various types of screws are used to clamp machine parts together.───各種型號的螺釘被用來緊固機器部件。

2 、Advanced clamp box design, it can compact seal layer.───先進印墊夾盒設計,能很好的壓緊印章墊。

3 、Use CUL-Type Beam Clamp can fixed to H-Beam as Purlin of Piping.───可卡在鋼梁上成為吊桿生根件。

4 、The separated, strengthened clamper ensures certainly clamping and unclamping.───分離式強力卸扣裝置，確?？煽繆A持和卸扣；

5 、A 2" to 1.25" clamping ring adapter is also provided.───一個2"-1.25"個**適配器也被提供。

6 、Can be fitted in two different ways; clamp and wall fitting are included.───可以?xún)煞N不同的方式安裝;含夾具和墻面固定件。

7 、There has been much tax evasion, but they are going to clamp down.───偷稅漏稅的現象甚多，他們打算加以制止。

8 、In the school shop it is used for projects like hammer heads and clamp parts.───在校辦工廠里由它制作錘頭和夾具之類的產品。

9 、That's why he wears a bag over the clamp.─── 所以他會(huì )在夾子上套個袋子

10 、Response time than Zener diode. Zener diode has a higher clamping voltage and heat dissipation is slower.───與傳統的齊納二極管相較,瞬態電壓抑制二極管的。

11 、It's too high. It's too high to clamp, too.─── 太靠上了 也沒法用止血鉗

12 、This is where the motor would normally be clamped on.─── 發動機平時會(huì )被 固定在這里

13 、Back in our kitchen, we constructed a primitive incubator from an empty fish aquarium, clamping a reflector light to its upper rim.───回到廚房后，我們用空魚缸做了個簡陋的孵卵箱，上緣夾著一盞反射燈。

14 、Turning, grinding, drilling and rubbing on one machine, in one clamping.───在一臺機床上通過一次裝夾可以進行車削,磨削,鉆孔和鉸孔。

15 、The average CPB time was 116.7minutes and aortic clamping tim was 76.1minutes.───體外循環時間平均為116.7min、主動脈阻斷平均為 76.1min ;

16 、Thank you. I'll hold the clamp, you tie.─── 謝謝 我拿鉗子 你來打結

17 、The clamp frame of probe can be clasp on many pipes to measuring temperature of outside surfaces.───夾鉗形探頭能夾住各種管道,適用測量各種管道外表溫度。

18 、A clamp used to regulate or close a flexible tube,especially in laboratory apparatus.───彈簧鋏用來調整或關閉柔軟管道的夾子，尤指實驗室設備。

19 、They clamp down on pickpockets.───他們嚴禁扒竊。

20 、Full set of operators and functions for handling 2D vectors;full set of operators for ARGB color calculations;hardware color conversion;color clamping.───完全按照操作者和2D向量處理功能設定；完全按照操作者的ARGB色彩進行考慮；硬件色彩轉換；色彩固定。

21 、They are busy clamping down the deck.───他們正在忙著沖刷甲板。

22 、Be sure to clamp down the cover on the Boat.───一定要將船蓋箝緊。

23 、Two-jaw hydraulic clamping ,the workpiece sawing not loose,pressure loss avoided bandsaw,band saw protection.───雙鉗口液壓夾緊,鋸切下的工件不會(huì )松動,避免壓損鋸帶,保護鋸帶.

24 、On CNC lathe and automatic lathe , use the power chuck to realize the clamping automatically of the work piece .───在CNC車床和自動車床上,使用液壓動力卡盤來實現工件的自動夾緊。

25 、Quick and simple clamping is achieved by using a friction taper that provides sufficient torque transmission.───在有足夠的帶動轉矩時,采用摩擦圓錐體使夾緊快速又方便.

26 、All we do is make an incision and clamp the bleeding.─── 我們只要切個口子 止血就好

27 、The oversized speed clamp that you sent appears to work fine. Thanks for the quick response to my problem!───你所寄送的快速鉗十分好用,謝謝你們迅速的回應。

28 、A frame with an adjustable part to hold pieces together; a clamp.───夾,鉗一種有一個可調整部分的能把東西夾在一起的架子;鉗子。

29 、A new-designed traceless clamping system is introduced in this article.───介紹了自行設計、研制的一種無痕裝夾系統。

30 、A frame with an adjustable part to hold pieces together;a clamp.───夾，鉗一種有一個可調整部分的能把東西夾在一起的架子；鉗子

31 、Clove is Japanese famous comic group CLAMP's classic work.───三葉草是日本著名漫畫團體CLAMP經典作品。

32 、The strengthened clamper ensures certainly clamping and unclamping.───強力卸扣裝置，確保卸扣萬無一失；

33 、She managed to clamp her anger down.───她設法壓制了她的怒火。

34 、Wide profile processing range due to convenient locating and clamping device setting.───壓緊與**裝置上、下、可調，可適用于各種規格、截面的型材，通用性強。

35 、Tighten clamp, but do not overtighten.───夾緊夾子，但是不要過緊。

36 、A suit of fixing position plate for base structure clamp compact crossbeam.───底架夾具壓緊梁**擋塊一套。

37 、Entry clamp with longitudinal and cross traverse.───可縱向、橫向運行的進口夾鉗

38 、I'll find the bleeder and clamp it off.─── 我來找出血點 然后夾住它

39 、The suspect confessed before he was punished with the clamping rods.───夾棍還沒上，犯人已經招供了。

40 、He used a clamp to hold the arm on the chair until the glue dried.───他用夾子將扶手夾在椅子上, 直到膠水干后再取下。

41 、Bench tools, garden tools and clamp.───臺式工具，園林工具，手工夾。

42 、The interchangeable suction cup and mounting clamp give you more fun.───聽覺、視覺及觸覺刺激加強小朋友對外的認識。

43 、It isn't hard to do, she said, bending over. You just take this so, fasten it with this clamp, and start the machine.───“這不難做的，”她彎下腰說道，“你這樣拿著這個，用這個夾子把它夾住，然后開動機器?！?/p>

44 、The base structure clamp gooseneck gate plank is broadened by.───底架夾具鵝頸龍門支架加寬。

45 、The contact area between clamp and terminal is either silver or copper.───夾頭和電極之間的接觸面是銀的或銅的。

46 、"It requires a lot of know-how and hand-eye coordination," Porterfield said of patch clamping.───當離子通過一個細胞的隔膜時，離子通道和泵會(huì )產生一個不同的電壓，細胞通過這種方式制造能量轉移電信號。

47 、When Gallagher held it closer, the dog moved suddenly, clamping his powerful jaws on the heavy wire mesh.───加拉赫將毛巾放得更近一些時，他猛地竄上來,用有力的嘴咬住笨重的鐵絲網。

48 、Asphyxia as caused by clamping of the trachea also induced some elevation of intraocular pressure.───如使實驗動物遭受窒息，其眼壓亦見上升。窒息較久，其眼壓亦更較升高。

49 、SMC/DMC molded products: Widely used in electrical field such as bus bar clamp.───廣泛地適用于電器制品，防眩板，母線夾，電表箱，井蓋等制品。

50 、Simple clamping, smooth and hi-precision cutting.───型材夾緊簡單,刀具運動切割平穩,保證切割精度。

51 、In using an injection moulding machine, it is best to use the minimal but adequate clamping force F.───使用注射成型機，最好使用最小同時充足的鎖模力F。

52 、Top and bottom shoes or parallels will be provided with 2"clamping height surface and 1" slots for bolts.───上下墊腳應有2”高的裝夾面以及1”的螺絲固定槽。

53 、Otherswere reluctant to clamp down.───但很多人卻不愿意官方上否決。

54 、Slide the clamp up and center over the largest barb.───將夾子滑上并將最大的倒鉤處于中心位置。

55 、the more I feel them judging, the more I clamp up.─── 我越覺得他們在評判我 我就越緊張

56 、To fasten, grip, or support with or as if with a clamp.───以鉗子轉緊用鉗子或類似于用鉗子來固定、抓緊或支持

57 、He sold his new clamp gram garment before three weeks.───他在三周前賣掉了他的新夾克衫。

58 、Accordingly,actions for modification of the defective clamping and centering types of the hot-centering machine ar...───因此針對現有熱定心夾緊方式和定心方式的兩大問題,提出了一些改進的措施。

59 、To clamp(the teeth) together.───咬（牙）把（牙齒）緊咬在一起

60 、International news: To complete clinical resection of liver tumor applied by Qu's hepatic flow clamping !───國際新聞：曲式肝血流阻斷法在臨床成功完成數例肝臟腫瘤切除！

61 、Size and grade specific cap bolts offer superior clamping force between the cap and base.───座罩螺栓有不同的尺寸和等級,在座罩和基礎之間形成理想的夾持力。

62 、Two-jaw hydraulic clamping facilitate gripper material suitable die cutting materials.───雙鉗口液壓夾緊,方便夾持物料,適合模具材料切割.

63 、A clamp used to regulate or close a flexible tube, especially in laboratory apparatus.───彈簧鋏用來調整或關閉柔軟管道的夾子，尤指實驗室設備

64 、The structure of the shearing die,running on common use press,with radial clamping for round bar was introduced.───介紹了一種用在通用沖床上的徑向夾緊圓鋼剪切模的結構、工作原理和設計制造要點。

65 、Smaller taper angle of collet, larger clamping power.───彈性套錐形角更小，故夾緊力更大。

66 、The structure and usage of clamping device of scalper for aluminum stock are introduced in the paper.───介紹了鋁板錠銑床夾緊裝置的結構和用途,找出了存在的問題,提出了完善的方案。

67 、An internal Zener clamp protects against over-voltage conditions on the supply line.───內部齊納鉗位功能可提供電源線過電壓保護。

68 、The oversized speed clamp that you sent appears to work fine... Thanks for the quick response to my problem!───你所寄送的快速鉗十分好用，謝謝你們迅速的回應。

69 、Two-jaw hydraulic clamping suitable for die cutting materials,facilitate the clamping materials.───雙鉗口液壓夾緊,適合模具材料切割,便于夾緊物料.

70 、To design the clamp and attached equipment, help production to improve the efficiency.───工裝夾具的設計與改良,以方便生產提高效率。

71 、Selected HAFU DIE HEAD clamping appaaratus,changing filter and eliminating plastic easily.───哈夫模頭夾，便于更換濾網和清潔模頭。

72 、Its lower end is anchored at the erection truss by a clamp.───其下端由一夾鉗錨定在施工桁梁上。

73 、The cable entry is sealing ring clamp nut with good sealing performance.───引入裝置為密封圈壓緊螺母式,密封性能好。

74 、Fixture optimization aims at obtaining the most suitable fixture layout and clamping forces.───夾具優化旨在得到最合理的夾具布局和夾緊力。

75 、An internal centre aligns the pinion shaft. The clamping function occurs by means of a tapered collet activated by machine hydraulics.───內部的頂心用于小齒輪定心.筒夾通過機床液壓系統操縱,實現夾緊,帶動小齒輪軸轉動.

76 、Wrap-around Side Clamp Device: Help make perfect lasting on waist area.───包覆式壓邊裝置---挾持楦頭**穩固，內腰弧度更佳緊密貼實。

77 、E. With container at hip level, open clamp and begin instillation.───容器置于臀部水平位置，打開夾子開始灌腸。

78 、A graduated button on the thread clamp and a finger guard on the presser foot to make operation easy.───為方便操作，配置了有刻度的夾線按鈕，壓腳上裝了為安全專設的擋指架。

79 、Mold opening/closing mechanism: double fulcrums and single toggle pneumatic + mechanical clamping device.───4.開合模機構：采用雙支點單曲肘的氣動+機械式合模裝置。

80 、We take the clamp off, he bleeds to death.─── 我們撤掉夾子 他就會(huì )失血過多而死

81 、her cigarette clamped in a curious holder.─── 吸著的香煙加在一個古怪的煙斗上

82 、Another consideration is slippage, which might occur at a clamp or joint .───另外一個要考慮的問題是滑移?；瓶赡墚a(chǎn)生于夾緊或聯結處。

83 、To prevent damage, the observer will choose a friction clamp or better still an adjustable clamping ring.───為防止損壞，觀測者應采用摩擦夾緊方式，用可調夾圈更好。

84 、Who clamped the kid who went up? I did.─── 誰給上樓的那個孩子夾的止血鉗 我

85 、Preparing the clamping and measuring ways and tools for manufacturing the workpiece.───為零件的制造編制裝夾和測量的方法和工具工裝。

86 、The analysis result indicates that it is an effective method to apply FEA-based optimization in the design of clamping claw.───分析結果表明，將基于有限元分析的優化技術應用于夾緊爪的設計是一種有效的方法。

87 、Designed a kind of lathe clamp that can adjust eccentricity.───介紹一種能對偏心距進行調整的車夾具。

88 、The weather is clamping down over the mountains.───山上天低云暗。

89 、Install battery hold down clamp, making sure that it is properly positioned on battery.───安裝電瓶固定夾時，請確認其已正確固定于電瓶。

90 、Choosing a PIMM simply on the basis of shot weight is too simplistic.Neither is clamping force alone sufficient.───僅僅基于射出重量去選擇注塑機是不夠的，同樣的，僅考慮鎖模力也不可以。

臥式注塑機定義是什么？英文專業外貿用語定義這么寫？

中文定義

臥式注塑機(horizontal injection molding machine)其合模部分和注射部分處于同一水平中心線上，且模具是沿水平方向打開的。其特點是：機身矮，易于操作和維修；機器重心低，安裝較平穩；制品頂出后可利用重力作用自動落下，易于實現全自動操作。其缺點是：模具安裝比較麻煩，嵌件發表過如模具有傾斜或落下之可能，機床占地面積較大。目前，市場上的注塑機多采用此種型式。

英文定義

The mold clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its advantages are: short body, easy to operate and maintain; with a low center of gravity, the installation is more stable; products after the ejection can fall automatically with the gravity action so that it is easy to achieve fully automatic operation. The disadvantages are: mold installation is too trouble, the insert has been published as the mold may tilt or fall, the machine covers a large area. Currently, this type is more used on the injection molding machine market.

FANUC series oi Mate-MD報警信息序號ex1023 sp tool clamping faled是什么情況？

1023是機床廠家自定義的報警，看字面意思是主軸刀具夾緊失敗。

1.看看氣源是否正常，打刀缸是否動作正常。

2.檢查刀具拉緊檢測開關是否正常（一般在打刀氣缸上）。