1、Ruel

Ruel發音

英：　　美：

Ruel中文意思翻譯

常見釋義：

n.（Ruel）人名；（法）呂埃爾；（西、意）魯埃爾

Ruel雙語使用場景

1、Durand-Ruel, a Paris dealer, packed his bags with 300 Impressionist paintings-including piles of Renoirs, Pissarros and Sisleys-to take to America.───巴黎商人保羅·杜蘭德-魯埃爾，用袋子裝了300多幅印象派畫作——包括成堆的雷諾阿、畢沙羅及西斯萊等大家的作品——帶到美國。

2、Alice, prepare breakfast, and Ruel, look after the baby.───艾麗斯你準備早飯，魯爾，你照看孩子。

Ruel相似詞語短語

1、ruel out───魯埃爾出去了

2、機械專業翻譯（不要軟件翻譯的）

1 Scope and field of application

The general manufacturing specifications are a complement to the stipulations shown on the standard sheets and drawings. This nut standard consists of dimensions tables, drawings and manufacturing specifications. The manufacturing specifications, in turn, consist both of general specifications applying to all types of nut and also special specifications applying for each individual type of nut.

1 應用范圍

通用制造說明做為補充條款已在標準圖紙中示出，螺母的加工標準中包括尺寸表、圖紙和制造技術要求。技術要求依次包括能用在所有類型螺母的一般技術要求和用在每個特別類型螺母的特殊技術要求。

Nuts shall be made cold-pressed or forged. In those cases where the above manufacturing procedure is not economically justifiable (e. g. , small batches) the nuts may be turned.The surfaces of the nuts shall be flat with well-formed and chamfered corners and must be free from flash, mill scale, sharp edges or other defects which may lessen their usability.

On cold-headed nuts which are not to be heat treated are allowed smaller cracks on the bearing surface and flats under condition that these cracks do not effect the properties of the nut or its usability. Exceptions to this ruel concerning any cracks must be stated on the respective drawing or table.Nuts shall be delivered well cleaned and, unless sur-face treatment is specified, well protected against rust through coating with a rust-proofing fluid 98730-04 according to STD 1287,3

2 Requirements 要求

螺母應冷壓或鍛造加工，那樣按以上加工步驟制造的螺母不經濟（例如，小批量的螺母加工），螺母也可能卷刃。螺母表面應形狀良好平直，倒角必須無毛刺、鐵屑，銳邊，其他瑕疵盡量縮小至可用范圍內。不能做熱處理的冷壓六角螺母允許在其支撐面和平面處有較小的裂紋，且裂紋不影響螺母的性能或可用性。除非這些裂縫已分別在圖紙和圖表中已有規定，按照STD 1287,3防銹液98730-04 的規定，交貨的螺母應該清潔完好除非按規定做過表面處理，螺母還應按照STD 1287,3防銹液98730-04 的規定給螺母涂層以做好防銹保護。