?camshaft

camshaft發音

英：　　美：

camshaft中文意思翻譯

常見釋義：

n.[機]凸輪軸

camshaft雙語使用場景

1、Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.───其他可能的原因包括油泵問題、桿和主軸承的空隙、凸輪軸停止工作、或者凸輪的方位和升降。

2、Camshaft is one of the key parts of the engine, which is widely used in automobiles, motorcycles, and other machinofacture industries.───凸輪軸是汽車、摩托車、機械制造等行業的一種量大而廣的機械零件，是發動機的關鍵零件之一。

3、On stripping down a damaged motor, the tappets are invariably found to be heavily pitted and bits of metal broken off the camshaft lobes.───拆解報廢的發動機就會(huì )發現推桿無一例外地存在嚴重的麻坑及從凸輪軸凸輪脫落的金屬磨屑。

4、eccentric may be part of the camshaft itself or may bolt to it.───偏心輪可能與凸輪軸是一體的，也可能是通過螺釘連接的。

5、In its initial stage the change-of the camshaft is performed.───在他的初始階段凸輪軸的轉換被執行。

6、Camshaft is one of the key components of the Engine, and its contour accuracy has a direct impact on performance and life of the engine.───凸輪軸是發動機的關鍵零部件之一，其輪廓精度直接影響到發動機的性能和壽命。

7、The front timing cover and and a finished camshaft with timing gear on the end.───前面的時間和范圍，并完成與凸輪軸齒輪的時間就結束。

8、This grinding has its merits, but its force fluctuates greatly and the trace of vibration appears on the surface of the camshaft.───這種磨削加工工藝有一定的優勢，但同時會(huì )在被加工表面留下往復振蕩的痕跡及出現磨削力的波動較大等現象和問題。

9、Properly inoculant amount was used to reduce the chill depth of the cam during the production of chilled iron camshaft.───在激冷鑄鐵凸輪軸生產過程中，適當地加入孕育劑可以有效減小桃尖處白口深度。

camshaft相似詞語短語

1、comp cams───補償凸輪

2、destin cams───命運攝像機

3、comp cams website───comp cams網站

4、blackmailing scams───勒索詐騙

5、wingdingcurtake camsn───翼頂凸輪

6、Cams───n.凸輪（cam的復數）

7、gunflint webcams───gunflint網絡(luò )攝像頭

8、fueler cams───加油機凸輪

9、abay cams live───abay cams現場直播

10、Sex cams───性愛攝像機

DOHC是什么意思

轎車發動機按照頂置凸輪軸的數目，分為單頂置凸輪軸(SOHC)和雙頂置凸輪軸(DOHC)，由于中高檔轎車發動機一般是多氣門及V型氣缸排列，需采用雙凸輪軸分別控制。